Skip to content

T
Third Party Openssl

OpenHarmony / Third Party Openssl
9 个月 前同步成功

通知 8
Star 18
Fork 1
T
Third Party Openssl

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 007c80ea 编写于 作者: R Richard Levitte
浏览文件
操作

Remove the remainder of util/mk1mf.pl and companion scripts 

This removes all scripts that deal with MINFO as well, since that's
only used by mk1mf.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
上级 0ef1ce49
展开全部 隐藏空白更改
内联 并排
Showing with 4 addition and 2296 deletion
CHANGES
浏览文件 @ 007c80ea
......@@ -4,6 +4,9 @@
Changes between 1.0.2g and 1.1.0 [xx XXX xxxx]
*) Removed the mk1mf build scripts.
[Richard Levitte]
*) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
it is always safe to #include a header now.
[Rich Salz]
......
Configure
浏览文件 @ 007c80ea
......@@ -1778,7 +1778,6 @@ print OUT "1;\n";
close(OUT);
print "IsMK1MF =", ($builder eq "mk1mf" ? "yes" : "no"), "\n";
print "CC =$target{cc}\n";
print "CFLAG =$target{cflags} $config{cflags}\n";
print "SHARED_CFLAG =$target{shared_cflag}\n";
......@@ -1870,11 +1869,6 @@ my %builders = (
run_dofile("util/domd", "util/domd.in");
chmod 0755, "util/domd";
},
mk1mf => sub {
my $platform = shift;
# The only reason we do this is to have something to build MINFO from
build_Makefile();
},
);
$builders{$builder}->($builder_platform, @builder_opts);
......
Makefile.in
浏览文件 @ 007c80ea
......@@ -465,19 +465,11 @@ clean: libclean
rm -f speed.* .pure
rm -f $(TARFILE)
makefile.one: files
$(PERL) util/mk1mf.pl >makefile.one; \
sh util/do_ms.sh
files:
$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
@set -e; target=files; $(RECURSIVE_BUILD_CMD)
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
test: files tests
test: tests
tests: build_tests
@(cd test && echo "testing..." && \
......
apps/Makefile.in
浏览文件 @ 007c80ea
......@@ -75,9 +75,6 @@ scripts: $(SCRIPTS)
openssl-vms.cnf: openssl.cnf
$(PERL) $(TOP)/VMS/VMSify-conf.pl < openssl.cnf > openssl-vms.cnf
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
install:
@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
@set -e; for i in $(EXE); \
......
crypto/Makefile.in
浏览文件 @ 007c80ea
......@@ -89,10 +89,6 @@ armv4cpuid.S: armv4cpuid.pl; $(PERL) armv4cpuid.pl $(PERLASM_SCHEME) $@
subdirs:
@target=all; $(RECURSIVE_MAKE)
files:
$(PERL) $(TOP)/util/files.pl "CPUID_OBJ=$(CPUID_OBJ)" Makefile >> $(TOP)/MINFO
@target=files; $(RECURSIVE_MAKE)
# lib: $(LIB): are splitted to avoid end-less loop
lib: $(LIB)
@touch lib
......
crypto/aes/Makefile.in
浏览文件 @ 007c80ea
......@@ -97,9 +97,6 @@ aes-armv4.o: aes-armv4.S
bsaes-%.S: asm/bsaes-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
bsaes-armv7.o: bsaes-armv7.S
files:
$(PERL) $(TOP)/util/files.pl "AES_ENC=$(AES_ENC)" Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/asn1/Makefile.in
浏览文件 @ 007c80ea
......@@ -68,9 +68,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/async/Makefile.in
浏览文件 @ 007c80ea
......@@ -36,9 +36,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
links:
@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
......
crypto/bf/Makefile.in
浏览文件 @ 007c80ea
......@@ -42,9 +42,6 @@ lib: $(LIBOBJ)
bf-586.s: asm/bf-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
$(PERL) asm/bf-586.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/bio/Makefile.in
浏览文件 @ 007c80ea
......@@ -46,9 +46,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/blake2/Makefile.in
浏览文件 @ 007c80ea
......@@ -30,9 +30,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
update: depend
depend:
......
