Signed-off-by: Ncode4lala <fengziteng2@huawei.com>
Change-Id: I5269be7d8e6c8ac399d86d9b48bfbd5cfabe0d19

Signed-off-by: Ncode4lala <fengziteng2@huawei.com>

Signed-off-by: Ncode4lala <fengziteng2@huawei.com>

Signed-off-by: NHJ <huangjun42@huawei.com>

Reviewed-by: NPaul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11344)

Description:openssl 1.1.1d used bu libhapverify
Team:OTHERS
Feature or Bugfix:Feature
Binary Source:Yes, it is
PrivateCode(Yes/No):No

Change-Id: I8968f9c0f146b587da17a3e603bd04fb7b4c505b
Reviewed-on: http://mgit-tm.rnd.huawei.com/7842784Tested-by: Npublic jenkins <public_jenkins@notesmail.huawei.com>
Reviewed-by: Nhouyuezhou 00386575 <hou@huawei.com>
Reviewed-by: Nlinyibin 00246405 <linyibin@huawei.com>
Reviewed-by: Nweiping 00548480 <ping.wei@huawei.com>

When performing a pkeyutl -verifyrecover operation the input file is not
a hash - it is the signature itself. Therefore don't do the check to make
sure it looks like a hash.

Fixes #9658
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9731)

(cherry picked from commit 5ffc33244cd4d66e47dfa66ce89cb38d0f3074cc)

When signing or verifying a file using pkeyutl the input is supposed to
be a hash. Some algorithms sanity check the length of the input, while
others don't and silently truncate. To avoid accidents we check that the
length of the input looks sane.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)

Give meaningful error messages when the user incorrectly uses pkeyutl.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3987)

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Everything in apps includes apps.h, because that one declares apps
internal library routines.  However, progs.h doesn't declare library
routines, but rather the main commands and their options, and there's
no reason why the library modules should include it.

So, remove the inclusion of progs.h from apps.h and add that inclusion
in all command source files.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)

Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4079)

Standardized the -rand flag and added a new one:
    -rand file...
            Always reads the specified files
    -writerand file
            Always writes to the file on exit

For apps that use a config file, the RANDFILE config parameter reads
the file at startup (to seed the RNG) and write to it on exit if
the -writerand flag isn't used.

Ensured that every app that took -rand also took -writerand, and
made sure all of that agreed with all the documentation.

Fix error reporting in write_file and -rand
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3862)

Mostly braces and NULL pointer check and also copyright year bump
Signed-off-by: NPaul Yang <paulyang.inf@gmail.com>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3657)

In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately, which means
that for engines that don't already have a structural reference
somewhere else (because it's a built in engine), we end up returning
an invalid reference.

Instead, the function release_engine() is added, and called at the end
of the routines that call setup_engine().
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1643)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also gives an error message when you gave it a parameter it didn't expect.
Reviewed-by: NRich Salz <rsalz@openssl.org>

MR: #2009

dgst: using digest instead of specific digest commands
the digest list specified in man dgst may be inaccurate, hence using
digest and referring to the list in digest-commands

'sha' as a digest name is no longer supported

dgst,pkeyutl cmds help cleanup
- In dgst, pkeyutl cmds, some options help was missing.
- fixed a minor typo in openssl.pod, that fixes make install.
- digest-commands was showing ‘sha’, which is not a supported digest
anymore.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also fix option processing in pkeyutl to allow use of (formerly)
"out-of-order" switches that were needless implementation limitations.

Handle documented "ENGINE" form with -keyform and -peerform.

Better handling of OPENSSL_NO_ENGINE and OPENSSL_NO_RSA.

RT2018
Reviewed-by: NRich Salz <rsalz@openssl.org>

continue on from previous commits but in the apps directory
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.

RT#4085
RT#4086
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.

The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: NStephen Henson <steve@openssl.org>

Don't check for NULL before calling OPENSSL_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

No point in proceeding if you're out of memory.  So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This is merges the old "rsalz-monolith" branch over to master.  The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt.  Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that.  There have been many other changes and code-cleanup, see
bullet list below.

Special thanks to Matt for the long and detailed code review.

TEMPORARY:
        For now, comment out CRYPTO_mem_leaks() at end of main

Tickets closed:
        RT3515: Use 3DES in pkcs12 if built with no-rc2
        RT1766: s_client -reconnect and -starttls broke
        RT2932: Catch write errors
        RT2604: port should be 'unsigned short'
        RT2983: total_bytes undeclared #ifdef RENEG
        RT1523: Add -nocert to fix output in x509 app
        RT3508: Remove unused variable introduced by b09eb246
        RT3511: doc fix; req default serial is random
        RT1325,2973: Add more extensions to c_rehash
        RT2119,3407: Updated to dgst.pod
        RT2379: Additional typo fix
        RT2693: Extra include of string.h
        RT2880: HFS is case-insensitive filenames
        RT3246: req command prints version number wrong

Other changes; incompatibilities marked with *:
        Add SCSV support
        Add -misalign to speed command
        Make dhparam, dsaparam, ecparam, x509 output C in proper style
        Make some internal ocsp.c functions void
        Only display cert usages with -help in verify
        Use global bio_err, remove "BIO*err" parameter from functions
        For filenames, - always means stdin (or stdout as appropriate)
        Add aliases for -des/aes "wrap" ciphers.
        *Remove support for IISSGC (server gated crypto)
        *The undocumented OCSP -header flag is now "-header name=value"
        *Documented the OCSP -header flag
Reviewed-by: NMatt Caswell <matt@openssl.org>

EVP_.*free; this gets:
        EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
        EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
        EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Submitted by: Damien Miller <djm@mindrot.org>
Reviewed by: steve

Stop pkeyutl crashing if some arguments are missing. Also make str2fmt
tolerate NULL parameter.