Fix warnings.

Also, use the common Configure mechanism for enabling/disabling the 64-bit ECC code.

CHANGES

@@ -235,11 +235,12 @@
   *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
      NIST-P256, NIST-P521, with constant-time single point multiplication on
      typical inputs. Compiler support for the nonstandard type __uint128_t is
-     required to use this. Code made available under Apache License version 2.0.
+     required to use this (present in gcc 4.4 and later, for 64-bit builds).
+     Code made available under Apache License version 2.0.
 
-     To include this in your build of OpenSSL, use -DEC_NISTP_64_GCC_128 on
-     the Configure (or config) command line, and run "make depend" (or "make
-     update"). This enables the following EC_METHODs:
+     Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
+     line to include this in your build of OpenSSL, and run "make depend" (or
+     "make update"). This enables the following EC_METHODs:
 
          EC_GFp_nistp224_method()
          EC_GFp_nistp256_method()

Configure

@@ -173,7 +173,7 @@ my %table=(
 "debug-ben-no-opt",	"gcc: -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG -Werror -DL_ENDIAN -DTERMIOS -Wall -g3::(unknown)::::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -march=i486 -pedantic -Wshadow -Wall -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-bodo",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DBN_DEBUG_RAND -DCONF_DEBUG -DBIO_PAIR_DEBUG -m64 -DL_ENDIAN -DTERMIO -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32:::${no_asm}:win32:cygwin-shared:::.dll",
 "debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-steve32", "gcc:$gcc_devteam_warn -m32 -DL_ENDIAN -DCONF_DEBUG -DDEBUG_SAFESTACK -g -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -701,7 +701,7 @@ my $fips=0;
 # All of the following is disabled by default (RC5 was enabled before 0.9.8):
 
 my %disabled = ( # "what"         => "comment" [or special keyword "experimental"]
-		 "ec-nistp224-64-gcc-128" => "default",
+      		 "ec_nistp_64_gcc_128" => "default",
 		 "gmp"		  => "default",
                  "jpake"          => "experimental",
                  "md2"            => "default",
@@ -731,7 +731,7 @@ if (!-d "ssl")
 
 # This is what $depflags will look like with the above defaults
 # (we need this to see if we should advise the user to run "make depend"):
-my $default_depflags = " -DOPENSSL_NO_EC_NISTP224_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE";
+my $default_depflags = " -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE";
 
 # Explicit "no-..." options will be collected in %disabled along with the defaults.
 # To remove something from %disabled, use "enable-foo" (unless it's experimental).

TABLE

@@ -1883,36 +1883,36 @@ $multilib     =
 
 *** debug-bodo
 $cc           = gcc
-$cflags       = -DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -march=i486 -pedantic -Wshadow -Wall -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion
+$cflags       = -Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Werror -DCRYPTO_MDEBUG_ALL -DCRYPTO_MDEBUG_ABORT -DREF_CHECK -DOPENSSL_NO_DEPRECATED -DBN_DEBUG -DBN_DEBUG_RAND -DCONF_DEBUG -DBIO_PAIR_DEBUG -m64 -DL_ENDIAN -DTERMIO -g -DMD32_REG_T=int
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
-$lflags       = 
-$bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
-$cpuid_obj    = x86cpuid.o
-$bn_obj       = bn-586.o co-586.o x86-mont.o x86-gf2m.o
-$des_obj      = des-586.o crypt586.o
-$aes_obj      = aes-586.o vpaes-x86.o aesni-x86.o
-$bf_obj       = bf-586.o
-$md5_obj      = md5-586.o
-$sha1_obj     = sha1-586.o sha256-586.o sha512-586.o
-$cast_obj     = cast-586.o
-$rc4_obj      = rc4-586.o
-$rmd160_obj   = rmd-586.o
-$rc5_obj      = rc5-586.o
-$wp_obj       = wp_block.o wp-mmx.o
-$cmll_obj     = cmll-x86.o
-$modes_obj    = ghash-x86.o
-$engines_obj  = e_padlock-x86.o
+$lflags       = -ldl
+$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL
+$cpuid_obj    = x86_64cpuid.o
+$bn_obj       = x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o modexp512-x86_64.o
+$des_obj      = 
+$aes_obj      = aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o
+$bf_obj       = 
+$md5_obj      = md5-x86_64.o
+$sha1_obj     = sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
+$cast_obj     = 
+$rc4_obj      = rc4-x86_64.o rc4-md5-x86_64.o
+$rmd160_obj   = 
+$rc5_obj      = 
+$wp_obj       = wp-x86_64.o
+$cmll_obj     = cmll-x86_64.o cmll_misc.o
+$modes_obj    = ghash-x86_64.o
+$engines_obj  = e_padlock-x86_64.o
 $perlasm_scheme = elf
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
+$dso_scheme   = dlfcn
+$shared_target= linux-shared
+$shared_cflag = -fPIC
+$shared_ldflag = -m64
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
-$multilib     = 
+$multilib     = 64
 