crypto/bn/Makefile.in
浏览文件 @ 007c80ea
......@@ -130,9 +130,6 @@ armv4-mont.o: armv4-mont.S
armv4-gf2m.o: armv4-gf2m.S
armv8-mont.o: armv8-mont.S
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
div:
rm -f a.out
gcc -I.. -g div.c ../../libcrypto.a
......
crypto/buffer/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/camellia/Makefile.in
浏览文件 @ 007c80ea
......@@ -48,9 +48,6 @@ cmll-x86_64.s: asm/cmll-x86_64.pl
cmllt4-sparcv9.S: asm/cmllt4-sparcv9.pl ../perlasm/sparcv9_modes.pl
$(PERL) asm/cmllt4-sparcv9.pl $(PERLASM_SCHEME) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/cast/Makefile.in
浏览文件 @ 007c80ea
......@@ -42,9 +42,6 @@ lib: $(LIBOBJ)
cast-586.s: asm/cast-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
$(PERL) asm/cast-586.pl $(PERLASM_SCHEME) $(CLAGS) $(PROCESSOR) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/chacha/Makefile.in
浏览文件 @ 007c80ea
......@@ -48,9 +48,6 @@ chacha-%.S: asm/chacha-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
chacha-armv4.o: chacha-armv4.S
chacha-armv8.o: chacha-armv8.S
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/cmac/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/cms/Makefile.in
浏览文件 @ 007c80ea
......@@ -40,9 +40,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/comp/Makefile.in
浏览文件 @ 007c80ea
......@@ -37,9 +37,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(LIBSRC)
......
crypto/conf/Makefile.in
浏览文件 @ 007c80ea
......@@ -37,9 +37,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(LIBSRC)
......
crypto/ct/Makefile.in
浏览文件 @ 007c80ea
......@@ -36,9 +36,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/des/Makefile.in
浏览文件 @ 007c80ea
......@@ -63,9 +63,6 @@ des-586.s: asm/des-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
crypt586.s: asm/crypt586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
$(PERL) asm/crypt586.pl $(PERLASM_SCHEME) $(CFLAGS) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/dh/Makefile.in
浏览文件 @ 007c80ea
......@@ -36,9 +36,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/dsa/Makefile.in
浏览文件 @ 007c80ea
......@@ -36,9 +36,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/dso/Makefile.in
浏览文件 @ 007c80ea
......@@ -36,9 +36,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/ec/Makefile.in
浏览文件 @ 007c80ea
......@@ -64,9 +64,6 @@ ecp_nistz256-%.S: asm/ecp_nistz256-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
ecp_nistz256-armv4.o: ecp_nistz256-armv4.S
ecp_nistz256-armv8.o: ecp_nistz256-armv8.S
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/engine/Makefile.in
浏览文件 @ 007c80ea
......@@ -44,9 +44,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/err/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/evp/Makefile.in
浏览文件 @ 007c80ea
......@@ -59,9 +59,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(LIBSRC)
......
crypto/hmac/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/idea/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/kdf/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
tags:
ctags $(SRC)
......
crypto/lhash/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/md2/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/md4/Makefile.in
浏览文件 @ 007c80ea
......@@ -35,9 +35,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/md5/Makefile.in
浏览文件 @ 007c80ea
......@@ -52,9 +52,6 @@ md5-ia64.s: asm/md5-ia64.S
md5-sparcv9.S: asm/md5-sparcv9.pl
$(PERL) asm/md5-sparcv9.pl $(PERLASM_SCHEME) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/mdc2/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/modes/Makefile.in
浏览文件 @ 007c80ea
......@@ -67,9 +67,6 @@ ghash-%.S: asm/ghash-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
ghash-armv4.o: ghash-armv4.S
ghashv8-armx.o: ghashv8-armx.S
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/objects/Makefile.in
浏览文件 @ 007c80ea
......@@ -47,9 +47,6 @@ obj_xref.h: objxref.pl obj_xref.txt obj_mac.num
$(PERL) objxref.pl obj_mac.num obj_xref.txt > obj_xref.h
@sleep 1; touch obj_xref.h; sleep 1
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
generate: obj_dat.h ../../include/openssl/obj_mac.h obj_xref.h
depend:
......
