- 19 3月, 2018 8 次提交
-
-
由 Kurt Roeckx 提交于
Since the public and private DRBG are per thread we don't need one per ssl object anymore. It could also try to get entropy from a DRBG that's really from an other thread because the SSL object moved to an other thread. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NMatthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/5547)
-
由 Kurt Roeckx 提交于
This avoids lock contention. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NMatthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/5547)
-
由 Jack Lloyd 提交于
Without actually using EVP_PKEY_FLAG_AUTOARGLEN Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4793)
-
由 Jack Lloyd 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4793)
-
由 Jack Lloyd 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4793)
-
由 Andy Polyakov 提交于
Current endianness detection is somewhat opportunistic and can fail in cross-compile scenario. Since we are more likely to cross-compile for little-endian now, adjust the default accordingly. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5613)
-
由 Bernd Edlinger 提交于
Don't pass a pointer to uninitialized processed value for BIO_CB_READ and BIO_CB_WRITE Check the correct cmd code in BIO_callback_ctrl Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5516)
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5665)
-
- 18 3月, 2018 1 次提交
-
-
由 Dr. Matthias St. Pierre 提交于
- d2i_PKC8PrivateKey -> d2i_PKCS8PrivateKey - bechmark -> benchmark - ciperhsuite -> ciphersuite - EncyptedPreMasterSecret -> EncryptedPreMasterSecret Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5570)
-
- 17 3月, 2018 6 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5653)
-
由 Kurt Roeckx 提交于
There is a requirements of having access to a live entropy source which we can't do with the default callbacks. If you need prediction resistance you need to set up your own callbacks that follow the requirements of NIST SP 800-90C. Reviewed-by: NDr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> GH: #5402
-
由 Kurt Roeckx 提交于
Reviewed-by: NDr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> GH: #5402
-
由 Bernd Edlinger 提交于
Reviewed-by: NMatthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NBen Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/5646)
-
由 Bernd Edlinger 提交于
Fixes: #5567 Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5624)
-
由 Dr. Matthias St. Pierre 提交于
This commit adds a new api RAND_DRBG_set_defaults() which sets the default type and flags for new DRBG instances. See also #5576. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5632)
-
- 16 3月, 2018 1 次提交
-
-
由 Dr. Matthias St. Pierre 提交于
Fixes #4403 This commit moves the internal header file "internal/rand.h" to <openssl/rand_drbg.h>, making the RAND_DRBG API public. The RAND_POOL API remains private, its function prototypes were moved to "internal/rand_int.h" and converted to lowercase. Documentation for the new API is work in progress on GitHub #5461. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5462)
-
- 15 3月, 2018 10 次提交
-
-
由 Matt Caswell 提交于
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per feedback. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Not all algorithms will support this, since their keys are not a simple block of data. But many can. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Pauli 提交于
Added two missing OIDs for AES-{128,256}-XTS. Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5622)
-
- 14 3月, 2018 4 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5616)
-
由 Matt Caswell 提交于
With the current mechanism, old cipher strings that used to work in 1.1.0, may inadvertently disable all TLSv1.3 ciphersuites causing connections to fail. This is confusing for users. In reality TLSv1.3 are quite different to older ciphers. They are much simpler and there are only a small number of them so, arguably, they don't need the same level of control that the older ciphers have. This change splits the configuration of TLSv1.3 ciphers from older ones. By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable them through your existing config. Fixes #5359 Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5392)
-
由 Andy Polyakov 提交于
Unlike "upstream", Android NDK's arm64 gcc [but not clang] performs 64x64=128-bit multiplications with library calls, which appears to have devastating impact on performance. [The condition is reduced to __ANDROID__ [&& !__clang__], because x86_64 has corresponding assembly module.] Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5589)
-
由 Andy Polyakov 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5589)
-
- 13 3月, 2018 6 次提交
-
-
由 Tim Hudson 提交于
As per discussion with Peter Sylvester Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5603)
-
由 Richard Levitte 提交于
When OPENSSL_DIR_read implemented by LPdir_unix.c gets a Unixy path, it will return file names like you'd expect them on Unix. However, if given a path with VMS syntax, such as "[.foo]", it returns file names with generation numbers, such as "bar.txt;1", which makes sense for VMS expectations, but can be surprising for OpenSSL. Our solution is to simply shave off the generation number if OPENSSL_DIR_read() expects there should be one, and make sure not to return the same file name twice. Note that VMS filesystems are case insensitive, so the check for duplicate file names are done without regard to character case. Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5587)
-
由 Richard Levitte 提交于
non-VMS syntax inclusion paths get the same treatment as on Unix. Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5587)
-
由 Matt Caswell 提交于
We should be using ASN1_OBJECT_free() not OPENSSL_free(). Fixes #5568 Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5597)
-
由 Matt Caswell 提交于
If a mem allocation failed we would ignore it. This commit fixes it to always check. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5596)
-
由 gmile 提交于
Original source: https://github.com/dstucrypt/openssl-dstu/commit/2c5fc4c92b8244c5026f4f871eb9497f9c28d5af Full list of OIDs is available on related enactment page at http://zakon2.rada.gov.ua/laws/show/z0423-17 CLA: trivial Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5216)
-
- 12 3月, 2018 1 次提交
-
-
由 Andy Polyakov 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 3月, 2018 3 次提交
-
-
由 Dr. Matthias St. Pierre 提交于
The introduction of thread local public and private DRBG instances (#5547) makes it very cumbersome to change the reseeding (time) intervals for those instances. This commit provides a function to set the default values for all subsequently created DRBG instances. int RAND_DRBG_set_reseed_defaults( unsigned int master_reseed_interval, unsigned int slave_reseed_interval, time_t master_reseed_time_interval, time_t slave_reseed_time_interval ); The function is intended only to be used during application initialization, before any threads are created and before any random bytes are generated. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5576)
-
由 Benjamin Kaduk 提交于
The get_name() helper was using a variable of type size_t to hold the result of BIO_gets(), but BIO_gets() returns int and makes use of negative values to indicate error conditions. Change the type of the local variable to match, and propagate that through to other places in the file to avoid -Wsign-compare issues. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5211)
-
由 Todd Short 提交于
Add functions that will do the work of assigning certificate, privatekey and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the publickey. This will permit the keys to pass validation for both ECDSA and RSA. If a private key has already been set for the certificate, it is discarded. A real private key can be set later. This is an all-or-nothing setting of these parameters. Unlike the SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions, the existing cert or privatekey is not modified (i.e. parameters copied). This permits the existing cert/privatekey to be replaced. It replaces the sequence of: * SSL_use_certificate() * SSL_use_privatekey() * SSL_set1_chain() And may actually be faster, as multiple checks are consolidated. The private key can be NULL, if so an ENGINE module needs to contain the actual private key that is to be used. Note that ECDH (using the certificate's ECDSA key) ciphers do not work without the private key being present, based on how the private key is used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NBen Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/1130)
-