 *** debug-darwin-i386-cc
 $cc           = cc
@@ -5841,6 +5841,39 @@ $ranlib       =
 $arflags      = 
 $multilib     = 
 
+*** vxworks-mips
+$cc           = ccmips
+$cflags       = -B$(WIND_BASE)/host/$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE="$(WIND_BASE)/target/lib/h/config/vsbConfig.h" -DB_ENDIAN -DCPU=MIPS32 -G 0 -mips2 -EB -Wl,-EB -msoft-float -mno-branch-likely -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip
+$unistd       = 
+$thread_cflag = 
+$sys_id       = VXWORKS
+$lflags       = -r
+$bn_ops       = 
+$cpuid_obj    = 
+$bn_obj       = 
+$des_obj      = 
+$aes_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$wp_obj       = 
+$cmll_obj     = 
+$modes_obj    = 
+$engines_obj  = 
+$perlasm_scheme = void
+$dso_scheme   = 
+$shared_target= 
+$shared_cflag = 
+$shared_ldflag = 
+$shared_extension = 
+$ranlib       = ranlibmips
+$arflags      = 
+$multilib     = 
+
 *** vxworks-mipsle
 $cc           = ccmips
 $cflags       = -B$(WIND_BASE)/host/$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I$(WIND_BASE)/target/h
@@ -6071,3 +6104,36 @@ $shared_extension =
 $ranlib       = 
 $arflags      = 
 $multilib     = 
+
+*** vxworks-simlinux
+$cc           = ccpentium
+$cflags       = -B$(WIND_BASE)/host/$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE="$(WIND_BASE)/target/lib/h/config/vsbConfig.h" -DL_ENDIAN -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip -DOPENSSL_NO_HW_PADLOCK
+$unistd       = 
+$thread_cflag = 
+$sys_id       = VXWORKS
+$lflags       = -r
+$bn_ops       = 
+$cpuid_obj    = 
+$bn_obj       = 
+$des_obj      = 
+$aes_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$wp_obj       = 
+$cmll_obj     = 
+$modes_obj    = 
+$engines_obj  = 
+$perlasm_scheme = void
+$dso_scheme   = 
+$shared_target= 
+$shared_cflag = 
+$shared_ldflag = 
+$shared_extension = 
+$ranlib       = ranlibpentium
+$arflags      = 
+$multilib     = 

crypto/ec/ec.h

@@ -151,7 +151,7 @@ const EC_METHOD *EC_GFp_mont_method(void);
  */
 const EC_METHOD *EC_GFp_nist_method(void);
 
-#ifdef EC_NISTP_64_GCC_128
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 #ifndef OPENSSL_SYS_WIN32
 /** Returns 64-bit optimized methods for nistp224
  *  \return  EC_METHOD object

crypto/ec/ec_curve.c

@@ -74,6 +74,7 @@
 #include "ec_lcl.h"
 #include <openssl/err.h>
 #include <openssl/obj_mac.h>
+#include <openssl/opensslconf.h>
 