crypto/ocsp/Makefile.in
浏览文件 @ 007c80ea
......@@ -37,9 +37,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(LIBSRC)
......
crypto/pem/Makefile.in
浏览文件 @ 007c80ea
......@@ -37,9 +37,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(LIBSRC)
......
crypto/pkcs12/Makefile.in
浏览文件 @ 007c80ea
......@@ -40,9 +40,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/pkcs7/Makefile.in
浏览文件 @ 007c80ea
......@@ -41,9 +41,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/poly1305/Makefile.in
浏览文件 @ 007c80ea
......@@ -52,9 +52,6 @@ poly1305-%.S: asm/poly1305-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
poly1305-armv4.o: poly1305-armv4.S
poly1305-armv8.o: poly1305-armv8.S
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/rand/Makefile.in
浏览文件 @ 007c80ea
......@@ -36,9 +36,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/rc2/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/rc4/Makefile.in
浏览文件 @ 007c80ea
......@@ -62,9 +62,6 @@ rc4-ia64.s: rc4-ia64.S
# GNU make "catch all"
rc4-%.s: asm/rc4-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/rc5/Makefile.in
浏览文件 @ 007c80ea
......@@ -42,9 +42,6 @@ lib: $(LIBOBJ)
rc5-586.s: asm/rc5-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
$(PERL) asm/rc5-586.pl $(PERLASM_SCHEME) $(CFLAGS) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/ripemd/Makefile.in
浏览文件 @ 007c80ea
......@@ -42,9 +42,6 @@ lib: $(LIBOBJ)
rmd-586.s: asm/rmd-586.pl ../perlasm/x86asm.pl
$(PERL) asm/rmd-586.pl $(PERLASM_SCHEME) $(CFLAGS) $@
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/rsa/Makefile.in
浏览文件 @ 007c80ea
......@@ -40,9 +40,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/seed/Makefile.in
浏览文件 @ 007c80ea
......@@ -35,9 +35,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/sha/Makefile.in
浏览文件 @ 007c80ea
......@@ -97,9 +97,6 @@ sha1-armv8.o: sha1-armv8.S
sha256-armv8.o: sha256-armv8.S
sha512-armv8.o: sha512-armv8.S
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/srp/Makefile.in
浏览文件 @ 007c80ea
......@@ -30,9 +30,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/stack/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/ts/Makefile.in
浏览文件 @ 007c80ea
......@@ -44,9 +44,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(LIBSRC)
......
crypto/txt_db/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/ui/Makefile.in
浏览文件 @ 007c80ea
......@@ -34,9 +34,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/whrlpool/Makefile.in
浏览文件 @ 007c80ea
......@@ -47,9 +47,6 @@ wp-x86_64.s: asm/wp-x86_64.pl
$(LIBOBJ): $(LIBSRC)
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/x509/Makefile.in
浏览文件 @ 007c80ea
......@@ -48,9 +48,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
crypto/x509v3/Makefile.in
浏览文件 @ 007c80ea
......@@ -44,9 +44,6 @@ lib: $(LIBOBJ)
$(RANLIB) $(LIB) || echo Never mind.
@touch lib
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
engines/Makefile.in
浏览文件 @ 007c80ea
......@@ -79,10 +79,6 @@ e_padlock-x86_64.s: asm/e_padlock-x86_64.pl
subdirs:
@target=all; $(RECURSIVE_MAKE)
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
@target=files; $(RECURSIVE_MAKE)
install:
@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
@if [ -n "$(SHARED_LIBS)" ]; then \
......
engines/afalg/Makefile.in
浏览文件 @ 007c80ea
......@@ -53,9 +53,6 @@ install:
depend:
@[ -z "$(THIS)" ] || $(TOP)/util/domd $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC) $(TESTLIBSRC)
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
clean:
rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff *.so *.dll *.dylib
......
ssl/Makefile.in
浏览文件 @ 007c80ea
......@@ -68,9 +68,6 @@ shared: lib
(cd ..; $(MAKE) $(SHARED_LIB)); \
fi
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
depend:
$(TOP)/util/domd $(CFLAG) $(INCLUDES) -- $(PROGS) $(LIBSRC)
......
