- 10 8月, 2021 1 次提交
-
-
由 HJ 提交于
Signed-off-by: NHJ <huangjun42@huawei.com>
-
- 17 3月, 2020 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NPaul Yang <kaishen.yy@antfin.com> (Merged from https://github.com/openssl/openssl/pull/11344)
-
- 27 2月, 2020 1 次提交
-
-
由 h00416433 提交于
Description:openssl 1.1.1d used bu libhapverify Team:OTHERS Feature or Bugfix:Feature Binary Source:Yes, it is PrivateCode(Yes/No):No Change-Id: I8968f9c0f146b587da17a3e603bd04fb7b4c505b Reviewed-on: http://mgit-tm.rnd.huawei.com/7842784Tested-by: Npublic jenkins <public_jenkins@notesmail.huawei.com> Reviewed-by: Nhouyuezhou 00386575 <hou@huawei.com> Reviewed-by: Nlinyibin 00246405 <linyibin@huawei.com> Reviewed-by: Nweiping 00548480 <ping.wei@huawei.com>
-
- 21 2月, 2020 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTomas Mraz <tmraz@fedoraproject.org> Reviewed-by: NDmitry Belyavskiy <beldmit@gmail.com> (Merged from https://github.com/openssl/openssl/pull/10882)
-
- 06 11月, 2019 1 次提交
-
-
由 Richard Levitte 提交于
If no connection could be made, addr_iter will eventually end up being NULL, and if the user didn't check the returned error value, the BIO_CONN_S_CONNECT code will be performed again and will crash. So instead, we add a state BIO_CONN_S_CONNECT_ERROR that we enter into when we run out of addresses to try. That state will just simply say "error" back, until the user does something better with the BIO, such as free it or reset it. Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/10333)
-
- 28 9月, 2019 1 次提交
-
-
由 Dr. Matthias St. Pierre 提交于
Apart from public and internal header files, there is a third type called local header files, which are located next to source files in the source directory. Currently, they have different suffixes like '*_lcl.h', '*_local.h', or '*_int.h' This commit changes the different suffixes to '*_local.h' uniformly. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/9681)
-
- 27 4月, 2018 1 次提交
-
-
由 FdaSilvaYY 提交于
Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6085)
-
- 03 4月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5851)
-
- 28 3月, 2018 2 次提交
-
-
由 Rich Salz 提交于
Based on the description in https://github.com/openssl/openssl/pull/5757, this re-implements the "allow NULL to be passed" behavior of a number of xxx_free routines. I also fixed up some egregious formatting errors that were nearby. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5761)
-
由 Matt Caswell 提交于
This removes some code because we cannot trace the original contributor to get their agreement for the licence change (original commit e03ddfae). After this change there will be numerous failures in the test cases until someone rewrites the missing code. All *_free functions should accept a NULL parameter. After this change the following *_free functions will fail if a NULL parameter is passed: BIO_ACCEPT_free() BIO_CONNECT_free() BN_BLINDING_free() BN_CTX_free() BN_MONT_CTX_free() BN_RECP_CTX_free() BUF_MEM_free() COMP_CTX_free() ERR_STATE_free() TXT_DB_free() X509_STORE_free() ssl3_free() ssl_cert_free() SSL_SESSION_free() SSL_free() [skip ci] Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5757)
-
- 18 12月, 2017 1 次提交
-
-
由 Daniel Bevenius 提交于
This commit adds comments to bio_method_st definitions where the function pointers are defined as NULL. Most of the structs have comments but some where missing and not all consitent. CLA: trivial Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4881)
-
- 16 12月, 2017 1 次提交
-
-
由 Bernd Edlinger 提交于
Rename bio_info_cb to BIO_info_cb. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4493)
-
- 18 10月, 2017 1 次提交
-
-
由 KaoruToda 提交于
Since return is inconsistent, I removed unnecessary parentheses and unified them. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4541)
-
- 09 10月, 2017 1 次提交
-
-
由 KaoruToda 提交于
unified them. - return (0); -> return 0; - return (1); -> return 1; - return (-1); -> return -1; Reviewed-by: NStephen Henson <steve@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4500)
-
- 28 2月, 2017 1 次提交
-
-
由 Todd Short 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2781)
-
- 28 10月, 2016 2 次提交
-
-
由 Matt Caswell 提交于
Also extend BIO_METHOD to be able to supply an implementation for the new BIO_write_ex function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Also extend BIO_METHOD to be able to supply an implementation for the new BIO_read function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 21 4月, 2016 1 次提交
-
-
由 Davide Galassi 提交于
The state was always set to BIO_CONN_S_OK. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 22 3月, 2016 1 次提交
-
-
由 David Benjamin 提交于
BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the built-in method tables to live in .rodata. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 2月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Remove some duplicated NULL/zero init. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 04 2月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Richard Levitte 提交于
Future commits will change our use to newer functions and the pragmas will go away at that time. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 27 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
This was done by the following find . -name '*.[ch]' | /tmp/pl where /tmp/pl is the following three-line script: print unless $. == 1 && m@/\* .*\.[ch] \*/@; close ARGV if eof; # Close file to reset $. And then some hand-editing of other files. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 17 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} Add #define's for the old names. Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 03 11月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
BIO_int_ctrl isn't made for the purpose BIO_get_conn_int_port used it for. This also changes BIO_C_GET_CONNECT to actually return the port instead of assigning it to a pointer that was never returned back to the caller. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 05 10月, 2015 1 次提交
-
-
由 Andy Polyakov 提交于
Even though SOCKET is effectively declared as (void *) on Windows, it's not actually a pointer, but an index within per-process table of kernel objects. The table size is actually limited and its upper limit is far below upper limit for signed 32-bit integer. This is what makes cast in question possible. Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 03 9月, 2015 1 次提交
-
-
由 Rich Salz 提交于
There are many places (nearly 50) where we malloc and then memset. Add an OPENSSL_zalloc routine to encapsulate that. (Missed one conversion; thanks Richard) Also fixes GH328 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 14 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
There are header files in crypto/ that are used by a number of crypto/ submodules. Move those to crypto/include/internal and adapt the affected source code and Makefiles. The header files that got moved are: crypto/cryptolib.h crypto/md32_common.h Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 11 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 06 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr) for memset and memcpy. Remove needless casts for those functions. For memset, replace alternative forms of zero with 0. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 05 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
For a local variable: TYPE *p; Allocations like this are "risky": p = OPENSSL_malloc(sizeof(TYPE)); if the type of p changes, and the malloc call isn't updated, you could get memory corruption. Instead do this: p = OPENSSL_malloc(sizeof(*p)); Also fixed a few memset() calls that I noticed while doing this. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 01 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 29 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Following ANSI C rules, remove the casts from calls to OPENSSL_malloc and OPENSSL_realloc. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 13 1月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This last one for this ticket. Removes WIN16. So long, MS_CALLBACK and MS_FAR. We won't miss you. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 12月, 2014 1 次提交
-
-
由 Rich Salz 提交于
This commit removes MPE/iX Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 07 10月, 2013 1 次提交
-
-
由 Ben Laurie 提交于
-
- 03 2月, 2006 1 次提交
-
-
由 Nils Larsch 提交于
-