Skip to content

T
Third Party Openssl

OpenHarmony / Third Party Openssl
1 年多 前同步成功

通知 10
Star 18
Fork 1
T
Third Party Openssl
提交 3d5fd312 编写于 作者: A Andy Polyakov
浏览文件
操作

Avoid L1 cache aliasing even between key and S-boxes.

上级 c7199e62
隐藏空白更改
内联 并排
Showing with 111 addition and 32 deletion
crypto/aes/asm/aes-586.pl
浏览文件 @ 3d5fd312
......@@ -6,7 +6,7 @@
# forms are granted according to the OpenSSL license.
# ====================================================================
#
# Version 3.3.
# Version 3.4.
#
# You might fail to appreciate this module performance from the first
# try. If compared to "vanilla" linux-ia32-icc target, i.e. considered
......@@ -60,6 +60,12 @@
# misaligned, which unfortunately has negative impact on elder IA-32
# implementations, Pentium suffered 30% penalty, PIII - 10%.
#
# Version 3.3 avoids L1 cache aliasing between stack frame and
# S-boxes, and 3.4 - L1 cache aliasing even between key schedule. The
# latter is achieved by copying the key schedule to controlled place in
# stack. This unfortunately has rather strong impact on small block CBC
# performance, ~2x deterioration on 16-byte block if compared to 3.3.
#
# Current ECB performance numbers for 128-bit key in CPU cycles per
# processed byte [measure commonly used by AES benchmarkers] are:
#
......@@ -81,6 +87,12 @@ $s3="edx";
$key="edi";
$acc="esi";
$compromise=0; # $compromise=128 abstains from copying key
# schedule to stack when encrypting inputs
# shorter than 128 bytes at the cost of
# risksing aliasing with S-boxes. In return
# you get way better, up to +70%, small block
# performance.
$small_footprint=1; # $small_footprint=1 code is ~5% slower [on
# recent µ-archs], but ~5 times smaller!
# I favor compact code to minimize cache
......@@ -792,6 +804,7 @@ my $_key=&DWP(32,"esp"); #copy of wparam(3)
my $_ivp=&DWP(36,"esp"); #copy of wparam(4)
my $_tmp=&DWP(40,"esp"); #volatile variable
my $ivec=&DWP(44,"esp"); #ivec[16]
my $aes_key=&DWP(60,"esp"); #copy of aes_key
&public_label("AES_Te");
&public_label("AES_Td");
......@@ -804,28 +817,37 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&set_label("pic_point");
&blindpop("ebp");
&pushf ();
&cld ();
&cmp (&wparam(5),0);
&je (&label("DECRYPT"));
&lea ("ebp",&DWP(&label("AES_Te")."-".&label("pic_point"),"ebp"));
# allocate aligned stack frame...
&lea ($key,&DWP(-44,"esp"));
&lea ($key,&DWP(-64-260,"esp"));
&and ($key,-64);
# ... and make sure it doesn't alias with AES_Te modulo 4096
&mov ($s1,"ebp");
&mov ($s0,"ebp");
&lea ($s1,&DWP(2048,"ebp"));
&mov ($s3,$key);
&and ($s1,0xfff); # t = %ebp&0xfff
&and ($s0,0xfff); # s = %ebp&0xfff
&and ($s1,0xfff); # e = (%ebp+2048)&0xfff
&and ($s3,0xfff); # p = %esp&0xfff
&cmp ($s3,$s1); # if (p<t) goto ok
&jb (&label("te_ok"));
&lea ($acc,&DWP(2048,$s1));
&cmp ($s3,$acc); # if (p>=(t+2048)) goto ok
&jae (&label("te_ok"));