test/Makefile.in
浏览文件 @ 007c80ea
......@@ -152,9 +152,6 @@ all: exe
exe: $(EXE) dummytest$(EXE_EXT)
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
generate: $(SRC)
$(SRC):
@sh $(TOP)/util/point.sh dummytest.c $@
......
tools/Makefile.in
浏览文件 @ 007c80ea
......@@ -46,9 +46,6 @@ uninstall:
$(RM) $(DESTDIR)$(OPENSSLDIR)/misc/$$i; \
done;
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
errors:
depend:
......
util/files.pl 已删除 100755 → 0
浏览文件 @ 0ef1ce49
#!/usr/local/bin/perl
#
# used to generate the file MINFO for use by util/mk1mf.pl
# It is basically a list of all variables from the passed makefile
#
while ($ARGV[0] =~ /^([^\s=]+)\s*=\s*(.*)$/)
{
$sym{$1} = $2;
shift;
}
$s="";
while (<>)
{
s|\R$||;
s/#.*//;
if (/^([^\s=]+)\s*=\s*(.*)$/)
{
$o="";
($s,$b)=($1,$2);
for (;;)
{
if ($b =~ /\\$/)
{
$b=$`; # Keep what is before the backslash
$o.=$b." ";
$b = "" unless defined($b = <>);
$b =~ s{\R$}{};
}
else
{
$o.=$b." ";
last;
}
}
$o =~ s/^\s+//;
$o =~ s/\s+$//;
$o =~ s/\s+/ /g;
$o =~ s/\$[({]([^)}]+)[)}]/$sym{$1}/g;
$sym{$s}=$o if !exists $sym{$s};
}
}
($pwd=`pwd`) =~ s{\R$}{};
if ($sym{'TOP'} eq ".")
{
$n=0;
$dir=".";
}
else {
$n=split(/\//,$sym{'TOP'});
@_=split(/\//,$pwd);
$z=$#_-$n+1;
foreach $i ($z .. $#_) { $dir.=$_[$i]."/"; }
chop($dir); # Remove the last slash
}
print "RELATIVE_DIRECTORY=$dir\n";
foreach (sort keys %sym)
{
print "$_=$sym{$_}\n";
}
print "RELATIVE_DIRECTORY=\n";
util/mk1mf.pl 已删除 100755 → 0
浏览文件 @ 0ef1ce49
此差异已折叠。
util/mkfiles.pl 已删除 100755 → 0
浏览文件 @ 0ef1ce49
#!/usr/local/bin/perl
#
# This is a hacked version of files.pl for systems that can't do a 'make files'.
# Do a perl util/mkminfo.pl >MINFO to build MINFO
# Written by Steve Henson 1999.
# List of directories to process
my @dirs = (
".",
"crypto",
"crypto/md2",
"crypto/md4",
"crypto/md5",
"crypto/sha",
"crypto/mdc2",
"crypto/hmac",
"crypto/ripemd",
"crypto/des",
"crypto/rc2",
"crypto/rc4",
"crypto/rc5",
"crypto/idea",
"crypto/bf",
"crypto/cast",
"crypto/aes",
"crypto/camellia",
"crypto/seed",
"crypto/modes",
"crypto/cmac",
"crypto/bn",
"crypto/rsa",
"crypto/dsa",
"crypto/dso",
"crypto/dh",
"crypto/ec",
"crypto/buffer",
"crypto/bio",
"crypto/stack",
"crypto/lhash",
"crypto/rand",
"crypto/err",
"crypto/objects",
"crypto/evp",
"crypto/asn1",
"crypto/pem",
"crypto/x509",
"crypto/x509v3",
"crypto/cms",
"crypto/conf",
"crypto/txt_db",
"crypto/pkcs7",
"crypto/pkcs12",
"crypto/comp",
"crypto/engine",
"crypto/ocsp",
"crypto/ui",
#"crypto/store",
