提交 5eb2dd88 编写于 作者: A Andy Polyakov

Add sha/asm/keccak1600-armv8.pl.

Reviewed-by: NRich Salz <rsalz@openssl.org>
上级 0c3d0d4a
#!/usr/bin/env perl
# Copyright 2017 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
#
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# Keccak-1600 for ARMv8.
#
# June 2017.
#
# This is straightforward KECCAK_1X_ALT implementation. It makes no
# sense to attempt SIMD/NEON implementation for following reason.
# 64-bit lanes of vector registers can't be addressed as easily as in
# 32-bit mode. This means that 64-bit NEON is bound to be slower than
# 32-bit NEON, and this implementation is faster than 32-bit NEON on
# same processor. Even though it takes more scalar xor's and andn's,
# it gets compensated by availability of rotate. Not to forget that
# most processors achieve higher issue rate with scalar instructions.
#
######################################################################
# Numbers are cycles per processed byte.
#
# r=1088(*)
#
# Cortex-A53 13
# Cortex-A57 12
# X-Gene 14
# Mongoose 10
# Denver 7.8
# Apple A7 7.2
#
# (*) Corresponds to SHA3-256. No improvement coefficients are listed
# because they vary too much from compiler to compiler. Newer
# compiler does much better and improvement varies from 5% on
# Cortex-A57 to 25% on Cortex-A53. While in comparison to older
# compiler this code is at least 2x faster...
$flavour = shift;
$output = shift;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
open OUT,"| \"$^X\" $xlate $flavour $output";
*STDOUT=*OUT;
my @A = map([ "x$_", "x".($_+1), "x".($_+2), "x".($_+3), "x".($_+4) ],
(0, 5, 10, 15, 20));
$A[3][3] = "x25"; # x18 is reserved
my @C = map("x$_", (26,27,28,30));
my @rhotates = ([ 0, 1, 62, 28, 27 ],
[ 36, 44, 6, 55, 20 ],
[ 3, 10, 43, 25, 39 ],
[ 41, 45, 15, 21, 8 ],
[ 18, 2, 61, 56, 14 ]);
$code.=<<___;
.text
.align 8 // strategic alignment and padding that allows to use
// address value as loop termination condition...
.quad 0,0,0,0,0,0,0,0
.type iotas,%object
iotas:
.quad 0x0000000000000001
.quad 0x0000000000008082
.quad 0x800000000000808a
.quad 0x8000000080008000
.quad 0x000000000000808b
.quad 0x0000000080000001
.quad 0x8000000080008081
.quad 0x8000000000008009
.quad 0x000000000000008a
.quad 0x0000000000000088
.quad 0x0000000080008009
.quad 0x000000008000000a
.quad 0x000000008000808b
.quad 0x800000000000008b
.quad 0x8000000000008089
.quad 0x8000000000008003
.quad 0x8000000000008002
.quad 0x8000000000000080
.quad 0x000000000000800a
.quad 0x800000008000000a
.quad 0x8000000080008081
.quad 0x8000000000008080
.quad 0x0000000080000001
.quad 0x8000000080008008
.size iotas,.-iotas
.type KeccakF1600_int,%function
.align 5
KeccakF1600_int:
adr $C[2],iotas
stp $C[2],x30,[sp,#16] // 32 bytes on top are mine
b .Loop
.align 4
.Loop:
////////////////////////////////////////// Theta
eor $C[0],$A[0][0],$A[1][0]
stp $A[0][4],$A[1][4],[sp,#0] // offload pair...
