Signed-off-by: Ncode4lala <fengziteng2@huawei.com>
Change-Id: I5269be7d8e6c8ac399d86d9b48bfbd5cfabe0d19

Signed-off-by: Ncode4lala <fengziteng2@huawei.com>

Signed-off-by: Ncode4lala <fengziteng2@huawei.com>

Signed-off-by: NHJ <huangjun42@huawei.com>

Description:openssl 1.1.1d used bu libhapverify
Team:OTHERS
Feature or Bugfix:Feature
Binary Source:Yes, it is
PrivateCode(Yes/No):No

Change-Id: I8968f9c0f146b587da17a3e603bd04fb7b4c505b
Reviewed-on: http://mgit-tm.rnd.huawei.com/7842784Tested-by: Npublic jenkins <public_jenkins@notesmail.huawei.com>
Reviewed-by: Nhouyuezhou 00386575 <hou@huawei.com>
Reviewed-by: Nlinyibin 00246405 <linyibin@huawei.com>
Reviewed-by: Nweiping 00548480 <ping.wei@huawei.com>

Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like

  '*_lcl.h', '*_local.h', or '*_int.h'

This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)

Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:

While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.

To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:

  #include "internal/file.h"      # located in 'include/internal'
  #include "internal/file_int.h"  # located in 'crypto/include/internal'

This commit moves the private crypto headers from

  'crypto/include/internal'  to  'include/crypto'

As a result, the include directives become unambiguous

  #include "internal/file.h"       # located in 'include/internal'
  #include "crypto/file.h"         # located in 'include/crypto'

hence the superfluous '_int.h' suffixes can be stripped.

The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)

Fixes: #8737
Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
GH: #8741
(cherry picked from commit 70b0b977f73cd70e17538af3095d18e0cf59132e)

Reviewed-by: NKurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8365)

(cherry picked from commit 049e64cbb08df1fbf256bb79e950e8d0959de091)

Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5990)

Almost all *alloc failures now set an error code.
Reviewed-by: NMatthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5842)

As per documentation, the RSA keys should not be smaller than 64bit (the
documentation mentions something about a quirk in the prime generation
algorithm). I am adding check into the code which used to be 16 for some
reason.
My primary motivation is to get rid of the last sentence in the
documentation which suggest that typical keys have 1024 bits (instead
updating it to the now default 2048).
I *assume* that keys less than the 2048 bits (say 512) are used for
education purposes.
The 512 bits as the minimum have been suggested by Bernd Edlinger.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4547)

* Introduce RSA_generate_multi_prime_key to generate multi-prime
  RSA private key. As well as the following functions:
    RSA_get_multi_prime_extra_count
    RSA_get0_multi_prime_factors
    RSA_get0_multi_prime_crt_params
    RSA_set0_multi_prime_params
    RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)

Around 138 distinct errors found and fixed; thanks!
Reviewed-by: NKurt Roeckx <kurt@roeckx.be>
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4223)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3920)

It is not necessary to remove leading zeros here because
RSA_padding_check_PKCS1_OAEP_mgf1 appends them again. As this was not done
in constant time, this might have leaked timing information.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3313)

Reviewed-by: NStephen Henson <steve@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2764)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2236)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2236)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

If a key contains any PSS parameter restrictions set them during
sign or verification initialisation. Parameters now become the
default values for sign/verify. Digests are fixed and any attempt
to change them is an error. The salt length can be modified but
must not be less than the minimum value.

If the key parameters are invalid then verification or signing
initialisation returns an error.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Pad mode setting returns an error if the mode is anything other then PSS.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

New function EVP_PKEY_CTX_md() which takes a string and passes a digest
to a ctrl.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Make RSA method more flexible by using the key type from the
method instead of hard coding EVP_PKEY_RSA: by doing this the
same code supports both RSA and RSA-PSS.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2065)

Also, re-organize RSA check to use goto err.
Add a test case.
Try all checks, not just stopping at first (via Richard Levitte)
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Give the API new names, document it.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: NRichard Levitte <levitte@openssl.org>