- 25 3月, 2015 11 次提交
-
-
由 Matt Caswell 提交于
Ensure RAND_bytes return value is checked correctly, and that we no longer use RAND_pseudo_bytes. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Filled in lots of return value checks that were missing the GOST engine, and added appropriate error handling. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Fix miscellaneous NULL pointer derefs in the sureware engine. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
In ssl3_send_new_session_ticket the message to be sent is constructed. We skip adding the length of the session ticket initially, then call ssl_set_handshake_header, and finally go back and add in the length of the ticket. Unfortunately, in DTLS, ssl_set_handshake_header also has the side effect of buffering the message for subsequent retransmission if required. By adding the ticket length after the call to ssl_set_handshake_header the message that is buffered is incomplete, causing an invalid message to be sent on retransmission. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
In DTLS, immediately prior to epoch change, the write_sequence is supposed to be stored in s->d1->last_write_sequence. The write_sequence is then reset back to 00000000. In the event of retransmits of records from the previous epoch, the last_write_sequence is restored. This commit fixes a bug in DTLS1.2 where the write_sequence was being reset before last_write_sequence was saved, and therefore retransmits are sent with incorrect sequence numbers. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Start ensuring all OpenSSL "free" routines allow NULL, and remove any if check before calling them. This gets DH_free, DSA_free, RSA_free Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Thanks to the change of mkdef.pl, a few more deprecated functions were properly defined in util/libeay.num. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
For the moment, this is specially crafted for DECLARE_DEPRECATED because that's where we found the problem, but it can easily be expanded to other types of special delarations when needed. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Disable loop checking when we retry verification with an alternative path. This fixes the case where an intermediate CA is explicitly trusted and part of the untrusted certificate list. By disabling loop checking for this case the untrusted CA can be replaced by the explicitly trusted case and verification will succeed. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 24 3月, 2015 18 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
If a set of certificates is supplied to OCSP_basic_verify use those in addition to any present in the OCSP response as untrusted CAs when verifying a certificate chain. PR#3668 Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Move EVP internals to evp_int.h, remove -Ievp hack from crypto/Makefile Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Move ASN.1 internals used across multiple directories into new internal header file asn1_int.h remove crypto/Makefile hack which allowed other directories to include "asn1_locl.h" Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
Start ensuring all OpenSSL "free" routines allow NULL, and remove any if check before calling them. This gets ASN1_OBJECT_free and ASN1_STRING_free. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Mike Frysinger 提交于
Fix compilation failure when SCTP is compiled due to incorrect define. Reported-by: NConrad Kostecki <ck+gentoobugzilla@bl4ckb0x.de> URL: https://bugs.gentoo.org/543828 RT#3758 Signed-off-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Thanks to a -I.., the path does work, at least on unix. However, this doesn't work so well on VMS. Correcting the path to not rely on given -I does work on both. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Remove old ASN.1 COMPAT type. This was meant as a temporary measure so older ASN.1 code (from OpenSSL 0.9.6) still worked. It's a hack which breaks constification and hopefully nothing uses it now, if it ever did. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Kurt Roeckx 提交于
It was saying that it was an illegal parameter / unsupported cipher Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Kurt Roeckx 提交于
The certificate already contains the DH parameters in that case. ssl3_send_server_key_exchange() would fail in that case anyway. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Kurt Roeckx 提交于
Also removes for it being NULL Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Remove x_exten.c and x_exten.o from crypto/asn1/Makefile: they've moved now. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Fix missing return value check in dtls1_listen when calling SSL_clear(). Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 3月, 2015 11 次提交
-
-
由 Matt Caswell 提交于
Change ssl_set_handshake_header from return void to returning int, and handle error return code appropriately. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Ensure that all libssl functions called from within the apps have their return values checked where appropriate. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Ensure that all functions have their return values checked where appropriate. This covers all functions defined and called from within libssl. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Mark most functions returning a result defined in any libssl header file with __owur to warn if they are used without checking the return value. Use -DUNUSED_RETURN compiler flag with gcc to activate these warnings. Some functions returning a result are skipped if it is common and valid to use these functions without checking the return value. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
In order to receive warnings on unused function return values the flag -DDEBUG_UNUSED must be passed to the compiler. This change adds that for the --strict-warnings Configure option. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Follow up on the earlier "Do not keep TABLE in version control". Actually removing TABLE from version control was forgotten. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Don't check that the curve appears in the list of acceptable curves for the peer, if they didn't send us such a list (RFC 4492 does not require that the extension be sent). Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Remove {i2d,d2i}_ASN1_BOOLEAN. Rewrite single occurrence of d2i_ASN1_BOOLEAN in asn1_parse2 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Dr. Stephen Henson 提交于
Remove old M_ASN1_ macros and replace any occurences with the corresponding function. Remove d2i_ASN1_bytes, d2i_ASN1_SET, i2d_ASN1_SET: no longer used internally. Reviewed-by: NRich Salz <rsalz@openssl.org>
-