eor $C[1],$A[0][1],$A[1][1]
eor $C[2],$A[0][2],$A[1][2]
eor $C[3],$A[0][3],$A[1][3]
___
$C[4]=$A[0][4];
$C[5]=$A[1][4];
$code.=<<___;
eor $C[4],$A[0][4],$A[1][4]
eor $C[0],$C[0],$A[2][0]
eor $C[1],$C[1],$A[2][1]
eor $C[2],$C[2],$A[2][2]
eor $C[3],$C[3],$A[2][3]
eor $C[4],$C[4],$A[2][4]
eor $C[0],$C[0],$A[3][0]
eor $C[1],$C[1],$A[3][1]
eor $C[2],$C[2],$A[3][2]
eor $C[3],$C[3],$A[3][3]
eor $C[4],$C[4],$A[3][4]
eor $C[0],$C[0],$A[4][0]
eor $C[2],$C[2],$A[4][2]
eor $C[1],$C[1],$A[4][1]
eor $C[3],$C[3],$A[4][3]
eor $C[4],$C[4],$A[4][4]
eor $C[5],$C[0],$C[2],ror#63
eor $A[0][1],$A[0][1],$C[5]
eor $A[1][1],$A[1][1],$C[5]
eor $A[2][1],$A[2][1],$C[5]
eor $A[3][1],$A[3][1],$C[5]
eor $A[4][1],$A[4][1],$C[5]
eor $C[5],$C[1],$C[3],ror#63
eor $C[2],$C[2],$C[4],ror#63
eor $C[3],$C[3],$C[0],ror#63
eor $C[4],$C[4],$C[1],ror#63
eor $C[1], $A[0][2],$C[5] // mov $C[1],$A[0][2]
eor $A[1][2],$A[1][2],$C[5]
eor $A[2][2],$A[2][2],$C[5]
eor $A[3][2],$A[3][2],$C[5]
eor $A[4][2],$A[4][2],$C[5]
eor $A[0][0],$A[0][0],$C[4]
eor $A[1][0],$A[1][0],$C[4]
eor $A[2][0],$A[2][0],$C[4]
eor $A[3][0],$A[3][0],$C[4]
eor $A[4][0],$A[4][0],$C[4]
___
$C[4]=undef;
$C[5]=undef;
$code.=<<___;
ldp $A[0][4],$A[1][4],[sp,#0] // re-load offloaded data
eor $C[0], $A[0][3],$C[2] // mov $C[0],$A[0][3]
eor $A[1][3],$A[1][3],$C[2]
eor $A[2][3],$A[2][3],$C[2]
eor $A[3][3],$A[3][3],$C[2]
eor $A[4][3],$A[4][3],$C[2]
eor $C[2], $A[0][4],$C[3] // mov $C[2],$A[0][4]
eor $A[1][4],$A[1][4],$C[3]
eor $A[2][4],$A[2][4],$C[3]
eor $A[3][4],$A[3][4],$C[3]
eor $A[4][4],$A[4][4],$C[3]
////////////////////////////////////////// Rho+Pi
mov $C[3],$A[0][1]
ror $A[0][1],$A[1][1],#64-$rhotates[1][1]
//mov $C[1],$A[0][2]
ror $A[0][2],$A[2][2],#64-$rhotates[2][2]
//mov $C[0],$A[0][3]
ror $A[0][3],$A[3][3],#64-$rhotates[3][3]
//mov $C[2],$A[0][4]
ror $A[0][4],$A[4][4],#64-$rhotates[4][4]
ror $A[1][1],$A[1][4],#64-$rhotates[1][4]
ror $A[2][2],$A[2][3],#64-$rhotates[2][3]
ror $A[3][3],$A[3][2],#64-$rhotates[3][2]
ror $A[4][4],$A[4][1],#64-$rhotates[4][1]
ror $A[1][4],$A[4][2],#64-$rhotates[4][2]
ror $A[2][3],$A[3][4],#64-$rhotates[3][4]
ror $A[3][2],$A[2][1],#64-$rhotates[2][1]
ror $A[4][1],$A[1][3],#64-$rhotates[1][3]
ror $A[4][2],$A[2][4],#64-$rhotates[2][4]
ror $A[3][4],$A[4][3],#64-$rhotates[4][3]
ror $A[2][1],$A[1][2],#64-$rhotates[1][2]
ror $A[1][3],$A[3][1],#64-$rhotates[3][1]
ror $A[2][4],$A[4][0],#64-$rhotates[4][0]
ror $A[4][3],$A[3][0],#64-$rhotates[3][0]
ror $A[1][2],$A[2][0],#64-$rhotates[2][0]
ror $A[3][1],$A[1][0],#64-$rhotates[1][0]
ror $A[1][0],$C[0],#64-$rhotates[0][3]
ror $A[2][0],$C[3],#64-$rhotates[0][1]
ror $A[3][0],$C[2],#64-$rhotates[0][4]
ror $A[4][0],$C[1],#64-$rhotates[0][2]
////////////////////////////////////////// Chi+Iota
bic $C[0],$A[0][2],$A[0][1]
bic $C[1],$A[0][3],$A[0][2]
bic $C[2],$A[0][0],$A[0][4]
bic $C[3],$A[0][1],$A[0][0]
eor $A[0][0],$A[0][0],$C[0]
bic $C[0],$A[0][4],$A[0][3]
eor $A[0][1],$A[0][1],$C[1]
ldr $C[1],[sp,#16]
eor $A[0][3],$A[0][3],$C[2]
eor $A[0][4],$A[0][4],$C[3]
eor $A[0][2],$A[0][2],$C[0]
ldr $C[3],[$C[1]],#8 // Iota[i++]
bic $C[0],$A[1][2],$A[1][1]
tst $C[1],#255 // are we done?
