Skip to content

T
Third Party Openssl

OpenHarmony / Third Party Openssl
1 年多 前同步成功

通知 10
Star 18
Fork 1
T
Third Party Openssl
提交 09854736 编写于 作者: A Andy Polyakov
浏览文件
操作

sha1-mips.pl, mips-mont.pl: unify MIPS assembler modules in respect to 

ABI and binutils.
上级 8986e372
隐藏空白更改
内联 并排
Showing with 529 addition and 41 deletion
crypto/bn/asm/mips-mont.pl 0 → 100644
浏览文件 @ 09854736
#!/usr/bin/env perl
#
# ====================================================================
# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# This module doesn't present direct interest for OpenSSL, because it
# doesn't provide better performance for longer keys. While 512-bit
# RSA private key operations are 40% faster, 1024-bit ones are hardly
# faster at all, while longer key operations are slower by up to 20%.
# It might be of interest to embedded system developers though, as
# it's smaller than 1KB, yet offers ~3x improvement over compiler
# generated code.
######################################################################
# There is a number of MIPS ABI in use, O32 and N32/64 are most
# widely used. Then there is a new contender: NUBI. It appears that if
# one picks the latter, it's possible to arrange code in ABI neutral
# manner. Therefore let's stick to NUBI register layout:
#
($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
#
# The return value is placed in $a0. Following coding rules facilitate
# interoperability:
#
# - never ever touch $tp, "thread pointer", former $gp;
# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
# old code];
# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
#
# For reference here is register layout for N32/64 MIPS ABIs:
#
# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
#
$flavour = shift; # supported flavours are o32,n32,64,nubi32,nubi64
if ($flavour =~ /64|n32/i) {
$PTR_ADD="dadd"; # incidentally works even on n32
$PTR_SUB="dsub"; # incidentally works even on n32
$REG_S="sd";
$REG_L="ld";
$SZREG=8;
} else {
$PTR_ADD="add";
$PTR_SUB="sub";
$REG_S="sw";
$REG_L="lw";
$SZREG=4;
}
$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0x00fff000 : 0x00ff0000;
#
# <appro@openssl.org>
#
######################################################################
while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
if ($flavour =~ /64|n32/i) {
$LD="ld";
$ST="sd";
$MULTU="dmultu";
$ADDU="daddu";
$SUBU="dsubu";
$BNSZ=8;
} else {
$LD="lw";
$ST="sw";
$MULTU="multu";
$ADDU="addu";
$SUBU="subu";
$BNSZ=4;
}
# int bn_mul_mont(
$rp=$a0; # BN_ULONG *rp,
$ap=$a1; # const BN_ULONG *ap,
$bp=$a2; # const BN_ULONG *bp,
$np=$a3; # const BN_ULONG *np,
$n0=$a4; # const BN_ULONG *n0,