 typedef struct {
 	int	field_type,	/* either NID_X9_62_prime_field or
@@ -1903,7 +1904,7 @@ static const ec_list_element curve_list[] = {
 	/* SECG secp192r1 is the same as X9.62 prime192v1 and hence omitted */
 	{ NID_secp192k1, &_EC_SECG_PRIME_192K1.h, 0, "SECG curve over a 192 bit prime field" },
 	{ NID_secp224k1, &_EC_SECG_PRIME_224K1.h, 0, "SECG curve over a 224 bit prime field" },
-#ifdef EC_NISTP_64_GCC_128
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 	{ NID_secp224r1, &_EC_NIST_PRIME_224.h, EC_GFp_nistp224_method, "NIST/SECG curve over a 224 bit prime field" },
 #else
 	{ NID_secp224r1, &_EC_NIST_PRIME_224.h, 0, "NIST/SECG curve over a 224 bit prime field" },
@@ -1911,7 +1912,7 @@ static const ec_list_element curve_list[] = {
 	{ NID_secp256k1, &_EC_SECG_PRIME_256K1.h, 0, "SECG curve over a 256 bit prime field" },
 	/* SECG secp256r1 is the same as X9.62 prime256v1 and hence omitted */
 	{ NID_secp384r1, &_EC_NIST_PRIME_384.h, 0, "NIST/SECG curve over a 384 bit prime field" },
-#ifdef EC_NISTP_64_GCC_128
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 	{ NID_secp521r1, &_EC_NIST_PRIME_521.h, EC_GFp_nistp521_method, "NIST/SECG curve over a 521 bit prime field" },
 #else
 	{ NID_secp521r1, &_EC_NIST_PRIME_521.h, 0, "NIST/SECG curve over a 521 bit prime field" },
@@ -1923,7 +1924,7 @@ static const ec_list_element curve_list[] = {
 	{ NID_X9_62_prime239v1, &_EC_X9_62_PRIME_239V1.h, 0, "X9.62 curve over a 239 bit prime field" },
 	{ NID_X9_62_prime239v2, &_EC_X9_62_PRIME_239V2.h, 0, "X9.62 curve over a 239 bit prime field" },
 	{ NID_X9_62_prime239v3, &_EC_X9_62_PRIME_239V3.h, 0, "X9.62 curve over a 239 bit prime field" },
-#ifdef EC_NISTP_64_GCC_128
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 	{ NID_X9_62_prime256v1, &_EC_X9_62_PRIME_256V1.h, EC_GFp_nistp256_method, "X9.62/SECG curve over a 256 bit prime field" },
 #else
 	{ NID_X9_62_prime256v1, &_EC_X9_62_PRIME_256V1.h, 0, "X9.62/SECG curve over a 256 bit prime field" },

crypto/ec/ec_lcl.h

@@ -398,13 +398,13 @@ int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 int ec_GF2m_precompute_mult(EC_GROUP *group, BN_CTX *ctx);
 int ec_GF2m_have_precompute_mult(const EC_GROUP *group);
 
-#ifdef EC_NISTP_64_GCC_128
 /* method functions in ec2_mult.c */
 int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 	size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *);
 int ec_GF2m_precompute_mult(EC_GROUP *group, BN_CTX *ctx);
 int ec_GF2m_have_precompute_mult(const EC_GROUP *group);
 
+#ifndef OPENSSL_EC_NISTP_64_GCC_128
 /* method functions in ecp_nistp224.c */
 int ec_GFp_nistp224_group_init(EC_GROUP *group);
 int ec_GFp_nistp224_group_set_curve(EC_GROUP *group, const BIGNUM *p, const BIGNUM *a, const BIGNUM *n, BN_CTX *);

crypto/ec/ecp_nistp224.c

@@ -24,7 +24,10 @@
  * Inspired by Daniel J. Bernstein's public domain nistp224 implementation
  * and Adam Langley's public domain 64-bit C implementation of curve25519
  */
-#ifdef EC_NISTP_64_GCC_128
+
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
+
 #include <stdint.h>
 #include <string.h>
 #include <openssl/err.h>
@@ -247,9 +250,9 @@ const EC_METHOD *EC_GFp_nistp224_method(void)
 		ec_GFp_simple_get_Jprojective_coordinates_GFp,
 		ec_GFp_simple_point_set_affine_coordinates,
 		ec_GFp_nistp224_point_get_affine_coordinates,
-                0 /* point_set_compressed_coordinates */,
-                0 /* point2oct */,
-                0 /* oct2point */,
+		0 /* point_set_compressed_coordinates */,
+		0 /* point2oct */,
+		0 /* oct2point */,
 		ec_GFp_simple_add,
 		ec_GFp_simple_dbl,
 		ec_GFp_simple_invert,
@@ -1000,9 +1003,9 @@ static void point_add(felem x3, felem y3, felem z3,
 	felem_assign(z3, z_out);
 	}
 
