80-test_ssl.t 29.9 KB
Newer Older
1 2 3 4 5 6 7 8
#! /usr/bin/perl

use strict;
use warnings;

use POSIX;
use File::Spec;
use File::Copy;
9
use OpenSSL::Test qw/:DEFAULT with top_file cmdstr/;
10
use OpenSSL::Test::Utils;
11 12 13

setup("test_ssl");

14 15 16
my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
    $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
    $no_dtls, $no_dtls1, $no_dtls1_2) =
17 18 19 20 21
    anydisabled qw/rsa dsa dh ec srp psk
                   ssl3 tls1 tls1_1 tls1_2
                   dtls dtls1 dtls1_2/;
my $no_anytls = alldisabled(available_protocols("tls"));
my $no_anydtls = alldisabled(available_protocols("dtls"));
22 23 24

plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
    if $no_anytls && $no_anydtls;
25

26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
my $digest = "-sha1";
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
my $dummycnf = top_file("apps", "openssl.cnf");

my $CAkey = "keyCA.ss";
my $CAcert="certCA.ss";
my $CAserial="certCA.srl";
my $CAreq="reqCA.ss";
my $CAconf=top_file("test","CAss.cnf");
my $CAreq2="req2CA.ss";	# temp

my $Uconf=top_file("test","Uss.cnf");
my $Ukey="keyU.ss";
my $Ureq="reqU.ss";
my $Ucert="certU.ss";

44 45 46 47 48 49 50 51
my $Dkey="keyD.ss";
my $Dreq="reqD.ss";
my $Dcert="certD.ss";

my $Ekey="keyE.ss";
my $Ereq="reqE.ss";
my $Ecert="certE.ss";

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
my $P1conf=top_file("test","P1ss.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
my $P1cert="certP1.ss";
my $P1intermediate="tmp_intP1.ss";

my $P2conf=top_file("test","P2ss.cnf");
my $P2key="keyP2.ss";
my $P2req="reqP2.ss";
my $P2cert="certP2.ss";
my $P2intermediate="tmp_intP2.ss";

plan tests =>
    1				# For testss
    + 1				# For ssltest -test_cipherlist
67
    + 10			# For the first testssl
R
Richard Levitte 已提交
68 69
    + 16			# For the first testsslproxy
    + 16			# For the second testsslproxy
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93
    ;

subtest 'test_ss' => sub {
    if (testss()) {
	open OUT, ">", "intP1.ss";
	copy($CAcert, \*OUT); copy($Ucert, \*OUT);
	close OUT;

	open OUT, ">", "intP2.ss";
	copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
	close OUT;
    }
};

my $check = ok(run(test(["ssltest","-test_cipherlist"])), "running ssltest");

  SKIP: {
      skip "ssltest ended with error, skipping the rest", 3
	  if !$check;

      note('test_ssl -- key U');
      testssl("keyU.ss", $Ucert, $CAcert);

      note('test_ssl -- key P1');
R
Richard Levitte 已提交
94
      testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
95 96

      note('test_ssl -- key P2');
R
Richard Levitte 已提交
97
      testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
98 99 100 101 102 103 104 105 106
    }

# -----------
# subtest functions
sub testss {
    open RND, ">>", ".rnd";
    print RND "string to make the random number generator think it has entropy";
    close RND;

107 108
    my @req_dsa = ("-newkey",
                   "dsa:".File::Spec->catfile("..", "apps", "dsa1024.pem"));;
109
    my @req_new;
110
    if ($no_rsa) {
111
	@req_new = @req_dsa;
112 113 114 115
    } else {
	@req_new = ("-new");
    }

116
    plan tests => 17;
117 118

  SKIP: {
119
      skip 'failure', 16 unless
120 121 122 123 124
	  ok(run(app([@reqcmd, "-config", $CAconf,
		      "-out", $CAreq, "-keyout", $CAkey,
		      @req_new])),
	     'make cert request');

125
      skip 'failure', 15 unless
126 127 128 129 130 131
	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
		      "-req", "-out", $CAcert, "-signkey", $CAkey,
		      "-extfile", $CAconf, "-extensions", "v3_ca"],
		     stdout => "err.ss")),
	     'convert request into self-signed cert');

132
      skip 'failure', 14 unless
133 134 135 136 137
	  ok(run(app([@x509cmd, "-in", $CAcert,
		      "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
		     stdout => "err.ss")),
	     'convert cert into a cert request');

138
      skip 'failure', 13 unless
139 140 141 142 143
	  ok(run(app([@reqcmd, "-config", $dummycnf,
		      "-verify", "-in", $CAreq, "-noout"])),
	     'verify request 1');


