Change the DES documentation to reflect the current status. Note that

some password reading functions are really part of the UI
compatibility library...

doc/crypto/des.pod

@@ -9,7 +9,6 @@ DES_cfb_encrypt, DES_ofb_encrypt, DES_pcbc_encrypt, DES_cfb64_encrypt,
 DES_ofb64_encrypt, DES_xcbc_encrypt, DES_ede2_cbc_encrypt,
 DES_ede2_cfb64_encrypt, DES_ede2_ofb64_encrypt, DES_ede3_cbc_encrypt,
 DES_ede3_cbcm_encrypt, DES_ede3_cfb64_encrypt, DES_ede3_ofb64_encrypt,
-DES_read_password, DES_read_2passwords, DES_read_pw_string,
 DES_cbc_cksum, DES_quad_cksum, DES_string_to_key, DES_string_to_2keys,
 DES_fcrypt, DES_crypt, DES_enc_read, DES_enc_write - DES encryption
 
@@ -86,12 +85,6 @@ DES_fcrypt, DES_crypt, DES_enc_read, DES_enc_write - DES encryption
         DES_key_schedule *ks2, DES_key_schedule *ks3, 
         DES_cblock *ivec, int *num);
 
- int DES_read_password(DES_cblock *key, const char *prompt, int verify);
- int DES_read_2passwords(DES_cblock *key1, DES_cblock *key2, 
-        const char *prompt, int verify);
- int DES_read_pw_string(char *buf, int length, const char *prompt,
-        int verify);
-
  DES_LONG DES_cbc_cksum(const unsigned char *input, DES_cblock *output, 
         long length, DES_key_schedule *schedule, 
         const_DES_cblock *ivec);
@@ -234,24 +227,7 @@ DES_ede3_ofb64_encrypt() and DES_ede2_ofb64_encrypt() is the same as
 DES_ofb64_encrypt(), using Triple-DES.
 
 The following functions are included in the DES library for
-compatibility with the MIT Kerberos library. DES_read_pw_string()
-is also available under the name EVP_read_pw_string().
-
-DES_read_pw_string() writes the string specified by I<prompt> to
-standard output, turns echo off and reads in input string from the
-terminal.  The string is returned in I<buf>, which must have space for
-at least I<length> bytes.  If I<verify> is set, the user is asked for
-the password twice and unless the two copies match, an error is
-returned.  A return code of -1 indicates a system error, 1 failure due
-to use interaction, and 0 is success.
-
-DES_read_password() does the same and converts the password to a DES
-key by calling DES_string_to_key(); DES_read_2password() operates in
-the same way as DES_read_password() except that it generates two keys
-by using the DES_string_to_2key() function.  DES_string_to_key() is
-available for backward compatibility with the MIT library.  New
-applications should use a cryptographic hash function.  The same
-applies for DES_string_to_2key().
+compatibility with the MIT Kerberos library.
 
 DES_cbc_cksum() produces an 8 byte checksum based on the input stream
 (via CBC encryption).  The last 4 bytes of the checksum are returned
@@ -330,8 +306,9 @@ implemented this way because most people will be using a multiple of 8
 and because once you get into pulling bytes input bytes apart things
 get ugly!
 
-DES_read_pw_string() is the most machine/OS dependent function and
-normally generates the most problems when porting this code.
+DES_string_to_key() is available for backward compatibility with the
+MIT library.  New applications should use a cryptographic hash function.
+The same applies for DES_string_to_2key().
 
 =head1 CONFORMING TO
 
@@ -357,8 +334,8 @@ already scheduled for removal.
 
 des_cbc_cksum(), des_cbc_encrypt(), des_ecb_encrypt(),
 des_is_weak_key(), des_key_sched(), des_pcbc_encrypt(),
-des_quad_cksum(), des_random_key(), des_read_password() and
-des_string_to_key() are available in the MIT Kerberos library;
+des_quad_cksum(), des_random_key() and des_string_to_key()
+are available in the MIT Kerberos library;
 des_check_key_parity(), des_fixup_key_parity() and des_is_weak_key()
 are available in newer versions of that library.
 

