提交 ea1d8435 编写于 作者: D Dr. Stephen Henson

PR: 2840

Reported by: David McCullough <david_mccullough@mcafee.com>

Restore fips configuration module from 0.9.8.
上级 dd251659
......@@ -76,5 +76,6 @@ void OPENSSL_load_builtin_modules(void)
#ifndef OPENSSL_NO_ENGINE
ENGINE_add_conf_module();
#endif
EVP_add_alg_module();
}
......@@ -18,7 +18,7 @@ TESTDATA=evptests.txt
APPS=
LIB=$(TOP)/libcrypto.a
LIBSRC= encode.c digest.c evp_enc.c evp_key.c evp_acnf.c \
LIBSRC= encode.c digest.c evp_enc.c evp_key.c evp_acnf.c evp_cnf.c \
e_des.c e_bf.c e_idea.c e_des3.c e_camellia.c\
e_rc4.c e_aes.c names.c e_seed.c \
e_xcbc_d.c e_rc2.c e_cast.c e_rc5.c \
......@@ -31,7 +31,7 @@ LIBSRC= encode.c digest.c evp_enc.c evp_key.c evp_acnf.c \
e_old.c pmeth_lib.c pmeth_fn.c pmeth_gn.c m_sigver.c \
e_aes_cbc_hmac_sha1.c e_rc4_hmac_md5.c
LIBOBJ= encode.o digest.o evp_enc.o evp_key.o evp_acnf.o \
LIBOBJ= encode.o digest.o evp_enc.o evp_key.o evp_acnf.o evp_cnf.o \
e_des.o e_bf.o e_idea.o e_des3.o e_camellia.o\
e_rc4.o e_aes.o names.o e_seed.o \
e_xcbc_d.o e_rc2.o e_cast.o e_rc5.o \
......
......@@ -1271,6 +1271,8 @@ void EVP_PKEY_meth_set_ctrl(EVP_PKEY_METHOD *pmeth,
int (*ctrl_str)(EVP_PKEY_CTX *ctx,
const char *type, const char *value));
void EVP_add_alg_module(void);
/* BEGIN ERROR CODES */
/* The following lines are auto generated by the script mkerr.pl. Any changes
* made after this point may be overwritten when the script is next run.
......@@ -1285,6 +1287,7 @@ void ERR_load_EVP_strings(void);
#define EVP_F_AES_INIT_KEY 133
#define EVP_F_AES_XTS 172
#define EVP_F_AES_XTS_CIPHER 175
#define EVP_F_ALG_MODULE_INIT 177
#define EVP_F_CAMELLIA_INIT_KEY 159
#define EVP_F_CMAC_INIT 173
#define EVP_F_D2I_PKEY 100
......@@ -1378,15 +1381,19 @@ void ERR_load_EVP_strings(void);
#define EVP_R_DIFFERENT_PARAMETERS 153
#define EVP_R_DISABLED_FOR_FIPS 163
#define EVP_R_ENCODE_ERROR 115
#define EVP_R_ERROR_LOADING_SECTION 165
#define EVP_R_ERROR_SETTING_FIPS_MODE 166
#define EVP_R_EVP_PBE_CIPHERINIT_ERROR 119
#define EVP_R_EXPECTING_AN_RSA_KEY 127
#define EVP_R_EXPECTING_A_DH_KEY 128
#define EVP_R_EXPECTING_A_DSA_KEY 129
#define EVP_R_EXPECTING_A_ECDSA_KEY 141
#define EVP_R_EXPECTING_A_EC_KEY 142
#define EVP_R_FIPS_MODE_NOT_SUPPORTED 167
#define EVP_R_INITIALIZATION_ERROR 134
#define EVP_R_INPUT_NOT_INITIALIZED 111
#define EVP_R_INVALID_DIGEST 152
#define EVP_R_INVALID_FIPS_MODE 168
#define EVP_R_INVALID_KEY_LENGTH 130
#define EVP_R_INVALID_OPERATION 148
#define EVP_R_IV_TOO_LARGE 102
......@@ -1411,6 +1418,7 @@ void ERR_load_EVP_strings(void);
#define EVP_R_TOO_LARGE 164
#define EVP_R_UNKNOWN_CIPHER 160
#define EVP_R_UNKNOWN_DIGEST 161
#define EVP_R_UNKNOWN_OPTION 169
#define EVP_R_UNKNOWN_PBE_ALGORITHM 121
#define EVP_R_UNSUPORTED_NUMBER_OF_ROUNDS 135
#define EVP_R_UNSUPPORTED_ALGORITHM 156
......
......@@ -75,7 +75,9 @@ static ERR_STRING_DATA EVP_str_functs[]=
{ERR_FUNC(EVP_F_AES_INIT_KEY), "AES_INIT_KEY"},
{ERR_FUNC(EVP_F_AES_XTS), "AES_XTS"},
{ERR_FUNC(EVP_F_AES_XTS_CIPHER), "AES_XTS_CIPHER"},
{ERR_FUNC(EVP_F_ALG_MODULE_INIT), "ALG_MODULE_INIT"},