144
      skip 'failure', 12 unless
145 146 147 148
	  ok(run(app([@reqcmd, "-config", $dummycnf,
		      "-verify", "-in", $CAreq2, "-noout"])),
	     'verify request 2');

149
      skip 'failure', 11 unless
150 151 152
	  ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
	     'verify signature');

153
      skip 'failure', 10 unless
154 155 156 157 158
	  ok(run(app([@reqcmd, "-config", $Uconf,
		      "-out", $Ureq, "-keyout", $Ukey, @req_new],
		     stdout => "err.ss")),
	     'make a user cert request');

159
      skip 'failure', 9 unless
160 161 162 163 164 165 166 167
	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
		      "-req", "-out", $Ucert,
		      "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
		      "-extfile", $Uconf, "-extensions", "v3_ee"],
		     stdout => "err.ss"))
	     && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
	     'sign user cert request');

168
      skip 'failure', 8 unless
169 170 171 172 173
	  ok(run(app([@x509cmd,
		      "-subject", "-issuer", "-startdate", "-enddate",
		      "-noout", "-in", $Ucert])),
	     'Certificate details');

174 175 176
      skip 'failure', 7 unless
          subtest 'DSA certificate creation' => sub {
              plan skip_all => "skipping DSA certificate creation"
177
                  if $no_dsa;
178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215

              plan tests => 4;

            SKIP: {
                $ENV{CN2} = "DSA Certificate";
                skip 'failure', 3 unless
                    ok(run(app([@reqcmd, "-config", $Uconf,
                                "-out", $Dreq, "-keyout", $Dkey,
                                @req_dsa],
                               stdout => "err.ss")),
                       "make a DSA user cert request");
                skip 'failure', 2 unless
                    ok(run(app([@x509cmd, "-CAcreateserial",
                                "-in", $Dreq,
                                "-days", "30",
                                "-req",
                                "-out", $Dcert,
                                "-CA", $CAcert, "-CAkey", $CAkey,
                                "-CAserial", $CAserial,
                                "-extfile", $Uconf,
                                "-extensions", "v3_ee_dsa"],
                               stdout => "err.ss")),
                       "sign DSA user cert request");
                skip 'failure', 1 unless
                    ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
                       "verify DSA user cert");
                skip 'failure', 0 unless
                    ok(run(app([@x509cmd,
                                "-subject", "-issuer",
                                "-startdate", "-enddate", "-noout",
                                "-in", $Dcert])),
                       "DSA Certificate details");
              }
      };

      skip 'failure', 6 unless
          subtest 'ECDSA/ECDH certificate creation' => sub {
              plan skip_all => "skipping ECDSA/ECDH certificate creation"
216
                  if $no_ec;
217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254

              plan tests => 5;

            SKIP: {
                $ENV{CN2} = "ECDSA Certificate";
                skip 'failure', 4 unless
                    ok(run(app(["openssl", "ecparam", "-name", "P-256",
                                "-out", "ecp.ss"])),
                       "make EC parameters");
                skip 'failure', 3 unless
                    ok(run(app([@reqcmd, "-config", $Uconf,
                                "-out", $Ereq, "-keyout", $Ekey,
                                "-newkey", "ec:ecp.ss"],
                               stdout => "err.ss")),
                       "make a ECDSA/ECDH user cert request");
                skip 'failure', 2 unless
                    ok(run(app([@x509cmd, "-CAcreateserial",
                                "-in", $Ereq,
                                "-days", "30",
                                "-req",
                                "-out", $Ecert,
                                "-CA", $CAcert, "-CAkey", $CAkey,
                                "-CAserial", $CAserial,
                                "-extfile", $Uconf,
                                "-extensions", "v3_ee_ec"],
                               stdout => "err.ss")),
                       "sign ECDSA/ECDH user cert request");
                skip 'failure', 1 unless
                    ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
                       "verify ECDSA/ECDH user cert");
                skip 'failure', 0 unless
                    ok(run(app([@x509cmd,
                                "-subject", "-issuer",
                                "-startdate", "-enddate", "-noout",
                                "-in", $Ecert])),
                       "ECDSA Certificate details");
              }
      };
255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315

      skip 'failure', 5 unless
	  ok(run(app([@reqcmd, "-config", $P1conf,
		      "-out", $P1req, "-keyout", $P1key, @req_new],
		     stdout => "err.ss")),
	     'make a proxy cert request');


      skip 'failure', 4 unless
	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
		      "-req", "-out", $P1cert,
		      "-CA", $Ucert, "-CAkey", $Ukey,
		      "-extfile", $P1conf, "-extensions", "v3_proxy"],
		     stdout => "err.ss")),
	     'sign proxy with user cert');

