The cms_SignerInfo_content_sign() function allocated an EVP_MD_CTX but
then failed to free it on an error path.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The cms_RecipientInfo_pwri_crypt() allocated an EVP_CIPHER_CTX but then
failed to free it in some error paths. By allocating it a bit later that
can be avoided.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

In BN_generate_prime_ex() we do some sanity checks first and return
with an error if they fail. We should do that *before* allocating any
resources to avoid a memory leak.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

In the BN_mpi2bn() function, a failure of a call to BN_bin2bn() could
result in the leak of a previously allocated BIGNUM value.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

During construction of a mem BIO we allocate some resources. If this
allocation fails we can end up leaking everything we have allocated so
far.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

When setting an accepted socket for non-blocking, if the operation fails
make sure we close the accepted socket.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

BIO_sock_error() returned 1 when getsockopt() fails when it should
return the error code for that failure.

Additionally, the optlen parameter to getsockopt() has to point at
the size of the area that the optval parameter points at rather than
zero.  Some systems may forgive it being zero, but others don't.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The traditional private key encryption algorithm doesn't function
properly if the IV length of the cipher is zero. These ciphers
(e.g. ECB mode) are not suitable for private key encryption
anyway.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

We must test for new object == current object, not !=.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Coverity reports a potential NULL deref when "2 0 0" DANE trust-anchors
from DNS are configured via SSL_dane_tlsa_add() and X509_STORE_CTX_init()
is called with a NULL stack of untrusted certificates.

Since ssl_verify_cert_chain() always provideds a non-NULL stack of
untrusted certs, and no other code path enables DANE, the problem
can only happen in applications that use SSL_CTX_set_cert_verify_callback()
to implement their own wrappers around X509_verify_cert() passing
only the leaf certificate to the latter.

Regardless of the "improbability" of the problem, we do need to
ensure that build_chain() handles this case correctly.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

The diverse {RSA,DSA,DH}_set0_* functions are made to allow some
parameters to be NULL IF the corresponding numbers in the given key
structure have already been previously initialised.  Specifically,
this allows the addition of private components to be added to a key
that already has the public half, approximately like this:

    RSA_get0_key(rsa, NULL, &e, NULL);
    RSA_get0_factors(rsa, &p, &q);
    /* calculate new d */
    RSA_set0_key(rsa, NULL, NULL, d);
Reviewed-by: NMatt Caswell <matt@openssl.org>

Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.

X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

A bug meant that SSL_CTRL_SET_MAX_SEND_FRAGMENT was not adjusting
split_send_fragment properly.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The variables in the BIO weren't being duplicated properly.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Passing the -stdin arg to the passwd command line app *and* supply a
password on the command line causes a seg fault.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

RT#4520
Reviewed-by: NTim Hudson <tjh@openssl.org>

Commit d32f5d87 added a 'goto end;' statement
at the end of the code block for the 'end' label.  Fortunately, it was after a
return statement, so no infinite loop occurred, but it is still dead code.

Remove the extra goto statement as cleanup.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.

X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

The i2d_X509() function can return a negative value on error. Therefore
we should make sure we check it.

Issue reported by Yuan Jochen Kang.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

It was added as part of 2df84dd3
but has never actually been used for anything; presumably it was
a typo for one of SCTP or CT.

This removes the last '??' entry from INSTALL.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Commit d064e6ab removed all the
OPENSSL_NO_SHA guards, but commit
a50ad1da regenerated some due to the
sha entries in the %md_disabler table in apps/progs.pl.

Update %md_disabler to reflect that sha is not disableable, and
remove OPENSSL_NO_SHA for good.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Even though no test could be found to trigger this, paper-n-pencil
estimate suggests that x86 and ARM inner loop lazy reductions can
loose a bit in H4>>*5+H0 step.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

And recycle some disused slots.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

In the case of generating a file like this:

    GENERATE[foo.S]=mkfoo.pl arg1 arg2

the 'mkfoo.pl' generator itself might need to include other files,
such as perl modules within our source tree.  We can reuse already
existing syntax for it, like this:

    INCLUDE[mkfoo.pl]=module/path

or:

    DEPEND[mkfoo.pl]=modules/mymodule.pm

This change implements the support for such constructs, and for the
DEPEND statement, for any value that indicates a perl module (.pm
file), it will automatically infer an INCLUDE statement for its
directory, just like it does for C header files, so you won't have do
write this:

    DEPEND[mkfoo.pl]=modules/mymodule.pm
    INCLUDE[mkfoo.pl]=modules
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Thanks to Brian Carpenter for finding and reporting this.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

IBM argues that in certain scenarios capability query is really
expensive. At the same time it's asserted that query results can
be safely cached, because disabling CPACF is incompatible with
reboot-free operation.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Fix a bug introduced by 6903e2e7 (Extended EC_METHOD customisation
support., 2016-02-01). key->meth->set_private() is wrongly called where
it should call key->group->meth->set_private().

PR#4517
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Bad ASN.1 data should never be able to trigger a malloc failure so return
an error in d2i_test if a malloc failure occurs.
Reviewed-by: NRichard Levitte <levitte@openssl.org>