-/* select_point selects the |index|th point from a precomputation table and
+/* select_point selects the |idx|th point from a precomputation table and
  * copies it to out. */
-static void select_point(const u64 index, unsigned int size, const felem pre_comp[/*size*/][3], felem out[3])
+static void select_point(const u64 idx, unsigned int size, const felem pre_comp[/*size*/][3], felem out[3])
 	{
 	unsigned i, j;
 	limb *outlimbs = &out[0][0];
@@ -1011,7 +1014,7 @@ static void select_point(const u64 index, unsigned int size, const felem pre_com
 	for (i = 0; i < size; i++)
 		{
 		const limb *inlimbs = &pre_comp[i][0][0];
-		u64 mask = i ^ index;
+		u64 mask = i ^ idx;
 		mask |= mask >> 4;
 		mask |= mask >> 2;
 		mask |= mask >> 1;

crypto/ec/ecp_nistp256.c

@@ -26,7 +26,8 @@
  * work which got its smarts from Daniel J. Bernstein's work on the same.
  */
 
-#ifdef EC_NISTP_64_GCC_128
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 
 #include <stdint.h>
 #include <string.h>
@@ -363,6 +364,10 @@ static const felem zero110 = { two64m0, two110p32m0, two64m46, two64m32 };
 static void felem_shrink(smallfelem out, const felem in)
 	{
 	felem tmp;
+	u64 a, b, mask;
+	s64 high, low;
+	static const u64 kPrime3Test = 0x7fffffff00000001ul; /* 2^63 - 2^32 + 1 */
+
 	/* Carry 2->3 */
 	tmp[3] = zero110[3] + in[3] + ((u64) (in[2] >> 64));
 	/* tmp[3] < 2^110 */
@@ -375,13 +380,13 @@ static void felem_shrink(smallfelem out, const felem in)
 	/* We perform two partial reductions where we eliminate the
 	 * high-word of tmp[3]. We don't update the other words till the end.
 	 */
-	u64 a = tmp[3] >> 64; /* a < 2^46 */
+	a = tmp[3] >> 64; /* a < 2^46 */
 	tmp[3] = (u64) tmp[3];
 	tmp[3] -= a;
 	tmp[3] += ((limb)a) << 32;
 	/* tmp[3] < 2^79 */
 
-	u64 b = a;
+	b = a;
 	a = tmp[3] >> 64; /* a < 2^15 */
 	b += a; /* b < 2^46 + 2^15 < 2^47 */
 	tmp[3] = (u64) tmp[3];
@@ -396,16 +401,15 @@ static void felem_shrink(smallfelem out, const felem in)
 
 	/* In order to make space in tmp[3] for the carry from 2 -> 3, we
 	 * conditionally subtract kPrime if tmp[3] is large enough. */
-	static const u64 kPrime3Test = 0x7fffffff00000001ul; /* 2^63 - 2^32 + 1 */
-	s64 high = tmp[3] >> 64;
+	high = tmp[3] >> 64;
 	/* As tmp[3] < 2^65, high is either 1 or 0 */
 	high <<= 63;
 	high >>= 63;
 	/* high is:
 	 *   all ones   if the high word of tmp[3] is 1
 	 *   all zeros  if the high word of tmp[3] if 0 */
-	s64 low = tmp[3];
-	u64 mask = low >> 63;
+	low = tmp[3];
+	mask = low >> 63;
 	/* mask is:
 	 *   all ones   if the MSB of low is 1
 	 *   all zeros  if the MSB of low if 0 */
@@ -815,7 +819,9 @@ static void felem_contract(smallfelem out, const felem in)
 	 * compare each u64, from most-significant to least significant. For
 	 * each one, if all words so far have been equal (m is all ones) then a
 	 * non-equal result is the answer. Otherwise we continue. */
-	for (i = 3; i < 4; i--) {
+	for (i = 3; i < 4; i--)
+		{
+		u64 equal;
 		uint128_t a = ((uint128_t) kPrime[i]) - out[i];
 		/* if out[i] > kPrime[i] then a will underflow and the high
 		 * 64-bits will all be set. */
@@ -823,7 +829,7 @@ static void felem_contract(smallfelem out, const felem in)
 