{ERR_FUNC(EVP_F_CAMELLIA_INIT_KEY), "CAMELLIA_INIT_KEY"},
{ERR_FUNC(EVP_F_CMAC_INIT), "CMAC_INIT"},
{ERR_FUNC(EVP_F_D2I_PKEY), "D2I_PKEY"},
{ERR_FUNC(EVP_F_DO_SIGVER_INIT), "DO_SIGVER_INIT"},
{ERR_FUNC(EVP_F_DSAPKEY2PKCS8), "DSAPKEY2PKCS8"},
......@@ -136,6 +138,7 @@ static ERR_STRING_DATA EVP_str_functs[]=
{ERR_FUNC(EVP_F_FIPS_CIPHER_CTX_SET_KEY_LENGTH), "FIPS_CIPHER_CTX_SET_KEY_LENGTH"},
{ERR_FUNC(EVP_F_FIPS_DIGESTINIT), "FIPS_digestinit"},
{ERR_FUNC(EVP_F_FIPS_MD_CTX_COPY), "FIPS_MD_CTX_COPY"},
{ERR_FUNC(EVP_F_HMAC_INIT_EX), "HMAC_Init_ex"},
{ERR_FUNC(EVP_F_INT_CTX_NEW), "INT_CTX_NEW"},
{ERR_FUNC(EVP_F_PKCS5_PBE_KEYIVGEN), "PKCS5_PBE_keyivgen"},
{ERR_FUNC(EVP_F_PKCS5_V2_PBE_KEYIVGEN), "PKCS5_v2_PBE_keyivgen"},
......@@ -169,15 +172,19 @@ static ERR_STRING_DATA EVP_str_reasons[]=
{ERR_REASON(EVP_R_DIFFERENT_PARAMETERS) ,"different parameters"},
{ERR_REASON(EVP_R_DISABLED_FOR_FIPS) ,"disabled for fips"},
{ERR_REASON(EVP_R_ENCODE_ERROR) ,"encode error"},
{ERR_REASON(EVP_R_ERROR_LOADING_SECTION) ,"error loading section"},
{ERR_REASON(EVP_R_ERROR_SETTING_FIPS_MODE),"error setting fips mode"},
{ERR_REASON(EVP_R_EVP_PBE_CIPHERINIT_ERROR),"evp pbe cipherinit error"},
{ERR_REASON(EVP_R_EXPECTING_AN_RSA_KEY) ,"expecting an rsa key"},
{ERR_REASON(EVP_R_EXPECTING_A_DH_KEY) ,"expecting a dh key"},
{ERR_REASON(EVP_R_EXPECTING_A_DSA_KEY) ,"expecting a dsa key"},
{ERR_REASON(EVP_R_EXPECTING_A_ECDSA_KEY) ,"expecting a ecdsa key"},
{ERR_REASON(EVP_R_EXPECTING_A_EC_KEY) ,"expecting a ec key"},
{ERR_REASON(EVP_R_FIPS_MODE_NOT_SUPPORTED),"fips mode not supported"},
{ERR_REASON(EVP_R_INITIALIZATION_ERROR) ,"initialization error"},
{ERR_REASON(EVP_R_INPUT_NOT_INITIALIZED) ,"input not initialized"},
{ERR_REASON(EVP_R_INVALID_DIGEST) ,"invalid digest"},
{ERR_REASON(EVP_R_INVALID_FIPS_MODE) ,"invalid fips mode"},
{ERR_REASON(EVP_R_INVALID_KEY_LENGTH) ,"invalid key length"},
{ERR_REASON(EVP_R_INVALID_OPERATION) ,"invalid operation"},
{ERR_REASON(EVP_R_IV_TOO_LARGE) ,"iv too large"},
......@@ -202,6 +209,7 @@ static ERR_STRING_DATA EVP_str_reasons[]=
{ERR_REASON(EVP_R_TOO_LARGE) ,"too large"},
{ERR_REASON(EVP_R_UNKNOWN_CIPHER) ,"unknown cipher"},
{ERR_REASON(EVP_R_UNKNOWN_DIGEST) ,"unknown digest"},
{ERR_REASON(EVP_R_UNKNOWN_OPTION) ,"unknown option"},
{ERR_REASON(EVP_R_UNKNOWN_PBE_ALGORITHM) ,"unknown pbe algorithm"},
{ERR_REASON(EVP_R_UNSUPORTED_NUMBER_OF_ROUNDS),"unsuported number of rounds"},
{ERR_REASON(EVP_R_UNSUPPORTED_ALGORITHM) ,"unsupported algorithm"},
......
......@@ -3687,7 +3687,7 @@ FIPS_dh_new 4073 EXIST:OPENSSL_FIPS:FUNCTION:DH
FIPS_corrupt_dsa_keygen 4074 NOEXIST::FUNCTION:
FIPS_dh_free 4075 EXIST:OPENSSL_FIPS:FUNCTION:DH
fips_pkey_signature_test 4076 EXIST:OPENSSL_FIPS:FUNCTION:
EVP_add_alg_module 4077 NOEXIST::FUNCTION:
EVP_add_alg_module 4077 EXIST::FUNCTION:
int_RAND_init_engine_callbacks 4078 NOEXIST::FUNCTION:
int_EVP_CIPHER_set_engine_callbacks 4079 NOEXIST::FUNCTION:
int_EVP_MD_init_engine_callbacks 4080 NOEXIST::FUNCTION:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册