$num=$a5; # int num);
$lo0=$a6;
$hi0=$a7;
$lo1=$t1;
$hi1=$t2;
$aj=$s0;
$bi=$s1;
$nj=$s2;
$tp=$s3;
$alo=$s4;
$ahi=$s5;
$nlo=$s6;
$nhi=$s7;
$tj=$s8;
$i=$s9;
$j=$s10;
$m1=$s11;
$FRAMESIZE=14;
$code=<<___;
.text
.set noat
.set noreorder
.align 5
.globl bn_mul_mont
.ent bn_mul_mont
bn_mul_mont:
___
$code.=<<___ if ($flavour =~ /o32/i);
lw $n0,16($sp)
lw $num,20($sp)
___
$code.=<<___;
slt $at,$num,4
beqzl $at,bn_mul_mont_internal
li $t0,0
jr $ra
li $a0,0
.end bn_mul_mont
.align 5
.ent bn_mul_mont_internal
bn_mul_mont_internal:
.frame $fp,$FRAMESIZE*$SZREG,$ra
.mask 0x40000000|$SAVED_REGS_MASK,-$SZREG
$PTR_SUB $sp,$FRAMESIZE*$SZREG
$REG_S $fp,($FRAMESIZE-1)*$SZREG($sp)
$REG_S $s11,($FRAMESIZE-2)*$SZREG($sp)
$REG_S $s10,($FRAMESIZE-3)*$SZREG($sp)
$REG_S $s9,($FRAMESIZE-4)*$SZREG($sp)
$REG_S $s8,($FRAMESIZE-5)*$SZREG($sp)
$REG_S $s7,($FRAMESIZE-6)*$SZREG($sp)
$REG_S $s6,($FRAMESIZE-7)*$SZREG($sp)
$REG_S $s5,($FRAMESIZE-8)*$SZREG($sp)
$REG_S $s4,($FRAMESIZE-9)*$SZREG($sp)
___
$code.=<<___ if ($flavour =~ /nubi/i);
$REG_S $s3,($FRAMESIZE-10)*$SZREG($sp)
$REG_S $s2,($FRAMESIZE-11)*$SZREG($sp)
$REG_S $s1,($FRAMESIZE-12)*$SZREG($sp)
$REG_S $s0,($FRAMESIZE-13)*$SZREG($sp)
___
$code.=<<___;
move $fp,$sp
.set reorder
$LD $n0,0($n0)
$LD $bi,0($bp) # bp[0]
$LD $aj,0($ap) # ap[0]
$LD $nj,0($np) # np[0]
$PTR_SUB $sp,2*$BNSZ # place for two extra words
sll $num,`log($BNSZ)/log(2)`
li $at,-4096
$PTR_SUB $sp,$num
and $sp,$at
$MULTU $aj,$bi
$LD $alo,$BNSZ($ap)
$LD $nlo,$BNSZ($np)
mflo $lo0
mfhi $hi0
$MULTU $lo0,$n0
mflo $m1
$MULTU $alo,$bi
mflo $alo
mfhi $ahi
$MULTU $nj,$m1
mflo $lo1
mfhi $hi1
$MULTU $nlo,$m1
$ADDU $lo1,$lo0
sltu $at,$lo1,$lo0
$ADDU $hi1,$at
mflo $nlo
mfhi $nhi
move $tp,$sp
li $j,2*$BNSZ
.align 4
.L1st:
.set noreorder
$PTR_ADD $aj,$ap,$j
$PTR_ADD $nj,$np,$j
$LD $aj,($aj)
$LD $nj,($nj)
$MULTU $aj,$bi
$ADDU $lo0,$alo,$hi0
$ADDU $lo1,$nlo,$hi1
sltu $at,$lo0,$hi0
sltu $t0,$lo1,$hi1
$ADDU $hi0,$ahi,$at
$ADDU $hi1,$nhi,$t0
mflo $alo
mfhi $ahi
$ADDU $lo1,$lo0
sltu $at,$lo1,$lo0
$MULTU $nj,$m1
$ADDU $hi1,$at
addu $j,$BNSZ
$ST $lo1,($tp)
sltu $t0,$j,$num
mflo $nlo
mfhi $nhi
bnez $t0,.L1st
$PTR_ADD $tp,$BNSZ
.set reorder
$ADDU $lo0,$alo,$hi0
sltu $at,$lo0,$hi0
$ADDU $hi0,$ahi,$at
$ADDU $lo1,$nlo,$hi1
sltu $t0,$lo1,$hi1
$ADDU $hi1,$nhi,$t0
$ADDU $lo1,$lo0
sltu $at,$lo1,$lo0
$ADDU $hi1,$at
$ST $lo1,($tp)
$ADDU $hi1,$hi0
sltu $at,$hi1,$hi0
$ST $hi1,$BNSZ($tp)
$ST $at,2*$BNSZ($tp)
li $i,$BNSZ
.align 4
.Louter:
$PTR_ADD $bi,$bp,$i
$LD $bi,($bi)
$LD $aj,($ap)
$LD $alo,$BNSZ($ap)
$LD $tj,($sp)
$MULTU $aj,$bi
$LD $nj,($np)
$LD $nlo,$BNSZ($np)
mflo $lo0
mfhi $hi0
$ADDU $lo0,$tj
$MULTU $lo0,$n0
sltu $at,$lo0,$tj
$ADDU $hi0,$at
mflo $m1