"crypto/whrlpool",
"crypto/ts",
"crypto/srp",
"crypto/ct",
"crypto/async",
"crypto/chacha",
"crypto/poly1305",
"crypto/blake2",
"crypto/kdf",
"ssl",
"apps",
"engines",
"test",
"tools"
);
%top;
my $fipscanisteronly = 0;
foreach (@dirs) {
next if ($fipscanisteronly && !(-d $_));
&files_dir ($_, "Makefile");
}
exit(0);
sub files_dir
{
my ($dir, $makefile) = @_;
my %sym;
open (IN, "$dir/$makefile") || die "Can't open $dir/$makefile";
my $s="";
while (<IN>)
{
s|\R$||;
s/#.*//;
if (/^([^\s=]+)\s*=\s*(.*)$/)
{
$o="";
($s,$b)=($1,$2);
for (;;)
{
if ($b =~ /\\$/)
{
$b=$`;
$o.=$b." ";
$b = "" unless defined($b = <IN>);
$b =~ s{\R$}{};
}
else
{
$o.=$b." ";
last;
}
}
$o =~ s/^\s+//;
$o =~ s/\s+$//;
$o =~ s/\s+/ /g;
$o =~ s/\$[({]([^)}]+)[)}]/$top{$1} or $sym{$1}/ge;
$sym{$s}=($top{$s} or $o);
}
}
print "RELATIVE_DIRECTORY=$dir\n";
foreach (sort keys %sym)
{
print "$_=$sym{$_}\n";
}
if ($dir eq "." && defined($sym{"BUILDENV"}))
{
foreach (split(' ',$sym{"BUILDENV"}))
{
/^(.+)=/;
$top{$1}=$sym{$1};
}
}
print "RELATIVE_DIRECTORY=\n";
close (IN);
if ($dir eq "." && $sym{FIPSCANISTERONLY} eq "y")
{
$fipscanisteronly = 1;
}
}
util/pl/Mingw32.pl 已删除 100644 → 0
浏览文件 @ 0ef1ce49
#!/usr/local/bin/perl
#
# Mingw32.pl -- Mingw
#
$o='/';
$cp='cp';
$rm='rm -f';
$mkdir='gmkdir';
$o='\\';
$cp='copy';
$rm='del';
$mkdir='mkdir';
# C compiler stuff
$cc='gcc';
if ($debug)
{ $cflags="-DL_ENDIAN -DDSO_WIN32 -g2 -ggdb"; }
else
{ $cflags="-DL_ENDIAN -DDSO_WIN32 -fomit-frame-pointer -O3 -mcpu=i486 -Wall"; }
if ($gaswin and !$no_asm)
{
$bn_asm_obj='$(OBJ_D)\bn-win32.o';
$bn_asm_src='crypto/bn/asm/bn-win32.s';
$bnco_asm_obj='$(OBJ_D)\co-win32.o';
$bnco_asm_src='crypto/bn/asm/co-win32.s';
$des_enc_obj='$(OBJ_D)\d-win32.o $(OBJ_D)\y-win32.o';
$des_enc_src='crypto/des/asm/d-win32.s crypto/des/asm/y-win32.s';
$bf_enc_obj='$(OBJ_D)\b-win32.o';
$bf_enc_src='crypto/bf/asm/b-win32.s';
# $cast_enc_obj='$(OBJ_D)\c-win32.o';
# $cast_enc_src='crypto/cast/asm/c-win32.s';
$rc4_enc_obj='$(OBJ_D)\r4-win32.o';
$rc4_enc_src='crypto/rc4/asm/r4-win32.s';
$rc5_enc_obj='$(OBJ_D)\r5-win32.o';
$rc5_enc_src='crypto/rc5/asm/r5-win32.s';
$md5_asm_obj='$(OBJ_D)\m5-win32.o';
$md5_asm_src='crypto/md5/asm/m5-win32.s';
$rmd160_asm_obj='$(OBJ_D)\rm-win32.o';
$rmd160_asm_src='crypto/ripemd/asm/rm-win32.s';
$sha1_asm_obj='$(OBJ_D)\s1-win32.o';
$sha1_asm_src='crypto/sha/asm/s1-win32.s';
$cflags.=" -DBN_ASM -DMD5_ASM -DSHA1_ASM -DOPENSSL_BN_ASM_PART_WORDS";
}
$obj='.o';
$ofile='-o ';