      copy($Ucert, $P1intermediate);
      run(app([@verifycmd, "-CAfile", $CAcert,
	       "-untrusted", $P1intermediate, $P1cert]));
      ok(run(app([@x509cmd,
		  "-subject", "-issuer", "-startdate", "-enddate",
		  "-noout", "-in", $P1cert])),
	 'Certificate details');

      skip 'failure', 2 unless
	  ok(run(app([@reqcmd, "-config", $P2conf,
		      "-out", $P2req, "-keyout", $P2key,
		      @req_new],
		     stdout => "err.ss")),
	     'make another proxy cert request');


      skip 'failure', 1 unless
	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
		      "-req", "-out", $P2cert,
		      "-CA", $P1cert, "-CAkey", $P1key,
		      "-extfile", $P2conf, "-extensions", "v3_proxy"],
		     stdout => "err.ss")),
	     'sign second proxy cert request with the first proxy cert');


      open OUT, ">", $P2intermediate;
      copy($Ucert, \*OUT); copy($P1cert, \*OUT);
      close OUT;
      run(app([@verifycmd, "-CAfile", $CAcert,
	       "-untrusted", $P2intermediate, $P2cert]));
      ok(run(app([@x509cmd,
		  "-subject", "-issuer", "-startdate", "-enddate",
		  "-noout", "-in", $P2cert])),
	 'Certificate details');
    }
}

sub testssl {
    my $key = shift || top_file("apps","server.pem");
    my $cert = shift || top_file("apps","server.pem");
    my $CAtmp = shift;
    my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
    my @extra = @_;

    my @ssltest = ("ssltest",
316
		   "-s_key", $key, "-s_cert", $cert,
317 318 319 320 321 322 323 324 325 326 327
		   "-c_key", $key, "-c_cert", $cert);

    my $serverinfo = top_file("test","serverinfo.pem");

    my $dsa_cert = 0;
    if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
					"-text", "-noout"]), capture => 1)) {
	$dsa_cert = 1;
    }


328
    # plan tests => 10;
329 330 331 332 333

    subtest 'standard SSL tests' => sub {
	######################################################################
	plan tests => 27;

334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390
      SKIP: {
	  skip "SSLv3 is not supported by this OpenSSL build", 4
	      if disabled("ssl3");

	  ok(run(test([@ssltest, "-ssl3", @extra])),
	     'test sslv3');
	  ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
	     'test sslv3 with server authentication');
	  ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
	     'test sslv3 with client authentication');
	  ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
	     'test sslv3 with both server and client authentication');
	}

      SKIP: {
	  skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
	      if $no_anytls;

	  ok(run(test([@ssltest, @extra])),
	     'test sslv2/sslv3');
	  ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
	     'test sslv2/sslv3 with server authentication');
	  ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
	     'test sslv2/sslv3 with client authentication');
	  ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
	     'test sslv2/sslv3 with both server and client authentication');
	}

      SKIP: {
	  skip "SSLv3 is not supported by this OpenSSL build", 4
	      if disabled("ssl3");

	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
	     'test sslv3 via BIO pair');
	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
	     'test sslv3 with server authentication via BIO pair');
	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
	     'test sslv3 with client authentication via BIO pair');
	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
	     'test sslv3 with both server and client authentication via BIO pair');
	}

      SKIP: {
	  skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
	      if $no_anytls;

	  ok(run(test([@ssltest, "-bio_pair", @extra])),
	     'test sslv2/sslv3 via BIO pair');
	}

      SKIP: {
	  skip "DTLSv1 is not supported by this OpenSSL build", 4
	      if disabled("dtls1");

	  ok(run(test([@ssltest, "-dtls1", @extra])),
	     'test dtlsv1');
	  ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
391
	   'test dtlsv1 with server authentication');
392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432
	  ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
	     'test dtlsv1 with client authentication');
	  ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
	     'test dtlsv1 with both server and client authentication');
	}

      SKIP: {
	  skip "DTLSv1.2 is not supported by this OpenSSL build", 4
	      if disabled("dtls1_2");

	  ok(run(test([@ssltest, "-dtls12", @extra])),
	     'test dtlsv1.2');
	  ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
	     'test dtlsv1.2 with server authentication');
	  ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
	     'test dtlsv1.2 with client authentication');
	  ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
	     'test dtlsv1.2 with both server and client authentication');
	}

      SKIP: {
	  skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 6
	      if $no_anytls;

	SKIP: {
	    skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;

	    ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
	       'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
	  }

	  ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
	     'test sslv2/sslv3 with 1024bit DHE via BIO pair');
	  ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
	     'test sslv2/sslv3 with server authentication');
	  ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
	     'test sslv2/sslv3 with client authentication via BIO pair');
	  ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
	     'test sslv2/sslv3 with both client and server authentication via BIO pair');
	  ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
	     'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
433 434 435 436 437
	}
    };

    subtest "Testing ciphersuites" => sub {

438 439 440
        my @exkeys = ();
        my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";