&sub ($s1,$s3); # t -= p
&lea ($key,&DWP(-64,$key,$s1));# %esp -= (p-t)+64
&cmp ($s3,$s1); # if (p>=e) %esp =- (p-e);
&jb (&label("te_break_out"));
&sub ($s3,$s1);
&sub ($key,$s3);
&jmp (&label("te_ok"));
&set_label("te_break_out"); # else %esp -= (p-s)&0xfff + framesz;
&sub ($s3,$s0);
&and ($s3,0xfff);
&add ($s3,64+320);
&sub ($key,$s3);
&align (4);
&set_label("te_ok");
&mov ($s0,&wparam(0)); # load inp
......@@ -843,6 +865,19 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&mov ($_key,$s3); # save copy of key
&mov ($_ivp,$acc); # save copy of ivp
if ($compromise) {
&cmp ($s2,$compromise);
&jb (&label("skip_ecopy"));
}
# copy key schedule to stack
&mov ("ecx",260/4);
&mov ("esi",$s3);
&lea ("edi",$aes_key);
&mov ($_key,"edi");
&align (4);
&data_word(0xF689A5F3); # rep movsd
&set_label("skip_ecopy") if ($compromise);
&mov ($acc,$s0);
&mov ($key,16);
&align (4);
......@@ -906,28 +941,42 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&mov (&DWP(4,$acc),$s1);
&mov (&DWP(8,$acc),$s2);
&mov (&DWP(12,$acc),$s3);
&mov ("edi",$_key);
&mov ("esp",$_esp);
if ($compromise) {
&cmp (&wparam(2),$compromise);
&jb (&label("skip_ezero"));
}
# zero copy of key schedule
&mov ("ecx",256/4);
&xor ("eax","eax");
&align (4);
&data_word(0xF689ABF3); # rep stosd
&set_label("skip_ezero") if ($compromise);
&popf ();
&set_label("enc_out");
&function_end_A();
&pushf (); # kludge, never executed
&align (4);
&set_label("enc_tail");
&push ($key eq "edi" ? $key : ""); # push ivp
&pushf ();
&mov ($key,$_out); # load out
&mov ($s1,16);
&sub ($s1,$s2);
&cmp ($key,$acc); # compare with inp
&je (&label("enc_in_place"));
&data_word(0x90A4F3FC); # cld; rep movsb; nop # copy input
&align (4);
&data_word(0xF689A4F3); # rep movsb # copy input
&jmp (&label("enc_skip_in_place"));
&set_label("enc_in_place");
&lea ($key,&DWP(0,$key,$s2));
&set_label("enc_skip_in_place");
&mov ($s2,$s1);
&xor ($s0,$s0);
&data_word(0x90AAF3FC); # cld; rep stosb; nop # zero tail
&popf ();
&align (4);
&data_word(0xF689AAF3); # rep stosb # zero tail
&pop ($key); # pop ivp
&mov ($acc,$_out); # output as input
......@@ -942,22 +991,28 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&lea ("ebp",&DWP(&label("AES_Td")."-".&label("pic_point"),"ebp"));
# allocate aligned stack frame...
&lea ($key,&DWP(-64,"esp"));
&lea ($key,&DWP(-64-260,"esp"));
&and ($key,-64);
# ... and make sure it doesn't alias with AES_Td modulo 4096
&mov ($s1,"ebp");
&mov ($s0,"ebp");
&lea ($s1,&DWP(3072,"ebp"));
&mov ($s3,$key);
&and ($s1,0xfff); # t = %ebp&0xfff
&and ($s0,0xfff); # s = %ebp&0xfff
&and ($s1,0xfff); # e = (%ebp+3072)&0xfff
&and ($s3,0xfff); # p = %esp&0xfff
&cmp ($s3,$s1); # if (p<t) goto ok
&jb (&label("td_ok"));
&lea ($acc,&DWP(3072,$s1));
&cmp ($s3,$acc); # if (p>=(t+3072)) goto ok
&jae (&label("td_ok"));
&sub ($s1,$s3); # t -= p
&lea ($key,&DWP(-64,$key,$s1));# %esp -= (p-t)+64
