Harmonize Unix Makefile template with Windows dito

The variable SHARED_CFLAGS and SHARD_LDFLAGS were used in the Unix
template because they normally contain options used when building
"shared".  The Windows template, on the other hand, uses LIB_CFLAGS,
to express the intended use of those flags rather than their content.
The Windows template still used SHARED_LDFLAGS, which seems
inconsistent.

To harmonize the two, any SHARED_CFLAGS gets renamed to LIB_CFLAGS and
SHARED_LDFLAGS to LIB_LDFLAGS.  That makes the intent consistent along
with BIN_{C,LD}FLAGS and DSO_{C,LD}FLAGS.

Finally, make sure to pass down $(LIB_CFLAGS) or $(DSO_CFLAGS) along
with $(CFLAGS) when using Makefile.shared.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Configurations/unix-Makefile.tmpl

@@ -151,23 +151,24 @@ CFLAGS_Q={- $cflags2 =~ s|([\\"])|\\$1|g; $cflags2 -} {- $config{cflags} -}
 LDFLAGS= {- $target{lflags} -}
 PLIB_LDFLAGS= {- $target{plib_lflags} -}
 EX_LIBS= {- $target{ex_libs} -} {- $config{ex_libs} -}
-SHARED_CFLAGS={- $target{shared_cflag} || "" -}
-SHARED_LDFLAGS={- $target{shared_ldflag}." ".$config{shared_ldflag}
-                  # Unlike other OSes (like Solaris, Linux, Tru64,
-                  # IRIX) BSD run-time linkers (tested OpenBSD, NetBSD
-                  # and FreeBSD) "demand" RPATH set on .so objects.
-                  # Apparently application RPATH is not global and
-                  # does not apply to .so linked with other .so.
-                  # Problem manifests itself when libssl.so fails to
-                  # load libcrypto.so. One can argue that we should
-                  # engrave this into Makefile.shared rules or into
-                  # BSD-* config lines above. Meanwhile let's try to
-                  # be cautious and pass -rpath to linker only when
-                  # $prefix is not /usr.
-                  . ($config{target} =~ m|^BSD-| && $prefix !~ m|^/usr/.*$|
-                     ? " -Wl,-rpath,\$\$(LIBRPATH)" : "") -}
-SHARED_RCFLAGS={- $target{shared_rcflag} -}
+LIB_CFLAGS={- $target{shared_cflag} || "" -}
+LIB_LDFLAGS={- $target{shared_ldflag}." ".$config{shared_ldflag}
+               # Unlike other OSes (like Solaris, Linux, Tru64,
+               # IRIX) BSD run-time linkers (tested OpenBSD, NetBSD
+               # and FreeBSD) "demand" RPATH set on .so objects.
+               # Apparently application RPATH is not global and
+               # does not apply to .so linked with other .so.
+               # Problem manifests itself when libssl.so fails to
+               # load libcrypto.so. One can argue that we should
+               # engrave this into Makefile.shared rules or into
+               # BSD-* config lines above. Meanwhile let's try to
+               # be cautious and pass -rpath to linker only when
+               # $prefix is not /usr.
+               . ($config{target} =~ m|^BSD-| && $prefix !~ m|^/usr/.*$|
+                  ? " -Wl,-rpath,\$\$(LIBRPATH)" : "") -}
+RCFLAGS={- $target{shared_rcflag} -}
 DSO_CFLAGS={- $target{shared_cflag} || "" -}
+DSO_LDFLAGS=$(LIB_LDFLAGS)
 BIN_CFLAGS={- "" -}
 