str $C[1],[sp,#16]
bic $C[1],$A[1][3],$A[1][2]
bic $C[2],$A[1][0],$A[1][4]
eor $A[0][0],$A[0][0],$C[3] // A[0][0] ^= Iota
bic $C[3],$A[1][1],$A[1][0]
eor $A[1][0],$A[1][0],$C[0]
bic $C[0],$A[1][4],$A[1][3]
eor $A[1][1],$A[1][1],$C[1]
eor $A[1][3],$A[1][3],$C[2]
eor $A[1][4],$A[1][4],$C[3]
eor $A[1][2],$A[1][2],$C[0]
bic $C[0],$A[2][2],$A[2][1]
bic $C[1],$A[2][3],$A[2][2]
bic $C[2],$A[2][0],$A[2][4]
bic $C[3],$A[2][1],$A[2][0]
eor $A[2][0],$A[2][0],$C[0]
bic $C[0],$A[2][4],$A[2][3]
eor $A[2][1],$A[2][1],$C[1]
eor $A[2][3],$A[2][3],$C[2]
eor $A[2][4],$A[2][4],$C[3]
eor $A[2][2],$A[2][2],$C[0]
bic $C[0],$A[3][2],$A[3][1]
bic $C[1],$A[3][3],$A[3][2]
bic $C[2],$A[3][0],$A[3][4]
bic $C[3],$A[3][1],$A[3][0]
eor $A[3][0],$A[3][0],$C[0]
bic $C[0],$A[3][4],$A[3][3]
eor $A[3][1],$A[3][1],$C[1]
eor $A[3][3],$A[3][3],$C[2]
eor $A[3][4],$A[3][4],$C[3]
eor $A[3][2],$A[3][2],$C[0]
bic $C[0],$A[4][2],$A[4][1]
bic $C[1],$A[4][3],$A[4][2]
bic $C[2],$A[4][0],$A[4][4]
bic $C[3],$A[4][1],$A[4][0]
eor $A[4][0],$A[4][0],$C[0]
bic $C[0],$A[4][4],$A[4][3]
eor $A[4][1],$A[4][1],$C[1]
eor $A[4][3],$A[4][3],$C[2]
eor $A[4][4],$A[4][4],$C[3]
eor $A[4][2],$A[4][2],$C[0]
bne .Loop
ldr x30,[sp,#24]
ret
.size KeccakF1600_int,.-KeccakF1600_int
.type KeccakF1600,%function
.align 5
KeccakF1600:
stp x29,x30,[sp,#-128]!