 		/* if kPrime[i] == out[i] then |equal| will be all zeros and
 		 * the decrement will make it all ones. */
-		u64 equal = kPrime[i] ^ out[i];
+		equal = kPrime[i] ^ out[i];
 		equal--;
 		equal &= equal << 32;
 		equal &= equal << 16;
@@ -834,7 +840,7 @@ static void felem_contract(smallfelem out, const felem in)
 		equal = ((s64) equal) >> 63;
 
 		all_equal_so_far &= equal;
-	}
+		}
 
 	/* if all_equal_so_far is still all ones then the two values are equal
 	 * and so out >= kPrime is true. */
@@ -884,6 +890,7 @@ static void smallfelem_mul_contract(smallfelem out, const smallfelem in1, const
 static limb smallfelem_is_zero(const smallfelem small)
 	{
 	limb result;
+	u64 is_p;
 
 	u64 is_zero = small[0] | small[1] | small[2] | small[3];
 	is_zero--;
@@ -895,10 +902,10 @@ static limb smallfelem_is_zero(const smallfelem small)
 	is_zero &= is_zero << 1;
 	is_zero = ((s64) is_zero) >> 63;
 
-	u64 is_p = (small[0] ^ kPrime[0]) |
-		   (small[1] ^ kPrime[1]) |
-		   (small[2] ^ kPrime[2]) |
-		   (small[3] ^ kPrime[3]);
+	is_p = (small[0] ^ kPrime[0]) |
+	       (small[1] ^ kPrime[1]) |
+	       (small[2] ^ kPrime[2]) |
+	       (small[3] ^ kPrime[3]);
 	is_p--;
 	is_p &= is_p << 32;
 	is_p &= is_p << 16;
@@ -1457,9 +1464,9 @@ static const smallfelem gmul[2][16][3] =
    {0x501e82885bc98cda, 0x41ef80e5d046ac04, 0x557d9f49461210fb, 0x4ab5b6b2b8753f81},
    {1, 0, 0, 0}}}};
 
-/* select_point selects the |index|th point from a precomputation table and
+/* select_point selects the |idx|th point from a precomputation table and
  * copies it to out. */
-static void select_point(const u64 index, unsigned int size, const smallfelem pre_comp[16][3], smallfelem out[3])
+static void select_point(const u64 idx, unsigned int size, const smallfelem pre_comp[16][3], smallfelem out[3])
 	{
 	unsigned i, j;
 	u64 *outlimbs = &out[0][0];
@@ -1468,7 +1475,7 @@ static void select_point(const u64 index, unsigned int size, const smallfelem pr
 	for (i = 0; i < size; i++)
 		{
 		const u64 *inlimbs = (u64*) &pre_comp[i][0][0];
-		u64 mask = i ^ index;
+		u64 mask = i ^ idx;
 		mask |= mask >> 4;
 		mask |= mask >> 2;
 		mask |= mask >> 1;
@@ -1623,9 +1630,9 @@ const EC_METHOD *EC_GFp_nistp256_method(void)
 		ec_GFp_simple_get_Jprojective_coordinates_GFp,
 		ec_GFp_simple_point_set_affine_coordinates,
 		ec_GFp_nistp256_point_get_affine_coordinates,
-                0 /* point_set_compressed_coordinates */,
-                0 /* point2oct */,
-                0 /* oct2point */,
+		0 /* point_set_compressed_coordinates */,
+		0 /* point2oct */,
+		0 /* oct2point */,
 		ec_GFp_simple_add,
 		ec_GFp_simple_dbl,
 		ec_GFp_simple_invert,
@@ -1784,16 +1791,17 @@ int ec_GFp_nistp256_point_get_affine_coordinates(const EC_GROUP *group,
 	felem_contract(y_out, y_in);
 	if (y != NULL)
 		{
-		if (!smallfelem_to_BN(y, y_out)) {
-		ECerr(EC_F_EC_GFP_NISTP256_POINT_GET_AFFINE_COORDINATES,
-			ERR_R_BN_LIB);
-		return 0;
-		}
+		if (!smallfelem_to_BN(y, y_out))
+			{
+			ECerr(EC_F_EC_GFP_NISTP256_POINT_GET_AFFINE_COORDINATES,
+				ERR_R_BN_LIB);
+			return 0;
+			}
 		}
 	return 1;
 	}
 
