- 26 5月, 2023 1 次提交
-
-
由 code4lala 提交于
Signed-off-by: Ncode4lala <fengziteng2@huawei.com> Change-Id: I5269be7d8e6c8ac399d86d9b48bfbd5cfabe0d19
-
- 12 4月, 2023 2 次提交
-
-
由 code4lala 提交于
Signed-off-by: Ncode4lala <fengziteng2@huawei.com>
-
由 code4lala 提交于
Signed-off-by: Ncode4lala <fengziteng2@huawei.com>
-
- 10 8月, 2021 1 次提交
-
-
由 HJ 提交于
Signed-off-by: NHJ <huangjun42@huawei.com>
-
- 27 2月, 2020 1 次提交
-
-
由 h00416433 提交于
Description:openssl 1.1.1d used bu libhapverify Team:OTHERS Feature or Bugfix:Feature Binary Source:Yes, it is PrivateCode(Yes/No):No Change-Id: I8968f9c0f146b587da17a3e603bd04fb7b4c505b Reviewed-on: http://mgit-tm.rnd.huawei.com/7842784Tested-by: Npublic jenkins <public_jenkins@notesmail.huawei.com> Reviewed-by: Nhouyuezhou 00386575 <hou@huawei.com> Reviewed-by: Nlinyibin 00246405 <linyibin@huawei.com> Reviewed-by: Nweiping 00548480 <ping.wei@huawei.com>
-
- 06 6月, 2018 1 次提交
-
-
由 Georg Schmidt 提交于
Issue a warning when generating DSA or RSA keys of size greater than OPENSSL_DSA_MAX_MODULUS_BITS resp. OPENSSL_RSA_MAX_MODULUS_BITS. Reviewed-by: NPaul Dale <paul.dale@oracle.com> Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/6380)
-
- 01 3月, 2018 1 次提交
-
-
由 Paul Yang 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3709)
-
- 13 2月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 01 2月, 2018 1 次提交
-
-
由 Richard Levitte 提交于
Everything in apps includes apps.h, because that one declares apps internal library routines. However, progs.h doesn't declare library routines, but rather the main commands and their options, and there's no reason why the library modules should include it. So, remove the inclusion of progs.h from apps.h and add that inclusion in all command source files. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5222)
-
- 21 11月, 2017 1 次提交
-
-
由 Paul Yang 提交于
* Introduce RSA_generate_multi_prime_key to generate multi-prime RSA private key. As well as the following functions: RSA_get_multi_prime_extra_count RSA_get0_multi_prime_factors RSA_get0_multi_prime_crt_params RSA_set0_multi_prime_params RSA_get_version * Support EVP operations for multi-prime RSA * Support ASN.1 operations for multi-prime RSA * Support multi-prime check in RSA_check_key_ex * Support multi-prime RSA in apps/genrsa and apps/speed * Support multi-prime RSA manipulation functions * Test cases and documentation are added * CHANGES is updated Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4241)
-
- 18 10月, 2017 1 次提交
-
-
由 KaoruToda 提交于
Since return is inconsistent, I removed unnecessary parentheses and unified them. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4541)
-
- 21 8月, 2017 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/4201)
-
- 17 7月, 2017 1 次提交
-
-
由 Rich Salz 提交于
Standardized the -rand flag and added a new one: -rand file... Always reads the specified files -writerand file Always writes to the file on exit For apps that use a config file, the RANDFILE config parameter reads the file at startup (to seed the RNG) and write to it on exit if the -writerand flag isn't used. Ensured that every app that took -rand also took -writerand, and made sure all of that agreed with all the documentation. Fix error reporting in write_file and -rand Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3862)
-
- 19 10月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
In apps/apps.c, one can set up an engine with setup_engine(). However, we freed the structural reference immediately, which means that for engines that don't already have a structural reference somewhere else (because it's a built in engine), we end up returning an invalid reference. Instead, the function release_engine() is added, and called at the end of the routines that call setup_engine(). Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1643)
-
- 15 10月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1694)
-
- 16 6月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NStephen Henson <steve@openssl.org> Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 06 4月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Move rsa_st away from public headers. Add accessor/writer functions for the public RSA data. Adapt all other source to use the accessors and writers. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 10 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
This also closes RT 4123 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 07 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 10 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
continue on from previous commits but in the apps directory Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 13 10月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 06 9月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 31 7月, 2015 1 次提交
-
-
由 Adam Eijdenberg 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 16 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
When generating a private key, try to make the output file be readable only by the owner. Put it in CHANGES file since it might be noticeable. Add "int private" flag to apps that write private keys, and check that it's set whenever we do write a private key. Checked via assert so that this bug (security-related) gets fixed. Thanks to Viktor for help in tracing the code-paths where private keys are written. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 29 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 02 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
After the finale, the "real" final part. :) Do a recursive grep with "-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are an "if NULL" check that can be removed. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 01 5月, 2015 2 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
This gets BN_.*free: BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd dead code in engines/e_ubsec. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 26 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 3月, 2015 2 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
Start ensuring all OpenSSL "free" routines allow NULL, and remove any if check before calling them. This gets DH_free, DSA_free, RSA_free Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 13 1月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This last one for this ticket. Removes WIN16. So long, MS_CALLBACK and MS_FAR. We won't miss you. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 19 12月, 2014 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 11 12月, 2014 1 次提交
-
-
由 Rich Salz 提交于
I also replaced some exit/return wrappers in various programs (from main) to standardize on return. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 09 12月, 2014 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 09 9月, 2014 1 次提交
-
-
由 Kurt Roeckx 提交于
This is a more comprehensive fix. It changes all keygen apps to use 2K keys. It also changes the default to use SHA256 not SHA1. This is from Kurt's upstream Debian changes. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 08 1月, 2013 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-