doc/crypto/ui.pod

+=pod
+
+=head1 NAME
+
+UI_new, UI_new_method, UI_free, UI_add_input_string, UI_dup_input_string,
+UI_add_verify_string, UI_dup_verify_string, UI_add_input_boolean,
+UI_dup_input_boolean, UI_add_info_string, UI_dup_info_string,
+UI_add_error_string, UI_dup_error_string, UI_construct_prompt
+UI_add_user_data, UI_get0_user_data, UI_get0_result, UI_process,
+UI_ctrl, UI_set_default_method, UI_get_default_method, UI_get_method,
+UI_set_method, UI_OpenSSL, ERR_load_UI_strings - New User Interface
+
+=head1 SYNOPSIS
+
+ #include <openssl/ui.h>
+
+ typedef struct ui_st UI;
+ typedef struct ui_method_st UI_METHOD;
+
+ UI *UI_new(void);
+ UI *UI_new_method(const UI_METHOD *method);
+ void UI_free(UI *ui);
+
+ int UI_add_input_string(UI *ui, const char *prompt, int flags,
+	char *result_buf, int minsize, int maxsize);
+ int UI_dup_input_string(UI *ui, const char *prompt, int flags,
+	char *result_buf, int minsize, int maxsize);
+ int UI_add_verify_string(UI *ui, const char *prompt, int flags,
+	char *result_buf, int minsize, int maxsize, const char *test_buf);
+ int UI_dup_verify_string(UI *ui, const char *prompt, int flags,
+	char *result_buf, int minsize, int maxsize, const char *test_buf);
+ int UI_add_input_boolean(UI *ui, const char *prompt, const char *action_desc,
+	const char *ok_chars, const char *cancel_chars,
+	int flags, char *result_buf);
+ int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
+	const char *ok_chars, const char *cancel_chars,
+	int flags, char *result_buf);
+ int UI_add_info_string(UI *ui, const char *text);
+ int UI_dup_info_string(UI *ui, const char *text);
+ int UI_add_error_string(UI *ui, const char *text);
+ int UI_dup_error_string(UI *ui, const char *text);
+
+ /* These are the possible flags.  They can be or'ed together. */
+ #define UI_INPUT_FLAG_ECHO		0x01
+ #define UI_INPUT_FLAG_DEFAULT_PWD	0x02
+
+ char *UI_construct_prompt(UI *ui_method,
+	const char *object_desc, const char *object_name);
+
+ void *UI_add_user_data(UI *ui, void *user_data);
+ void *UI_get0_user_data(UI *ui);
+
+ const char *UI_get0_result(UI *ui, int i);
+
+ int UI_process(UI *ui);
+
+ int UI_ctrl(UI *ui, int cmd, long i, void *p, void (*f)());
+ #define UI_CTRL_PRINT_ERRORS		1
+ #define UI_CTRL_IS_REDOABLE		2
+
+ void UI_set_default_method(const UI_METHOD *meth);
+ const UI_METHOD *UI_get_default_method(void);
+ const UI_METHOD *UI_get_method(UI *ui);
+ const UI_METHOD *UI_set_method(UI *ui, const UI_METHOD *meth);
+
+ UI_METHOD *UI_OpenSSL(void);
+
+=head1 DESCRIPTION
+
+UI stands for User Interface, and is general purpose set of routines to
+prompt the user for text-based information.  Through user-written methods
+(see L<ui_create(3)|ui_create(3)>), prompting can be done in any way
+imaginable, be it plain text prompting, through dialog boxes or from a
+cell phone.
+
+All the functions work through a context of the type UI.  This context
+contains all the information needed to prompt correctly as well as a
+reference to a UI_METHOD, which is an ordered vector of functions that
+carry out the actual prompting.
+
+The first thing to do is to create a UI with UI_new() or UI_new_method(),
+then add information to it with the UI_add or UI_dup functions.  Also,
+user-defined random data can be passed down to the underlying method
+through calls to UI_add_user_data.  The default UI method doesn't care
+about these data, but other methods might.  Finally, use UI_process()
+to actually perform the prompting and UI_get0_result() to find the result
+to the prompt.
+
+A UI can contain more than one prompt, which are performed in the given
+sequence.  Each prompt gets an index number which is returned by the
+UI_add and UI_dup functions, and has to be used to get the corresponding
+result with UI_get0_result().
+
+The functions are as follows:
+
+UI_new() creates a new UI using the default UI method.  When done with
+this UI, it should be freed using UI_free().
+
+UI_new_method() creates a new UI using the given UI method.  When done with
+this UI, it should be freed using UI_free().
+
+UI_OpenSSL() returns the built-in UI method (note: not the default one,
+since the default can be changed.  See further on).  This method is the
+most machine/OS dependent part of OpenSSL and normally generates the
+most problems when porting.
+
+UI_free() removes a UI from memory, along with all other pieces of memory
+that's connected to it, like duplicated input strings, results and others.
+
+UI_add_input_string() and UI_add_verify_string() add a prompt to the UI,
+as well as flags and a result buffer and the desired minimum and maximum
+sizes of the result.  The given information is used to prompt for
+information, for example a password, and to verify a password (i.e. having
+the user enter it twice and check that the same string was entered twice).
+UI_add_verify_string() takes and extra argument that should be a pointer
+to the result buffer of the input string that it's supposed to verify, or
+verification will fail.
+
+UI_add_input_boolean() adds a prompt to the UI that's supposed to be answered
+in a boolean way, with a single character for yes and a different character
+for no.  A set of characters that can be used to cancel the prompt is given
+as well.  The prompt itself is really divided in two, one part being the
+descriptive text (given through the I<prompt> argument) and one describing
+the possible answers (given through the I<action_desc> argument).
+
+UI_add_info_string() and UI_add_error_string() add strings that are shown at
+the same time as the prompt for extra information or to show an error string.
+The difference between the two is only conceptual.  With the builtin method,
+there's no technical difference between them.  Other methods may make a
+difference between them, however.
+
+The flags currently supported are UI_INPUT_FLAG_ECHO, which is relevant for
+UI_add_input_string() and will have the users response be echoed (when
+prompting for a password, this flag should obviously not be used, and
+UI_INPUT_FLAG_DEFAULT_PWD, which means that a default password of some
+sort will be used (completely depending on the application and the UI
+method).
+
+UI_dup_input_string(), UI_dup_verify_string(), UI_dup_input_boolean(),
+UI_dup_info_string() and UI_dup_error_string() are basically the same
+as their UI_add counterparts, except that they make their own copies
+of all strings.
+
+UI_construct_prompt() is a helper function that can be used to create
+a prompt from two pieces of information: an description and a name.
+The default constructor (if there is none provided by the method used)
+creates a string "Enter I<description> for I<name>:".  With the
+description "pass phrase" and the file name "foo.key", that becomes
+"Enter pass phrase for foo.key:".  Other methods may create whatever
+string and may include encodings that will be processed by the other
+method functions.
+
+UI_add_user_data() adds a piece of memory for the method to use at any
+time.  The builtin UI method doesn't care about this info.  Note that several
+calls to this function doesn't add data, it replaces the previous blob
+with the one given as argument.
+
+UI_get0_user_data() retrieves the data that has last been given to the
+UI with UI_add_user_data().
+
+UI_get0_result() returns a pointer to the result buffer associated with
+the information indexed by I<i>.
+
+UI_process() goes through the information given so far, does all the printing
+and prompting and returns.
+
+UI_ctrl() adds extra control for the application author.  For now, it
+understands two commands: UI_CTRL_PRINT_ERRORS, which makes UI_process()
+print the OpenSSL error stack as part of processing the UI, and
+UI_CTRL_IS_REDOABLE, which returns a flag saying if the used UI can
+be used again or not.
+
+UI_set_default_method() changes the default UI method to the one given.
+
+UI_get_default_method() returns a pointer to the current default UI method.
+
+UI_get_method() returns the UI method associated with a given UI.
+
+UI_set_method() changes the UI method associated with a given UI.
+
+=head1 SEE ALSO
+
+L<ui_create(3)|ui_create(3)>, L<ui_compat(3)|ui_compat(3)>
+
+=head1 HISTORY
+
+The UI section was first introduced in OpenSSL 0.9.7.
+
+=head1 AUTHOR
+
+Richard Levitte (richard@levitte.org) for the OpenSSL project
+(http://www.openssl.org).
+
+=cut