# EXE linking stuff
$link='${CC}';
$lflags='${CFLAGS}';
$efile='-o ';
$exep='';
$ex_libs="-lws2_32 -lgdi32";
# static library stuff
$mklib='ar r';
$mlflags='';
$ranlib='ranlib';
$plib='lib';
$libp=".a";
$shlibp=".a";
$lfile='';
$asm='as';
$afile='-o ';
#$bn_asm_obj="";
#$bn_asm_src="";
#$des_enc_obj="";
#$des_enc_src="";
#$bf_enc_obj="";
#$bf_enc_src="";
sub do_lib_rule
{
local($obj,$target,$name,$shlib)=@_;
local($ret,$_,$Name);
$target =~ s/\//$o/g if $o ne '/';
$target="$target";
($Name=$name) =~ tr/a-z/A-Z/;
$ret.="$target: \$(${Name}OBJ)\n";
$ret.="\tif exist $target \$(RM) $target\n";
$ret.="\t\$(MKLIB) $target \$(${Name}OBJ)\n";
$ret.="\t\$(RANLIB) $target\n\n";
}
sub do_link_rule
{
local($target,$files,$dep_libs,$libs)=@_;
local($ret,$_);
$file =~ s/\//$o/g if $o ne '/';
$n=&bname($target);
$ret.="$target: $files $dep_libs\n";
$ret.="\t\$(LINK_CMD) ${efile}$target \$(LFLAGS) $files $libs\n\n";
return($ret);
}
1;
util/pl/linux.pl 已删除 100644 → 0
浏览文件 @ 0ef1ce49
#!/usr/local/bin/perl
#
# linux.pl - the standard unix makefile stuff.
#
$o='/';
$cp='/bin/cp';
$rm='/bin/rm -f';
# C compiler stuff
$cc='gcc';
if ($debug)
{ $cflags="-g2 -ggdb -DREF_DEBUG"; }
elsif ($profile)
{ $cflags="-pg -O3"; }
else
{ $cflags="-O3 -fomit-frame-pointer"; }
if (!$no_asm)
{
$bn_asm_obj='$(OBJ_D)/bn86-elf.o';
$bn_asm_src='crypto/bn/asm/bn86unix.cpp';
$bnco_asm_obj='$(OBJ_D)/co86-elf.o';
$bnco_asm_src='crypto/bn/asm/co86unix.cpp';
$des_enc_obj='$(OBJ_D)/dx86-elf.o $(OBJ_D)/yx86-elf.o';
$des_enc_src='crypto/des/asm/dx86unix.cpp crypto/des/asm/yx86unix.cpp';
$bf_enc_obj='$(OBJ_D)/bx86-elf.o';
$bf_enc_src='crypto/bf/asm/bx86unix.cpp';
$cast_enc_obj='$(OBJ_D)/cx86-elf.o';
$cast_enc_src='crypto/cast/asm/cx86unix.cpp';
$rc4_enc_obj='$(OBJ_D)/rx86-elf.o';
$rc4_enc_src='crypto/rc4/asm/rx86unix.cpp';
$rc5_enc_obj='$(OBJ_D)/r586-elf.o';
$rc5_enc_src='crypto/rc5/asm/r586unix.cpp';
$md5_asm_obj='$(OBJ_D)/mx86-elf.o';
$md5_asm_src='crypto/md5/asm/mx86unix.cpp';
$rmd160_asm_obj='$(OBJ_D)/rm86-elf.o';
$rmd160_asm_src='crypto/ripemd/asm/rm86unix.cpp';
$sha1_asm_obj='$(OBJ_D)/sx86-elf.o';
$sha1_asm_src='crypto/sha/asm/sx86unix.cpp';
$cflags.=" -DBN_ASM -DMD5_ASM -DSHA1_ASM -DOPENSSL_BN_ASM_PART_WORDS";
}
$cflags.=" -DTERMIO -DL_ENDIAN -m486 -Wall";
if ($shlib)
{
$shl_cflag=" -DPIC -fpic";
$shlibp=".so.$ssl_version";
$so_shlibp=".so";
}
sub do_shlib_rule
{
local($obj,$target,$name,$shlib,$so_name)=@_;
local($ret,$_,$Name);
$target =~ s/\//$o/g if $o ne '/';