 PERL={- $config{perl} -}
@@ -878,7 +879,7 @@ EOF
       my $srcs = join(" ",  @srcs);
       my $deps = join(" ", @srcs, @{$args{deps}});
       my $incs = join("", map { " -I".$_ } @{$args{incs}});
-      my $ecflags = { lib => '$(SHARED_CFLAGS)',
+      my $ecflags = { lib => '$(LIB_CFLAGS)',
                       dso => '$(DSO_CFLAGS)',
                       bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
       my $makedepprog = $config{makedepprog};
@@ -954,10 +955,10 @@ $target: $lib$libext $deps $ordinalsfile
 		LIBDEPS="\$(PLIB_LDFLAGS) $linklibs \$(EX_LIBS)" \\
 		LIBNAME=$libname LIBVERSION=\$(SHLIB_MAJOR).\$(SHLIB_MINOR) \\
 		LIBCOMPATVERSIONS=";\$(SHLIB_VERSION_HISTORY)" \\
-		CC="\$(CC)" CFLAGS="\$(CFLAGS)" LDFLAGS="\$(LDFLAGS)" \\
-		CROSS_COMPILE="\$(CROSS_COMPILE)" \\
-		SHARED_LDFLAGS="\$(SHARED_LDFLAGS)" SHLIB_EXT=$shlibext \\
-		SHARED_RCFLAGS="\$(SHARED_RCFLAGS)" \\
+		CC="\$(CC)" CFLAGS="\$(CFLAGS) \$(LIB_CFLAGS)" \\
+		CROSS_COMPILE="\$(CROSS_COMPILE)" LDFLAGS="\$(LDFLAGS)" \\
+		SHARED_LDFLAGS="\$(LIB_LDFLAGS)" SHLIB_EXT=$shlibext \\
+		SHARED_RCFLAGS="\$(RCFLAGS)" \\
 		link_shlib.$shlib_target
 EOF
 	  . (windowsdll() ? <<"EOF" : "");
@@ -988,8 +989,8 @@ $target: $objs $deps
 		PERL=\$(PERL) SRCDIR="\$(SRCDIR)" DSTDIR="$libd" \\
 		LIBDEPS="\$(PLIB_LDFLAGS) $shlibdeps \$(EX_LIBS)" \\
 		LIBNAME=$libname LDFLAGS="\$(LDFLAGS)" \\
-		CC="\$(CC)" CFLAGS="\$(CFLAGS)" \\
-		SHARED_LDFLAGS="\$(SHARED_LDFLAGS)" \\
+		CC="\$(CC)" CFLAGS="\$(CFLAGS) \$(DSO_CFLAGS)" \\
+		SHARED_LDFLAGS="\$(DSO_LDFLAGS)" \\
 		SHLIB_EXT=$dsoext \\
 		LIBEXTRAS="$objs" \\
 		link_dso.$shlib_target
@@ -1025,8 +1026,8 @@ $bin$exeext: $objs $deps
 		PERL=\$(PERL) SRCDIR=\$(SRCDIR) \\
 		APPNAME=$bin$exeext OBJECTS="$objs" \\
 		LIBDEPS="\$(PLIB_LDFLAGS) $linklibs \$(EX_LIBS)" \\
-		CC="\$(CC)" CFLAGS="\$(CFLAGS)" LDFLAGS="\$(LDFLAGS)" \\
-		LIBRPATH="\$(INSTALLTOP)/\$(LIBDIR)" \\
+		CC="\$(CC)" CFLAGS="\$(CFLAGS) \$(BIN_CFLAGS)" \\
+		LDFLAGS="\$(LDFLAGS)" LIBRPATH="\$(INSTALLTOP)/\$(LIBDIR)" \\
 		link_app.$shlib_target
 EOF
   }

Configurations/windows-makefile.tmpl

@@ -96,7 +96,7 @@ LDFLAGS={- $target{lflags} -}
 LDOUTFLAG={- $target{loutflag} || "/out:" -}
 EX_LIBS={- $target{ex_libs} -}
 LIB_CFLAGS={- join(" ", $target{lib_cflags}, $target{shared_cflag}) || "" -}
-SHARED_LDFLAGS={- $target{shared_ldflag} || "" -}
+LIB_LDFLAGS={- $target{shared_ldflag} || "" -}
 DSO_CFLAGS={- join(" ", $target{dso_cflags}, $target{shared_cflag}) || "" -}
 DSO_LDFLAGS={- join(" ", $target{dso_lflags}, $target{shared_ldflag}) || "" -}
 BIN_CFLAGS={- $target{bin_cflags} -}
@@ -284,7 +284,7 @@ EOF
      return <<"EOF"
 $target: $deps $ordinalsfile
 	\$(PERL) $mkdef_pl "$mkdef_key" 32 > $shlib.def
-	\$(LD) \$(LDFLAGS) \$(SHARED_LDFLAGS) \\
+	\$(LD) \$(LDFLAGS) \$(LIB_LDFLAGS) \\
 		/implib:$target \$(LDOUTFLAG)$shlib$shlibext /def:$shlib.def @<<
 $objs$linklibs \$(EX_LIBS)
 <<