add x29,sp,#0
stp x19,x20,[sp,#16]
stp x21,x22,[sp,#32]
stp x23,x24,[sp,#48]
stp x25,x26,[sp,#64]
stp x27,x28,[sp,#80]
sub sp,sp,#48
str x0,[sp,#32] // offload argument
mov $C[0],x0
ldp $A[0][0],$A[0][1],[x0,#16*0]
ldp $A[0][2],$A[0][3],[$C[0],#16*1]
ldp $A[0][4],$A[1][0],[$C[0],#16*2]
ldp $A[1][1],$A[1][2],[$C[0],#16*3]
ldp $A[1][3],$A[1][4],[$C[0],#16*4]
ldp $A[2][0],$A[2][1],[$C[0],#16*5]
ldp $A[2][2],$A[2][3],[$C[0],#16*6]
ldp $A[2][4],$A[3][0],[$C[0],#16*7]
ldp $A[3][1],$A[3][2],[$C[0],#16*8]
ldp $A[3][3],$A[3][4],[$C[0],#16*9]
ldp $A[4][0],$A[4][1],[$C[0],#16*10]
ldp $A[4][2],$A[4][3],[$C[0],#16*11]
ldr $A[4][4],[$C[0],#16*12]
bl KeccakF1600_int
ldr $C[0],[sp,#32]
stp $A[0][0],$A[0][1],[$C[0],#16*0]
stp $A[0][2],$A[0][3],[$C[0],#16*1]
stp $A[0][4],$A[1][0],[$C[0],#16*2]
stp $A[1][1],$A[1][2],[$C[0],#16*3]
stp $A[1][3],$A[1][4],[$C[0],#16*4]
stp $A[2][0],$A[2][1],[$C[0],#16*5]
stp $A[2][2],$A[2][3],[$C[0],#16*6]
stp $A[2][4],$A[3][0],[$C[0],#16*7]
stp $A[3][1],$A[3][2],[$C[0],#16*8]
stp $A[3][3],$A[3][4],[$C[0],#16*9]
stp $A[4][0],$A[4][1],[$C[0],#16*10]
stp $A[4][2],$A[4][3],[$C[0],#16*11]
str $A[4][4],[$C[0],#16*12]
ldp x19,x20,[x29,#16]
add sp,sp,#48
ldp x21,x22,[x29,#32]
ldp x23,x24,[x29,#48]
ldp x25,x26,[x29,#64]
ldp x27,x28,[x29,#80]
ldp x29,x30,[sp],#128
ret
.size KeccakF1600,.-KeccakF1600
.globl SHA3_absorb
.type SHA3_absorb,%function
.align 5
SHA3_absorb:
stp x29,x30,[sp,#-128]!
add x29,sp,#0
stp x19,x20,[sp,#16]
stp x21,x22,[sp,#32]
stp x23,x24,[sp,#48]
stp x25,x26,[sp,#64]
stp x27,x28,[sp,#80]
sub sp,sp,#64
stp x0,x1,[sp,#32] // offload arguments
stp x2,x3,[sp,#48]
mov $C[0],x0 // uint64_t A[5][5]
mov $C[1],x1 // const void *inp
mov $C[2],x2 // size_t len
mov $C[3],x3 // size_t bsz
ldp $A[0][0],$A[0][1],[$C[0],#16*0]
ldp $A[0][2],$A[0][3],[$C[0],#16*1]
ldp $A[0][4],$A[1][0],[$C[0],#16*2]
ldp $A[1][1],$A[1][2],[$C[0],#16*3]
ldp $A[1][3],$A[1][4],[$C[0],#16*4]
ldp $A[2][0],$A[2][1],[$C[0],#16*5]
ldp $A[2][2],$A[2][3],[$C[0],#16*6]
ldp $A[2][4],$A[3][0],[$C[0],#16*7]
ldp $A[3][1],$A[3][2],[$C[0],#16*8]
ldp $A[3][3],$A[3][4],[$C[0],#16*9]
ldp $A[4][0],$A[4][1],[$C[0],#16*10]
ldp $A[4][2],$A[4][3],[$C[0],#16*11]
ldr $A[4][4],[$C[0],#16*12]
b .Loop_absorb
.align 4
.Loop_absorb:
subs $C[0],$C[2],$C[3] // len - bsz
blo .Labsorbed
str $C[0],[sp,#48] // save len - bsz
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[0][0],$A[0][0],$C[0]
cmp $C[3],#8*2
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[0][1],$A[0][1],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[0][2],$A[0][2],$C[0]
cmp $C[3],#8*4
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[0][3],$A[0][3],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[0][4],$A[0][4],$C[0]
cmp $C[3],#8*6
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[1][0],$A[1][0],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[1][1],$A[1][1],$C[0]
cmp $C[3],#8*8
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[1][2],$A[1][2],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[1][3],$A[1][3],$C[0]
cmp $C[3],#8*10
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[1][4],$A[1][4],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[2][0],$A[2][0],$C[0]
cmp $C[3],#8*12