$MULTU $alo,$bi
mflo $alo
mfhi $ahi
$MULTU $nj,$m1
mflo $lo1
mfhi $hi1
$MULTU $nlo,$m1
$ADDU $lo1,$lo0
sltu $at,$lo1,$lo0
$ADDU $hi1,$at
mflo $nlo
mfhi $nhi
move $tp,$sp
li $j,2*$BNSZ
$LD $tj,$BNSZ($tp)
.align 4
.Linner:
.set noreorder
$PTR_ADD $aj,$ap,$j
$PTR_ADD $nj,$np,$j
$LD $aj,($aj)
$LD $nj,($nj)
$MULTU $aj,$bi
$ADDU $lo0,$alo,$hi0
$ADDU $lo1,$nlo,$hi1
sltu $at,$lo0,$hi0
sltu $t0,$lo1,$hi1
$ADDU $hi0,$ahi,$at
$ADDU $hi1,$nhi,$t0
mflo $alo
mfhi $ahi
$ADDU $lo0,$tj
addu $j,$BNSZ
$MULTU $nj,$m1
sltu $at,$lo0,$tj
$ADDU $lo1,$lo0
$ADDU $hi0,$at
sltu $t0,$lo1,$lo0
$LD $tj,2*$BNSZ($tp)
$ADDU $hi1,$t0
sltu $at,$j,$num
mflo $nlo
mfhi $nhi
$ST $lo1,($tp)
bnez $at,.Linner
$PTR_ADD $tp,$BNSZ
.set reorder
$ADDU $lo0,$alo,$hi0
sltu $at,$lo0,$hi0
$ADDU $hi0,$ahi,$at
$ADDU $lo0,$tj
sltu $t0,$lo0,$tj
$ADDU $hi0,$t0
$LD $tj,2*$BNSZ($tp)
$ADDU $lo1,$nlo,$hi1
sltu $at,$lo1,$hi1
$ADDU $hi1,$nhi,$at
$ADDU $lo1,$lo0
sltu $t0,$lo1,$lo0
$ADDU $hi1,$t0
$ST $lo1,($tp)
$ADDU $lo1,$hi1,$hi0
sltu $hi1,$lo1,$hi0
$ADDU $lo1,$tj
sltu $at,$lo1,$tj
$ADDU $hi1,$at
$ST $lo1,$BNSZ($tp)
$ST $hi1,2*$BNSZ($tp)
addu $i,$BNSZ
sltu $t0,$i,$num
bnez $t0,.Louter
.set noreorder
$PTR_ADD $tj,$sp,$num # &tp[num]
move $tp,$sp
move $ap,$sp
li $hi0,0 # clear borrow bit
.align 4
.Lsub: $LD $lo0,($tp)
$LD $lo1,($np)
$PTR_ADD $tp,$BNSZ
$PTR_ADD $np,$BNSZ
$SUBU $lo1,$lo0,$lo1 # tp[i]-np[i]
sgtu $at,$lo1,$lo0
$SUBU $lo0,$lo1,$hi0
sgtu $hi0,$lo0,$lo1
$ST $lo0,($rp)
or $hi0,$at
sltu $at,$tp,$tj
bnez $at,.Lsub
$PTR_ADD $rp,$BNSZ
$SUBU $hi0,$hi1,$hi0 # handle upmost overflow bit
move $tp,$sp
$PTR_SUB $rp,$num # restore rp
not $hi1,$hi0
and $ap,$hi0,$sp
and $bp,$hi1,$rp
or $ap,$ap,$bp # ap=borrow?tp:rp
.align 4
.Lcopy: $LD $aj,($ap)
$PTR_ADD $ap,$BNSZ
$ST $zero,($tp)
$PTR_ADD $tp,$BNSZ
sltu $at,$tp,$tj
$ST $aj,($rp)
bnez $at,.Lcopy
$PTR_ADD $rp,$BNSZ
li $a0,1
li $t0,1
.set noreorder
move $sp,$fp
$REG_L $fp,($FRAMESIZE-1)*$SZREG($sp)
$REG_L $s11,($FRAMESIZE-2)*$SZREG($sp)
$REG_L $s10,($FRAMESIZE-3)*$SZREG($sp)
$REG_L $s9,($FRAMESIZE-4)*$SZREG($sp)
$REG_L $s8,($FRAMESIZE-5)*$SZREG($sp)
$REG_L $s7,($FRAMESIZE-6)*$SZREG($sp)
$REG_L $s6,($FRAMESIZE-7)*$SZREG($sp)
$REG_L $s5,($FRAMESIZE-8)*$SZREG($sp)
$REG_L $s4,($FRAMESIZE-9)*$SZREG($sp)
___
$code.=<<___ if ($flavour =~ /nubi/i);
$REG_L $s3,($FRAMESIZE-10)*$SZREG($sp)
$REG_L $s2,($FRAMESIZE-11)*$SZREG($sp)
$REG_L $s1,($FRAMESIZE-12)*$SZREG($sp)
$REG_L $s0,($FRAMESIZE-13)*$SZREG($sp)
___
$code.=<<___;
jr $ra
$PTR_ADD $sp,$FRAMESIZE*$SZREG
.end bn_mul_mont_internal
.rdata
.asciiz "Montgomery Multiplication for MIPS, CRYPTOGAMS by <appro\@openssl.org>"
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
close STDOUT;
