Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

With the new threads API, this is no longer needed.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The Engine API lost the setting of memory management hooks in
bind_engine.  Here's putting that back.

EX_DATA and ERR functions need the same treatment.
Reviewed-by: NMatt Caswell <matt@openssl.org>

For assembler, we want the final target to be foo.s (lowercase s).
However, the build.info may have lines like this (note upper case S):

    GENERATE[foo.S]=foo.pl

This indicates that foo.s (lowercase s) is still to be produced, but
that producing it will take an extra step via $(CC) -E.  Therefore,
the following variants (simplified for display) can be generated:

    GENERATE[foo.S]=foo.pl  =>  foo.s: foo.pl
                                	$(PERL) $foo.pl $@.S; \
                                	$(CC) $(CFLAGS) -E -P $@.S > $@ && \
                                	rm -f $@.S

    GENERATE[foo.s]=foo.pl  =>  foo.s: foo.pl
                                	$(PERL) $foo.pl $@

    GENERATE[foo.S]=foo.m4  =>  foo.s: foo.m4
                                	m4 -B 8192 $foo.m4 > $@.S; \
                                	$(CC) $(CFLAGS) -E -P $@.S > $@ && \
                                	rm -f $@.S

    GENERATE[foo.s]=foo.m4  =>  foo.s: foo.m4
                                	m4 -B 8192 $foo.m4 > $@
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Compiling ssltest with some compilers using --strict-warnings results in
complaints about an unused result.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Use new Thread API style locks, and thread local storage for mem_dbg
Reviewed-by: NRich Salz <rsalz@openssl.org>

Also removed a bunch of unused define's from e_os.h
Reviewed-by: NRichard Levitte <levitte@openssl.org>

With the unified build scheme, tar MUST recurse, or the tarball will
be empty.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

The EC code recently started using REF_PRINT_COUNT and REF_ASSERT_ISNT.
Those are defined in e_os.h.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

This adds a new accessor function DSA_SIG_get0.
The customisation of DSA_SIG structure initialisation has been removed this
means that the 'r' and 's' components are automatically allocated when
DSA_SIG_new() is called. Update documentation.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Travis doesn't seem to know about 'expr'
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

This may speed up our builds considerably
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Make all scripts produce .S, make interpretation of $(CFLAGS)
pre-processor's responsibility, start accepting $(PERLASM_SCHEME).
[$(PERLASM_SCHEME) is redundant in this case, because there are
no deviataions between Solaris and Linux assemblers. This is
purely to unify .pl->.S handling across all targets.]
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

The summary on how to add configs and how Makefile et al wasn't quite
correct any more.
Reviewed-by: NRich Salz <rsalz@openssl.org>

* Perform ALPN after the SNI callback; the SSL_CTX may change due to
  that processing
* Add flags to indicate that we actually sent ALPN, to properly error
  out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Add functions to determine authentication, key-exchange, FIPS and AEAD.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

CCA8, CCA9, CCAA, CCAB, CCAC, CCAD, and CCAE are now present in
https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml
so remove the "as per draft-ietf-tls-chacha20-poly1305-03" note
accordingly.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>