- 03 12月, 2014 2 次提交
-
-
由 Matt Caswell 提交于
automatically updated, and we should use the one provided instead. Unfortunately there are a couple of locations where this is not respected. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
RT#3592 provides an instance where the OPENSSL_assert that this commit replaces can be hit. I was able to recreate this issue by forcing the underlying BIO to misbehave and come back with very small mtu values. This happens the second time around the while loop after we have detected that the MTU has been exceeded following the call to dtls1_write_bytes. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 02 12月, 2014 1 次提交
-
-
由 Kurt Roeckx 提交于
If SSLv2 and SSLv3 are both disabled we still support SSL/TLS. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 29 11月, 2014 3 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Previously, state variant was not advanced, which resulted in state being stuck in the st1 variant (usually "_A"). This broke certificate callback retry logic when accepting connections that were using SSLv2 ClientHello (hence reusing the message), because their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required for the retry code path. Reported by Yichun Zhang (agentzh). Signed-off-by: NPiotr Sikora <piotr@cloudflare.com> Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 28 11月, 2014 8 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Alok Menghrajani 提交于
The current documentation contains a bunch of spelling and grammar mistakes. I also found it hard to understand some paragraphs, so here is my attempt to improve its readability. Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
PR#1767 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
PR#3613 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 27 11月, 2014 7 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 André Guerreiro 提交于
PR#3612 Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Guenter 提交于
Workaround for NetWare CodeWarrior compiler which doesn't properly lookup includes when in same directory as the C file which includes it. PR#3569 Reviewed-by: NStephen Henson <steve@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Minor changes made by Matt Caswell Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Matt Caswell 提交于
Minor changes made by Matt Caswell. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Matt Caswell 提交于
Minor changes made by Matt Caswell. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 26 11月, 2014 2 次提交
-
-
由 Matt Caswell 提交于
PR#3608 Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
PR#3574 Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 21 11月, 2014 4 次提交
-
-
由 Dr. Stephen Henson 提交于
When using the -xcert option to test certificate validity print out if we pass Suite B compliance. We print out "not tested" if we aren't in Suite B mode. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Annie Yousar 提交于
In keygen, return KEY_SIZE_TOO_SMALL not INVALID_KEYBITS. ** I also increased the minimum from 256 to 512, which is now documented in CHANGES file. ** Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
Fix CONF_load_modules to CONF_modules_load. Document that it calls exit. Advise against using it now. Add an error print to stderr. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 20 11月, 2014 11 次提交
-
-
由 David Benjamin 提交于
the session's version (server). See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Matt Caswell 提交于
ECDH_compute_key is silently ignored and the KDF is run on duff data Thanks to github user tomykaira for the suggested fix. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Emilia Kasper 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
once the ChangeCipherSpec message is received. Previously, the server would set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED. This would allow a second CCS to arrive and would corrupt the server state. (Because the first CCS would latch the correct keys and subsequent CCS messages would have to be encrypted, a MitM attacker cannot exploit this, though.) Thanks to Joeri de Ruiter for reporting this issue. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
The server must send a NewSessionTicket message if it advertised one in the ServerHello, so make a missing ticket message an alert in the client. An equivalent change was independently made in BoringSSL, see commit 6444287806d801b9a45baf1f6f02a0e3a16e144c. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
The client sends a session ID with the session ticket, and uses the returned ID to detect resumption, so we do not need to peek at handshake messages: s->hit tells us explicitly if we're resuming. An equivalent change was independently made in BoringSSL, see commit 407886f589cf2dbaed82db0a44173036c3bc3317. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
The same change was independently made in BoringSSL, see commit 9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67 Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
This ensures that it's zeroed even if the SSL object is reused (as in ssltest.c). It also ensures that it applies to DTLS, too. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Dr. Stephen Henson 提交于
If no keyfile has been specified use the certificate file instead. Fix typo: we need to check the chain is not NULL, not the chain file. Reviewed-by: NMatt Caswell <matt@openssl.org> (cherry picked from commit 786370b1b09b919d9306f27336e13783e4fe3fd0)
-
由 Dr. Stephen Henson 提交于
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3 options for s_client/s_server/ssltest. When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3 options. We should document this somewhere, e.g. wiki, FAQ or manual page. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 19 11月, 2014 2 次提交
-
-
由 Dr. Stephen Henson 提交于
Don't send or parse any extensions other than RI (which is needed to handle secure renegotation) for SSLv3. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
The supported signature algorithms extension needs to be processed before the certificate to use is decided and before a cipher is selected (as the set of shared signature algorithms supported may impact the choice). Reviewed-by: NMatt Caswell <matt@openssl.org> (cherry picked from commit 56e8dc542bd693b2dccea8828b3d8e5fc6932d0c) Conflicts: ssl/ssl.h ssl/ssl_err.c
-