crypto/sha/asm/sha1-mips.pl
浏览文件 @ 09854736
......@@ -14,12 +14,62 @@
# vectorized Xupdate on MIPSIII/IV, but the goal was to code MIPS32-
# compatible subroutine. There is room for minor optimization on
# little-endian platforms...
######################################################################
# There is a number of MIPS ABI in use, O32 and N32/64 are most
# widely used. Then there is a new contender: NUBI. It appears that if
# one picks the latter, it's possible to arrange code in ABI neutral
# manner. Therefore let's stick to NUBI register layout:
#
($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
#
# The return value is placed in $a0. Following coding rules facilitate
# interoperability:
#
# - never ever touch $tp, "thread pointer", former $gp;
# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
# old code];
# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
#
# For reference here is register layout for N32/64 MIPS ABIs:
#
# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
#
$flavour = shift; # supported flavours are o32,n32,64,nubi32,nubi64
if ($flavour =~ /64|n32/i) {
$PTR_ADD="dadd"; # incidentally works even on n32
$PTR_SUB="dsub"; # incidentally works even on n32
$REG_S="sd";
$REG_L="ld";
$PTR_SLL="dsll"; # incidentally works even on n32
$SZREG=8;
} else {
$PTR_ADD="add";
$PTR_SUB="sub";
$REG_S="sw";
$REG_L="lw";
$PTR_SLL="sll";
$SZREG=4;
}
$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0x00fff008 : 0x00ff0000;
#
# <appro@openssl.org>
#
# The code is somewhat IRIX-centric, i.e. is likely to require minor
# adaptations for other OSes...
######################################################################
for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/);
$big_endian=0 if (/\-DL_ENDIAN/);
$output=$_ if (/^\w[\w\-]*\.\w+$/); }
open STDOUT,">$output";
for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/);
$big_endian=0 if (/\-DL_ENDIAN/); }
if (!defined($big_endian))
{ $big_endian=(unpack('L',pack('N',1))==1); }
......@@ -37,9 +87,9 @@ $B="\$2";
$C="\$3";
$D="\$7";
$E="\$24"; @V=($A,$B,$C,$D,$E);
$t0="\$25"; # jp,t9
$t1="\$28"; # gp
$t2="\$30"; # fp,s8
$t0="\$25";
$t1=$num; # $num is offloaded to stack
$t2="\$30"; # fp
$K="\$31"; # ra
$FRAMESIZE=16;
......@@ -187,9 +237,6 @@ ___
}
$code=<<___;
#include <asm.h>
#include <regdef.h>
.text
.set noat
......@@ -198,22 +245,32 @@ $code=<<___;
.globl sha1_block_data_order
.ent sha1_block_data_order
sha1_block_data_order:
.frame sp,$FRAMESIZE*SZREG,zero
.mask 0xd0ff0000,-$FRAMESIZE*SZREG
.frame $sp,$FRAMESIZE*$SZREG,$ra
.mask 0xd0000000|$SAVED_REGS_MASK,-$SZREG
.set noreorder
PTR_SUB sp,$FRAMESIZE*SZREG
REG_S \$31,($FRAMESIZE-1)*SZREG(sp)
REG_S \$30,($FRAMESIZE-2)*SZREG(sp)
REG_S \$28,($FRAMESIZE-3)*SZREG(sp)