-static void make_points_affine(size_t num, smallfelem points[num][3], smallfelem tmp_smallfelems[num+1])
+static void make_points_affine(size_t num, smallfelem points[/* num */][3], smallfelem tmp_smallfelems[/* num+1 */])
 	{
 	/* Runs in constant time, unless an input is the point at infinity
 	 * (which normally shouldn't happen). */

crypto/ec/ecp_nistp521.c

@@ -26,7 +26,8 @@
  * work which got its smarts from Daniel J. Bernstein's work on the same.
  */
 
-#ifdef EC_NISTP_64_GCC_128
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 
 #include <stdint.h>
 #include <string.h>
@@ -339,7 +340,7 @@ static void felem_diff64(felem out, const felem in)
  */
 static void felem_diff_128_64(largefelem out, const felem in)
 	{
-	// In order to prevent underflow, we add 0 mod p before subtracting.
+	/* In order to prevent underflow, we add 0 mod p before subtracting. */
 	static const limb two63m6 = (((limb)1) << 62) - (((limb)1) << 5);
 	static const limb two63m5 = (((limb)1) << 62) - (((limb)1) << 4);
 
@@ -362,7 +363,7 @@ static void felem_diff_128_64(largefelem out, const felem in)
  */
 static void felem_diff128(largefelem out, const largefelem in)
 	{
-	// In order to prevent underflow, we add 0 mod p before subtracting.
+	/* In order to prevent underflow, we add 0 mod p before subtracting. */
 	static const uint128_t two127m70 = (((uint128_t)1) << 127) - (((uint128_t)1) << 70);
 	static const uint128_t two127m69 = (((uint128_t)1) << 127) - (((uint128_t)1) << 69);
 
@@ -431,40 +432,40 @@ static void felem_square(largefelem out, const felem in)
 	 * the inputs to the multiplication. If we want to double for both this
 	 * reason, and the reason above, then we end up multiplying by four. */
 
-	// 9
+	/* 9 */
 	out[0] += ((uint128_t) in[1]) * inx4[8] +
 		  ((uint128_t) in[2]) * inx4[7] +
 		  ((uint128_t) in[3]) * inx4[6] +
 		  ((uint128_t) in[4]) * inx4[5];
 
-	// 10
+	/* 10 */
 	out[1] += ((uint128_t) in[2]) * inx4[8] +
 		  ((uint128_t) in[3]) * inx4[7] +
 		  ((uint128_t) in[4]) * inx4[6] +
 		  ((uint128_t) in[5]) * inx2[5];
 
-	// 11
+	/* 11 */
 	out[2] += ((uint128_t) in[3]) * inx4[8] +
 		  ((uint128_t) in[4]) * inx4[7] +
 		  ((uint128_t) in[5]) * inx4[6];
 
-	// 12
+	/* 12 */
 	out[3] += ((uint128_t) in[4]) * inx4[8] +
 		  ((uint128_t) in[5]) * inx4[7] +
 		  ((uint128_t) in[6]) * inx2[6];
 
-	// 13
+	/* 13 */
 	out[4] += ((uint128_t) in[5]) * inx4[8] +
 		  ((uint128_t) in[6]) * inx4[7];
 
-	// 14
+	/* 14 */
 	out[5] += ((uint128_t) in[6]) * inx4[8] +
 		  ((uint128_t) in[7]) * inx2[7];
 
-	// 15
+	/* 15 */
 	out[6] += ((uint128_t) in[7]) * inx4[8];
 