doc/crypto/ui_compat.pod

+=pod
+
+=head1 NAME
+
+des_read_password, des_read_2passwords, des_read_pw_string, des_read_pw -
+Compatibility user interface functions
+
+=head1 SYNOPSIS
+
+ int des_read_password(DES_cblock *key,const char *prompt,int verify);
+ int des_read_2passwords(DES_cblock *key1,DES_cblock *key2,
+ 	const char *prompt,int verify);
+
+ int des_read_pw_string(char *buf,int length,const char *prompt,int verify);
+ int des_read_pw(char *buf,char *buff,int size,const char *prompt,int verify);
+
+=head1 DESCRIPTION
+
+The DES library contained a few routines to prompt for passwords.  These
+aren't necessarely dependent on DES, and have therefore become part of the
+UI compatibility library.
+
+des_read_pw() writes the string specified by I<prompt> to standard output
+turns echo off and reads an input string from the terminal.  The string is
+returned in I<buf>, which must have spac for at least I<size> bytes.
+If I<verify> is set, the user is asked for the password twice and unless
+the two copies match, an error is returned.  The second password is stored
+in I<buff>, which must therefore also be at least I<size> bytes.  A return
+code of -1 indicates a system error, 1 failure due to use interaction, and
+0 is success.  All other functions described here use des_read_pw() to do
+the work.
+
+des_read_pw_string() is a variant of des_read_pw() that provides a buffer
+for you if I<verify> is set.
+
+des_read_password() calls des_read_pw() and converts the password to a
+DES key by calling DES_string_to_key(); des_read_2password() operates in
+the same way as des_read_password() except that it generates two keys
+by using the DES_string_to_2key() function.
+
+=head1 NOTES
+
+des_read_pw_string() is available in the MIT Kerberos library as well, and
+is also available under the name EVP_read_pw_string().
+
+=head1 SEE ALSO
+
+L<ui_create(3)|ui_create(3)>, L<ui_compat(3)|ui_compat(3)>
+
+=head1 AUTHOR
+
+Richard Levitte (richard@levitte.org) for the OpenSSL project
+(http://www.openssl.org).
+
+=cut