($Name=$name) =~ tr/a-z/A-Z/;
$ret.="$target: \$(${Name}OBJ)\n";
$ret.="\t\$(RM) target\n";
$ret.="\tgcc \${CFLAGS} -shared -Wl,-soname,$target -o $target \$(${Name}OBJ)\n";
($t=$target) =~ s/(^.*)\/[^\/]*$/$1/;
if ($so_name ne "")
{
$ret.="\t\$(RM) \$(LIB_D)$o$so_name\n";
$ret.="\tln -s $target \$(LIB_D)$o$so_name\n\n";
}
}
sub do_link_rule
{
local($target,$files,$dep_libs,$libs)=@_;
local($ret,$_);
$file =~ s/\//$o/g if $o ne '/';
$n=&bname($target);
$ret.="$target: $files $dep_libs\n";
$ret.="\t\$(LINK_CMD) ${efile}$target \$(LFLAGS) $files $libs\n\n";
return($ret);
}
sub do_asm_rule
{
local($target,$src)=@_;
local($ret,@s,@t,$i);
$target =~ s/\//$o/g if $o ne "/";
$src =~ s/\//$o/g if $o ne "/";
@s=split(/\s+/,$src);
@t=split(/\s+/,$target);
for ($i=0; $i<=$#s; $i++)
{
$ret.="$t[$i]: $s[$i]\n";
$ret.="\tgcc -E -DELF \$(SRC_D)$o$s[$i]|\$(AS) $afile$t[$i]\n\n";
}
return($ret);
}
1;
util/pl/unix.pl 已删除 100644 → 0
浏览文件 @ 0ef1ce49
#!/usr/local/bin/perl
#
# unix.pl - the standard unix makefile stuff.
#
$o='/';
$cp='/bin/cp';
$rm='/bin/rm -f';
# C compiler stuff
if ($gcc)
{
$cc='gcc';
if ($debug)
{ $cflags="-g2 -ggdb"; }
else
{ $cflags="-O3 -fomit-frame-pointer"; }
}
else
{
$cc='cc';
if ($debug)
{ $cflags="-g"; }
else
{ $cflags="-O"; }
}
$obj='.o';
$asm_suffix='.s';
$ofile='-o ';
# EXE linking stuff
$link='${CC}';
$lflags='${CFLAG}';
$efile='-o ';
$exep='';
$ex_libs="";
# static library stuff
$mklib='ar r';
$mlflags='';
$ranlib=&which("ranlib") or $ranlib="true";
$plib='lib';
$libp=".a";
$shlibp=".a";
$lfile='';
$asm='as';
$afile='-o ';
$bn_asm_obj="";
$bn_asm_src="";
$des_enc_obj="";
$des_enc_src="";
$bf_enc_obj="";
$bf_enc_src="";
%perl1 = (
'md5-x86_64' => 'crypto/md5',
'x86_64-mont' => 'crypto/bn',
'x86_64-mont5' => 'crypto/bn',
'x86_64-gf2m' => 'crypto/bn',
'aes-x86_64' => 'crypto/aes',
'vpaes-x86_64' => 'crypto/aes',
'bsaes-x86_64' => 'crypto/aes',
'aesni-x86_64' => 'crypto/aes',
'aesni-sha1-x86_64' => 'crypto/aes',
'sha1-x86_64' => 'crypto/sha',
'e_padlock-x86_64' => 'engines',
'rc4-x86_64' => 'crypto/rc4',
'rc4-md5-x86_64' => 'crypto/rc4',
'ghash-x86_64' => 'crypto/modes',
'aesni-gcm-x86_64' => 'crypto/modes',
'aesni-sha256-x86_64' => 'crypto/aes',
'rsaz-x86_64' => 'crypto/bn',
'rsaz-avx2' => 'crypto/bn',
'aesni-mb-x86_64' => 'crypto/aes',
'sha1-mb-x86_64' => 'crypto/sha',
'sha256-mb-x86_64' => 'crypto/sha',
'ecp_nistz256-x86_64' => 'crypto/ec',
'wp-x86_64' => 'crypto/whrlpool',
'cmll-x86_64' => 'crypto/camellia',
);