REG_S \$23,($FRAMESIZE-4)*SZREG(sp)
REG_S \$22,($FRAMESIZE-5)*SZREG(sp)
REG_S \$21,($FRAMESIZE-6)*SZREG(sp)
REG_S \$20,($FRAMESIZE-7)*SZREG(sp)
REG_S \$19,($FRAMESIZE-8)*SZREG(sp)
REG_S \$18,($FRAMESIZE-9)*SZREG(sp)
REG_S \$17,($FRAMESIZE-10)*SZREG(sp)
REG_S \$16,($FRAMESIZE-11)*SZREG(sp)
$PTR_SUB $sp,$FRAMESIZE*$SZREG
$REG_S $ra,($FRAMESIZE-1)*$SZREG($sp)
$REG_S $fp,($FRAMESIZE-2)*$SZREG($sp)
$REG_S $s11,($FRAMESIZE-3)*$SZREG($sp)
$REG_S $s10,($FRAMESIZE-4)*$SZREG($sp)
$REG_S $s9,($FRAMESIZE-5)*$SZREG($sp)
$REG_S $s8,($FRAMESIZE-6)*$SZREG($sp)
$REG_S $s7,($FRAMESIZE-7)*$SZREG($sp)
$REG_S $s6,($FRAMESIZE-8)*$SZREG($sp)
$REG_S $s5,($FRAMESIZE-9)*$SZREG($sp)
$REG_S $s4,($FRAMESIZE-10)*$SZREG($sp)
___
$code.=<<___ if ($flavour =~ /nubi/i);
$REG_S $s3,($FRAMESIZE-11)*$SZREG($sp)
$REG_S $s2,($FRAMESIZE-12)*$SZREG($sp)
$REG_S $s1,($FRAMESIZE-13)*$SZREG($sp)
$REG_S $s0,($FRAMESIZE-14)*$SZREG($sp)
$REG_S $gp,($FRAMESIZE-15)*$SZREG($sp)
___
$code.=<<___;
$PTR_SLL $num,6
$PTR_ADD $num,$inp
$REG_S $num,0($sp)
lw $A,0($ctx)
lw $B,4($ctx)
lw $C,8($ctx)
......@@ -246,6 +303,9 @@ $code.=<<___;
___
for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
$PTR_ADD $inp,64
$REG_L $num,0($sp)
addu $A,$X[0]
addu $B,$X[1]
sw $A,0($ctx)
......@@ -253,29 +313,38 @@ $code.=<<___;
addu $D,$X[3]
sw $B,4($ctx)
addu $E,$X[4]
PTR_SUB $num,1
sw $C,8($ctx)
sw $D,12($ctx)
sw $E,16($ctx)
.set noreorder
bnez $num,.Loop
PTR_ADD $inp,64
bne $inp,$num,.Loop
nop
.set noreorder
REG_L \$31,($FRAMESIZE-1)*SZREG(sp)
REG_L \$30,($FRAMESIZE-2)*SZREG(sp)
REG_L \$28,($FRAMESIZE-3)*SZREG(sp)
REG_L \$23,($FRAMESIZE-4)*SZREG(sp)
REG_L \$22,($FRAMESIZE-5)*SZREG(sp)
REG_L \$21,($FRAMESIZE-6)*SZREG(sp)
REG_L \$20,($FRAMESIZE-7)*SZREG(sp)
REG_L \$19,($FRAMESIZE-8)*SZREG(sp)
REG_L \$18,($FRAMESIZE-9)*SZREG(sp)
REG_L \$17,($FRAMESIZE-10)*SZREG(sp)
REG_L \$16,($FRAMESIZE-11)*SZREG(sp)
jr ra
PTR_ADD sp,$FRAMESIZE*SZREG
$REG_L $ra,($FRAMESIZE-1)*$SZREG($sp)
$REG_L $fp,($FRAMESIZE-2)*$SZREG($sp)
$REG_L $s11,($FRAMESIZE-3)*$SZREG($sp)
$REG_L $s10,($FRAMESIZE-4)*$SZREG($sp)
$REG_L $s9,($FRAMESIZE-5)*$SZREG($sp)
$REG_L $s8,($FRAMESIZE-6)*$SZREG($sp)
$REG_L $s7,($FRAMESIZE-7)*$SZREG($sp)
$REG_L $s6,($FRAMESIZE-8)*$SZREG($sp)
$REG_L $s5,($FRAMESIZE-9)*$SZREG($sp)
$REG_L $s4,($FRAMESIZE-10)*$SZREG($sp)
___
$code.=<<___ if ($flavour =~ /nubi/i);
$REG_L $s3,($FRAMESIZE-11)*$SZREG($sp)
$REG_L $s2,($FRAMESIZE-12)*$SZREG($sp)
$REG_L $s1,($FRAMESIZE-13)*$SZREG($sp)
$REG_L $s0,($FRAMESIZE-14)*$SZREG($sp)
$REG_L $gp,($FRAMESIZE-15)*$SZREG($sp)
___
$code.=<<___;
jr $ra
$PTR_ADD $sp,$FRAMESIZE*$SZREG
.end sha1_block_data_order
.rdata
.asciiz "SHA1 for MIPS, CRYPTOGAMS by <appro\@openssl.org>"
___
print $code;
close STDOUT;
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或