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[2][1],$A[2][1],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[2][2],$A[2][2],$C[0]
cmp $C[3],#8*14
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[2][3],$A[2][3],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[2][4],$A[2][4],$C[0]
cmp $C[3],#8*16
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[3][0],$A[3][0],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[3][1],$A[3][1],$C[0]
cmp $C[3],#8*18
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[3][2],$A[3][2],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[3][3],$A[3][3],$C[0]
cmp $C[3],#8*20
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[3][4],$A[3][4],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[4][0],$A[4][0],$C[0]
cmp $C[3],#8*22
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[4][1],$A[4][1],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[4][2],$A[4][2],$C[0]
cmp $C[3],#8*24
blo .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[4][3],$A[4][3],$C[0]
beq .Lprocess_block
ldr $C[0],[$C[1]],#8 // *inp++
#ifdef __AARCH64EB__
rev $C[0],$C[0]
#endif
eor $A[4][4],$A[4][4],$C[0]
.Lprocess_block:
str $C[1],[sp,#40] // save inp
bl KeccakF1600_int
ldr $C[1],[sp,#40] // restore arguments
ldp $C[2],$C[3],[sp,#48]
b .Loop_absorb
.align 4
.Labsorbed:
ldr $C[1],[sp,#32]
stp $A[0][0],$A[0][1],[$C[1],#16*0]
stp $A[0][2],$A[0][3],[$C[1],#16*1]
stp $A[0][4],$A[1][0],[$C[1],#16*2]
stp $A[1][1],$A[1][2],[$C[1],#16*3]
stp $A[1][3],$A[1][4],[$C[1],#16*4]
stp $A[2][0],$A[2][1],[$C[1],#16*5]
stp $A[2][2],$A[2][3],[$C[1],#16*6]
stp $A[2][4],$A[3][0],[$C[1],#16*7]
stp $A[3][1],$A[3][2],[$C[1],#16*8]
stp $A[3][3],$A[3][4],[$C[1],#16*9]
stp $A[4][0],$A[4][1],[$C[1],#16*10]
stp $A[4][2],$A[4][3],[$C[1],#16*11]
str $A[4][4],[$C[1],#16*12]
mov x0,$C[0] // return value
ldp x19,x20,[x29,#16]
add sp,sp,#64
ldp x21,x22,[x29,#32]
ldp x23,x24,[x29,#48]
ldp x25,x26,[x29,#64]
ldp x27,x28,[x29,#80]
ldp x29,x30,[sp],#128
ret
.size SHA3_absorb,.-SHA3_absorb
___
{
my ($A_flat,$out,$len,$bsz) = map("x$_",(19..22));
$code.=<<___;
.globl SHA3_squeeze
.type SHA3_squeeze,%function
.align 5
SHA3_squeeze:
stp x29,x30,[sp,#-48]!
add x29,sp,#0
stp x19,x20,[sp,#16]
stp x21,x22,[sp,#32]
mov $A_flat,x0 // put aside arguments
mov $out,x1
mov $len,x2
mov $bsz,x3
.Loop_squeeze:
ldr x4,[x0],#8
cmp $len,#8
blo .Lsqueeze_tail
#ifdef __AARCH64EB__
rev x4,x4
#endif
str x4,[$out],#8
subs $len,$len,#8
beq .Lsqueeze_done
subs x3,x3,#8
bhi .Loop_squeeze
mov x0,$A_flat
bl KeccakF1600
mov x0,$A_flat
mov x3,$bsz
b .Loop_squeeze
.align 4
.Lsqueeze_tail:
strb w4,[$out],#1
lsr x4,x4,#8
subs $len,$len,#1
beq .Lsqueeze_done
strb w4,[$out],#1
lsr x4,x4,#8
subs $len,$len,#1
beq .Lsqueeze_done
strb w4,[$out],#1
lsr x4,x4,#8
subs $len,$len,#1
beq .Lsqueeze_done
strb w4,[$out],#1
lsr x4,x4,#8
subs $len,$len,#1
beq .Lsqueeze_done
strb w4,[$out],#1
lsr x4,x4,#8
subs $len,$len,#1
beq .Lsqueeze_done
strb w4,[$out],#1
lsr x4,x4,#8
subs $len,$len,#1
beq .Lsqueeze_done
strb w4,[$out],#1
.Lsqueeze_done:
ldp x19,x20,[sp,#16]
ldp x21,x22,[sp,#32]
ldp x29,x30,[sp],#48
ret
.size SHA3_squeeze,.-SHA3_squeeze
.asciz "Keccak-1600 absorb and squeeze for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
___
}
print $code;
close STDOUT;
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册