-	// 16
+	/* 16 */
 	out[7] += ((uint128_t) in[8]) * inx2[8];
 	}
 
@@ -591,6 +592,8 @@ static const limb bottom52bits = 0xfffffffffffff;
  */
 static void felem_reduce(felem out, const largefelem in)
 	{
+	u64 overflow1, overflow2;
+
 	out[0] = ((limb) in[0]) & bottom58bits;
 	out[1] = ((limb) in[1]) & bottom58bits;
 	out[2] = ((limb) in[2]) & bottom58bits;
@@ -637,11 +640,11 @@ static void felem_reduce(felem out, const largefelem in)
 	out[8] += (((limb) (in[7] >> 64)) & bottom52bits) << 6;
 	/* out[x > 1] < 2^58 + 2^6 + 2^58 + 2^12
 	 *            < 2^59 + 2^13 */
-	u64 overflow1 = ((limb) (in[7] >> 64)) >> 52;
+	overflow1 = ((limb) (in[7] >> 64)) >> 52;
 
 	overflow1 += ((limb) in[8]) >> 58;
 	overflow1 += (((limb) (in[8] >> 64)) & bottom52bits) << 6;
-	u64 overflow2 = ((limb) (in[8] >> 64)) >> 52;
+	overflow2 = ((limb) (in[8] >> 64)) >> 52;
 
 	overflow1 <<= 1;  /* overflow1 < 2^13 + 2^7 + 2^59 */
 	overflow2 <<= 1;  /* overflow2 < 2^13 */
@@ -800,8 +803,8 @@ static limb felem_is_zero(const felem in)
 	is_zero |= ftmp[8];
 
 	is_zero--;
-	// We know that ftmp[i] < 2^63, therefore the only way that the top bit
-	// can be set is if is_zero was 0 before the decrement.
+	/* We know that ftmp[i] < 2^63, therefore the only way that the top bit
+	 * can be set is if is_zero was 0 before the decrement. */
 	is_zero = ((s64) is_zero) >> 63;
 
 	is_p = ftmp[0] ^ kPrime[0];
@@ -1341,9 +1344,9 @@ static const felem gmul[16][3] =
 	   0x0154536a0c6e966a, 0x037964d1286ee9fe, 0x0199bcd90e125055},
 	 {1, 0, 0, 0, 0, 0, 0, 0, 0}}};
 
-/* select_point selects the |index|th point from a precomputation table and
+/* select_point selects the |idx|th point from a precomputation table and
  * copies it to out. */
-static void select_point(const limb index, unsigned int size, const felem pre_comp[size][3],
+static void select_point(const limb idx, unsigned int size, const felem pre_comp[/* size */][3],
 			 felem out[3])
 	{
 	unsigned i, j;
@@ -1353,7 +1356,7 @@ static void select_point(const limb index, unsigned int size, const felem pre_co
 	for (i = 0; i < size; i++)
 		{
 		const limb *inlimbs = &pre_comp[i][0][0];
-		limb mask = i ^ index;
+		limb mask = i ^ idx;
 		mask |= mask >> 4;
 		mask |= mask >> 2;
 		mask |= mask >> 1;
@@ -1493,9 +1496,9 @@ const EC_METHOD *EC_GFp_nistp521_method(void)
 		ec_GFp_simple_get_Jprojective_coordinates_GFp,
 		ec_GFp_simple_point_set_affine_coordinates,
 		ec_GFp_nistp521_point_get_affine_coordinates,
-                0 /* point_set_compressed_coordinates */,
-                0 /* point2oct */,
-                0 /* oct2point */,
+		0 /* point_set_compressed_coordinates */,
+		0 /* point2oct */,
+		0 /* oct2point */,
 		ec_GFp_simple_add,
 		ec_GFp_simple_dbl,
 		ec_GFp_simple_invert,
@@ -1663,7 +1666,7 @@ int ec_GFp_nistp521_point_get_affine_coordinates(const EC_GROUP *group,
 	return 1;
 	}
 