&cmp ($s3,$s1); # if (p>=e) %esp =- (p-e);
&jb (&label("td_break_out"));
&sub ($s3,$s1);
&sub ($key,$s3);
&jmp (&label("td_ok"));
&set_label("td_break_out"); # else %esp -= (p-s)&0xfff + framesz;
&sub ($s3,$s0);
&and ($s3,0xfff);
&add ($s3,64+320);
&sub ($key,$s3);
&align (4);
&set_label("td_ok");
&mov ($s0,&wparam(0)); # load inp
......@@ -975,6 +1030,19 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&mov ($_key,$s3); # save copy of key
&mov ($_ivp,$acc); # save copy of ivp
if ($compromise) {
&cmp ($s2,$compromise);
&jb (&label("skip_dcopy"));
}
# copy key schedule to stack
&mov ("ecx",260/4);
&mov ("esi",$s3);
&lea ("edi",$aes_key);
&mov ($_key,"edi");
&align (4);
&data_word(0xF689A5F3); # rep movsd
&set_label("skip_dcopy") if ($compromise);
&mov ($acc,$s0);
&mov ($key,24);
&align (4);
......@@ -1053,10 +1121,8 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&lea ($s2 eq "ecx" ? $s2 : "",&DWP(16,$acc));
&mov ($acc eq "esi" ? $acc : "",$key);
&mov ($key eq "edi" ? $key : "",$_out); # load out
&pushf ();
&data_word(0x90A4F3FC); # cld; rep movsb; nop # copy output
&popf ();
&mov ($key,$_inp); # use inp as temp ivp
&data_word(0xF689A4F3); # rep movsb # copy output
&mov ($key,$_inp); # use inp as temp ivp
&jmp (&label("dec_end"));
&align (4);
......@@ -1122,13 +1188,23 @@ my $ivec=&DWP(44,"esp"); #ivec[16]
&lea ($key,&DWP(0,$key,$s2));
&lea ($acc,&DWP(16,$acc,$s2));
&neg ($s2 eq "ecx" ? $s2 : "");
&pushf ();
&data_word(0x90A4F3FC); # cld; rep movsb; nop # restore tail
&popf ();
&data_word(0xF689A4F3); # rep movsb # restore tail
&align (4);
&set_label("dec_out");
&mov ("edi",$_key);
&mov ("esp",$_esp);
if ($compromise) {
&cmp (&wparam(2),$compromise);
&jb (&label("skip_dzero"));
}
# zero copy of key schedule
&mov ("ecx",256/4);
&xor ("eax","eax");
&align (4);
&data_word(0xF689ABF3); # rep stosd
&set_label("skip_dzero") if ($compromise);
&popf ();
&function_end("AES_cbc_encrypt");
}
......
crypto/perlasm/x86ms.pl
浏览文件 @ 3d5fd312
......@@ -176,6 +176,7 @@ sub main'rdtsc { &out0("DW\t0310Fh"); }
sub main'halt { &out0("hlt"); }
sub main'movz { &out2("movzx",@_); }
sub main'neg { &out1("neg",@_); }
sub main'cld { &out0("cld"); }
# SSE2
sub main'emms { &out0("emms"); }
......
crypto/perlasm/x86nasm.pl
浏览文件 @ 3d5fd312
......@@ -194,6 +194,7 @@ sub main'rdtsc { &out0("rdtsc"); }
sub main'halt { &out0("hlt"); }
sub main'movz { &out2("movzx",@_); }
sub main'neg { &out1("neg",@_); }
sub main'cld { &out0("cld"); }
# SSE2
sub main'emms { &out0("emms"); }
......
crypto/perlasm/x86unix.pl
浏览文件 @ 3d5fd312
......@@ -210,6 +210,7 @@ sub main'rdtsc { &out0(".byte\t0x0f,0x31"); }
sub main'halt { &out0("hlt"); }
sub main'movz { &out2("movzbl",@_); }
sub main'neg { &out1("negl",@_); }
sub main'cld { &out0("cld"); }
# SSE2
sub main'emms { &out0("emms"); }
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或