# If I were feeling more clever, these could probably be extracted
# from makefiles.
sub platform_perlasm_compile_target
{
local($target, $source, $bname) = @_;
for $p (keys %perl1)
{
# FIXME: export CC so rsaz-avx2 can test for it, since BSD make does
# not export variables, unlike GNU make. But this also requires fixing
# the .s.o rule to use CC!
if ($target eq "\$(OBJ_D)/$p.o")
{
return << "EOF";
\$(TMP_D)/$p.s: $perl1{$p}/asm/$p.pl
\$(PERL) $perl1{$p}/asm/$p.pl \$(PERLASM_SCHEME) \$@
EOF
}
}
if ($target eq '$(OBJ_D)/x86_64cpuid.o')
{
return << 'EOF';
$(TMP_D)/x86_64cpuid.s: crypto/x86_64cpuid.pl
$(PERL) crypto/x86_64cpuid.pl $(PERLASM_SCHEME) $@
EOF
}
elsif ($target eq '$(OBJ_D)/sha256-x86_64.o')
{
return << 'EOF';
$(TMP_D)/sha256-x86_64.s: crypto/sha/asm/sha512-x86_64.pl
$(PERL) crypto/sha/asm/sha512-x86_64.pl $(PERLASM_SCHEME) $@
EOF
}
elsif ($target eq '$(OBJ_D)/sha512-x86_64.o')
{
return << 'EOF';
$(TMP_D)/sha512-x86_64.s: crypto/sha/asm/sha512-x86_64.pl
$(PERL) crypto/sha/asm/sha512-x86_64.pl $(PERLASM_SCHEME) $@
EOF
}
elsif ($target eq '$(OBJ_D)/sha512-x86_64.o')
{
return << 'EOF';
$(TMP_D)/sha512-x86_64.s: crypto/sha/asm/sha512-x86_64.pl
$(PERL) crypto/sha/asm/sha512-x86_64.pl $(PERLASM_SCHEME) $@
EOF
}
die $target;
}
sub special_compile_target
{
local($target) = @_;
if ($target eq 'crypto/bn/x86_64-gcc')
{
return << "EOF";
\$(TMP_D)/x86_64-gcc.o: crypto/bn/asm/x86_64-gcc.c
\$(CC) \$(LIB_CFLAGS) -c -o \$@ crypto/bn/asm/x86_64-gcc.c
EOF
}
return undef;
}
sub do_lib_rule
{
local($obj,$target,$name,$shlib)=@_;
local($ret,$_,$Name);
$target =~ s/\//$o/g if $o ne '/';
$target="$target";
($Name=$name) =~ tr/a-z/A-Z/;
$ret.="$target: \$(${Name}OBJ)\n";
$ret.="\t\$(RM) $target\n";
$ret.="\t\$(MKLIB) $target \$(${Name}OBJ)\n";
$ret.="\t\$(RANLIB) $target\n\n";
}
sub do_link_rule
{
local($target,$files,$dep_libs,$libs)=@_;
local($ret,$_);
$file =~ s/\//$o/g if $o ne '/';
$n=&bname($target);
$ret.="$target: $files $dep_libs\n";
$ret.="\t\$(LINK_CMD) ${efile}$target \$(LFLAGS) $files $libs\n\n";
return($ret);
}
sub which
{
my ($name)=@_;
my $path;
foreach $path (split /:/, $ENV{PATH})
{
if (-x "$path/$name")
{
return "$path/$name";
}
}
}
sub do_rehash_rule {
my ($target, $deps) = @_;
my $ret = <<"EOF";
$target: $deps
touch $target
EOF
return $ret
}
sub do_test_rule {
my ($target, $deps, $test_cmd) = @_;
my $ret = <<"EOF";
$target: $deps force.$target
TOP=. BIN_D=\$(BIN_D) TEST_D=\$(TEST_D) OPENSSL_ENGINES=$(ENG_D) \\
PERL=\$(PERL) \$(PERL) test/$test_cmd \$(TESTS)
force.$target:
EOF
return $ret;
}
1;
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或