- 21 7月, 2016 2 次提交
-
-
由 Kurt Roeckx 提交于
llvm's ubsan reported: runtime error: negation of -9223372036854775808 cannot be represented in type 'long'; cast to an unsigned type to negate this value to itself Found using afl Reviewed-by: NRich Salz <rsalz@openssl.org> GH: #1325
-
由 Kurt Roeckx 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> GH: #1330
-
- 20 7月, 2016 23 次提交
-
-
由 Dr. Stephen Henson 提交于
To avoid having to immediately free up r/s when setting them don't allocate them automatically in DSA_SIG_new() and ECDSA_SIG_new(). RT#4590 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
On non-Windows platforms, shared libraries are both development and runtime files. We only installed them as development files, this makes sure they get installed as runtime files as well. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
This is adapted from BoringSSL commit 2f87112b963. This fixes a number of bugs where the existence of bbio was leaked in the public API and broke things. - SSL_get_wbio returned the bbio during the handshake. It must always return the BIO the consumer configured. In doing so, some internal accesses of SSL_get_wbio should be switched to ssl->wbio since those want to see bbio. - The logic in SSL_set_rfd, etc. (which I doubt is quite right since SSL_set_bio's lifetime is unclear) would get confused once wbio got wrapped. Those want to compare to SSL_get_wbio. - If SSL_set_bio was called mid-handshake, bbio would get disconnected and lose state. It forgets to reattach the bbio afterwards. Unfortunately, Conscrypt does this a lot. It just never ended up calling it at a point where the bbio would cause problems. - Make more explicit the invariant that any bbio's which exist are always attached. Simplify a few things as part of that. RT#4572 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Emilia Kasper 提交于
Systematically test every server-side version downgrade or upgrade. Client version upgrade or downgrade could be tested analogously but will be done in a later change. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 FdaSilvaYY 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1292)
-
由 FdaSilvaYY 提交于
Fix some indentation at the same time Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1292)
-
由 Hannes Magnusson 提交于
f0e0fd51 added X509_STORE_CTX_set_verify_cb with a typedef'd argument, making the original one redundant. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 FdaSilvaYY 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
由 FdaSilvaYY 提交于
Fix some code indentation Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
由 FdaSilvaYY 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
由 FdaSilvaYY 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
由 FdaSilvaYY 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
由 Todd Short 提交于
There are two failure cases for OCSP_request_add_id(): 1. OCSP_ONEREQ_new() failure, where |cid| is not freed 2. sk_OCSP_ONEREQ_push() failure, where |cid| is freed This changes makes the error behavior consistent, such that |cid| is not freed when sk_OCSP_ONEREQ_push() fails. OpenSSL only takes ownership of |cid| when the function succeeds. Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1289)
-
由 Dr. Stephen Henson 提交于
RT#4600 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Dr. Stephen Henson 提交于
RT#4610 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Coty Sutherland 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1312)
-
由 Richard Levitte 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Richard Levitte 提交于
That way, we have a way to check if the init function was successful or not. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Richard Levitte 提交于
Because pthread_once() takes a function taking no argument and returning nothing, and we want to be able to check if they're successful, we define a few internal macros to get around the issue. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 19 7月, 2016 15 次提交
-
-
由 Rich Salz 提交于
Update find-doc-nits to find errors in SYNOPSIS (the most common place where they were missing). Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
The new fuzzing code broke no-cms Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
- Always process ALPN (previously there was an early return in the certificate status handling) - Don't send a duplicate alert. Previously, both ssl_check_clienthello_tlsext_late and its caller would send an alert. Consolidate alert sending code in the caller. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Emilia Kasper 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 mrpre 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1281)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
After the refactor of tls_process_key_exchange(), this commit tidies up some loose ends. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Continuing from the previous commit. Refactor tls_process_key_exchange() to split out into a separate function the ECDHE aspects. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Continuing from the previous commit. Refactor tls_process_key_exchange() to split out into a separate function the DHE aspects. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Continuing from the previous commit. Refactor tls_process_key_exchange() to split out into a separate function the SRP aspects. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The tls_process_key_exchange() function is too long. This commit starts the process of splitting it up by moving the PSK preamble code to a separate function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The function tls_process_key_exchange() is too long. This commit moves the PSK preamble processing out to a separate function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Narrow the scope of the local vars in preparation for split up this function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-