-static void make_points_affine(size_t num, felem points[num][3], felem tmp_felems[num+1])
+static void make_points_affine(size_t num, felem points[/* num */][3], felem tmp_felems[/* num+1 */])
 	{
 	/* Runs in constant time, unless an input is the point at infinity
 	 * (which normally shouldn't happen). */

crypto/ec/ecp_nistputil.c

@@ -18,7 +18,8 @@
  *  limitations under the License.
  */
 
-#ifdef EC_NISTP_64_GCC_128
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 
 /*
  * Common utility functions for ecp_nistp224.c, ecp_nistp256.c, ecp_nistp521.c.

crypto/ec/ectest.c

@@ -94,6 +94,7 @@ int main(int argc, char * argv[]) { puts("Elliptic curves are disabled."); retur
 #include <openssl/objects.h>
 #include <openssl/rand.h>
 #include <openssl/bn.h>
+#include <openssl/opensslconf.h>
 
 #if defined(_MSC_VER) && defined(_MIPS_) && (_MSC_VER/100==12)
 /* suppress "too big too optimize" warning */
@@ -1270,7 +1271,7 @@ static void internal_curve_test(void)
 	return;
 	}
 
-#ifdef EC_NISTP_64_GCC_128
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 /* nistp_test_params contains magic numbers for testing our optimized
  * implementations of several NIST curves with characteristic > 3. */
 struct nistp_test_params
@@ -1331,16 +1332,18 @@ static const struct nistp_test_params nistp_tests_params[] =
 
 void nistp_single_test(const struct nistp_test_params *test)
 	{
-	fprintf(stdout, "\nNIST curve P-%d (optimised implementation):\n", test->degree);
+	BN_CTX *ctx;
 	BIGNUM *p, *a, *b, *x, *y, *n, *m, *order;
+	EC_GROUP *NISTP;
+	EC_POINT *G, *P, *Q, *Q_CHECK;
+
+	fprintf(stdout, "\nNIST curve P-%d (optimised implementation):\n", test->degree);
+	ctx = BN_CTX_new();
 	p = BN_new();
 	a = BN_new();
 	b = BN_new();
 	x = BN_new(); y = BN_new();
 	m = BN_new(); n = BN_new(); order = BN_new();
-	BN_CTX *ctx = BN_CTX_new();
-	EC_GROUP *NISTP;
-	EC_POINT *G, *P, *Q, *Q_CHECK;
 
 	NISTP = EC_GROUP_new(test->meth());
 	if(!NISTP) ABORT;
@@ -1467,7 +1470,7 @@ int main(int argc, char *argv[])
 #ifndef OPENSSL_NO_EC2M
 	char2_field_tests();
 #endif
-#ifdef EC_NISTP_64_GCC_128
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
 	nistp_tests();
 #endif
 	/* test the internal curves */

util/mkdef.pl

@@ -87,8 +87,8 @@ my @known_algorithms = ( "RC2", "RC4", "RC5", "IDEA", "DES", "BF",
 			 "SHA256", "SHA512", "RIPEMD",
 			 "MDC2", "WHIRLPOOL", "RSA", "DSA", "DH", "EC", "ECDH", "ECDSA", "EC2M",
 			 "HMAC", "AES", "CAMELLIA", "SEED", "GOST",
-			 # ECP_NISTP224
-			 "EC_NISTP224_64_GCC_128",
+			 # EC_NISTP_64_GCC_128
+			 "EC_NISTP_64_GCC_128",
 			 # Envelope "algorithms"
 			 "EVP", "X509", "ASN1_TYPEDEFS",
 			 # Helper "algorithms"
@@ -1189,7 +1189,7 @@ sub is_valid
 			if ($keyword eq "TLSEXT" && $no_tlsext) { return 0; }
 			if ($keyword eq "PSK" && $no_psk) { return 0; }
 			if ($keyword eq "CMS" && $no_cms) { return 0; }
-			if ($keyword eq "EC_NISTP224_64_GCC_128" && $no_nistp_gcc)
+			if ($keyword eq "EC_NISTP_64_GCC_128" && $no_nistp_gcc)
 					{ return 0; }
 			if ($keyword eq "EC2M" && $no_ec2m) { return 0; }
 			if ($keyword eq "NEXTPROTONEG" && $no_nextprotoneg) { return 0; }