441
        if ($no_dh) {
442 443 444
            note "skipping DHE tests\n";
            $ciphers .= ":-kDHE";
        }
445
        if ($no_dsa) {
446 447 448 449 450 451
            note "skipping DSA tests\n";
            $ciphers .= ":-aDSA";
        } else {
            push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
        }

452
        if ($no_ec) {
453 454 455 456 457
            note "skipping EC tests\n";
            $ciphers .= ":!aECDSA:!kECDH";
        } else {
            push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
        }
458

459
	my @protocols = ();
460
	# FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
461 462
        push(@protocols, "TLSv1.2") unless $no_tls1_2;
        push(@protocols, "SSLv3") unless $no_ssl3;
463 464 465 466
	my $protocolciphersuitcount = 0;
	my %ciphersuites =
	    map { my @c =
		      map { split(/:/, $_) }
467 468
		      run(app(["openssl", "ciphers", "${_}:$ciphers"]),
                          capture => 1);
469
		  map { s/\R//; } @c;  # chomp @c;
470 471 472
		  $protocolciphersuitcount += scalar @c;
		  $_ => [ @c ] } @protocols;

473 474 475
        plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
            if $protocolciphersuitcount + scalar(@protocols) == 0;

476 477 478
        # The count of protocols is because in addition to the ciphersuits
        # we got above, we're running a weak DH test for each protocol
	plan tests => $protocolciphersuitcount + scalar(@protocols);
479 480 481 482

	foreach my $protocol (@protocols) {
	    note "Testing ciphersuites for $protocol";
	    foreach my $cipher (@{$ciphersuites{$protocol}}) {
483
		ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
484 485 486
			     $protocol eq "SSLv3" ? ("-ssl3") : ()])),
		   "Testing $cipher");
	    }
487 488 489 490 491 492
            is(run(test([@ssltest,
                         "-s_cipher", "EDH",
                         "-c_cipher", 'EDH:@SECLEVEL=1',
                         "-dhe512",
                         $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
               "testing connection with weak DH, expecting failure");
493 494 495 496 497 498 499 500
	}
    };

    subtest 'RSA/(EC)DHE/PSK tests' => sub {
	######################################################################

	plan tests => 5;

501 502 503
      SKIP: {
	  skip "TLSv1.0 is not supported by this OpenSSL build", 5
	      if $no_tls1;
504

505 506 507
	SKIP: {
	    skip "skipping anonymous DH tests", 1
	      if ($no_dh);
508

509 510 511
	    ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
	       'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
	  }
512

513 514 515
	SKIP: {
	    skip "skipping RSA tests", 2
		if $no_rsa;
516

517 518
	    ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
	       'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
519

520 521 522 523 524 525 526 527 528
	    skip "skipping RSA+DHE tests", 1
		if $no_dh;

	    ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
	       'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
	  }

	SKIP: {
	    skip "skipping PSK tests", 2
D
Dr. Stephen Henson 已提交
529 530
	        if ($no_psk);

531 532
	    ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
	       'test tls1 with PSK');
D
Dr. Stephen Henson 已提交
533

534 535 536 537
	    ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
	       'test tls1 with PSK via BIO pair');
	  }
	}
538 539 540 541 542 543 544 545

    };

    subtest 'Next Protocol Negotiation Tests' => sub {
	######################################################################

	plan tests => 7;

546 547 548 549 550 551 552 553 554 555 556 557
      SKIP: {
	  skip "TLSv1.0 is not supported by this OpenSSL build", 7
	      if $no_tls1;

	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
	}
558 559 560 561 562 563 564
    };

    subtest 'Custom Extension tests' => sub {
	######################################################################

	plan tests => 1;

565
      SKIP: {
566
	  skip "TLSv1.0 is not supported by this OpenSSL build", 1
567 568 569 570 571
	      if $no_tls1;

	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
	     'test tls1 with custom extensions');
	}
572 573 574 575 576 577 578
    };

    subtest 'Serverinfo tests' => sub {
	######################################################################

	plan tests => 5;

579 580 581 582 583 584 585 586 587 588 589
      SKIP: {
	  skip "TLSv1.0 is not supported by this OpenSSL build", 5
	      if $no_tls1;

	  note('echo test tls1 with serverinfo');
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
	}
590 591 592 593 594 595 596
    };

    subtest 'ALPN tests' => sub {
	######################################################################

	plan tests => 12;

597 598 599 600 601 602 603 604 605 606 607 608
      SKIP: {
	  skip "TLSv1.0 is not supported by this OpenSSL build", 12
	      if $no_tls1;

	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])));
609

610 611 612
	SKIP: {
	    skip "skipping SRP tests", 4
		if $no_srp;
613

614 615
	    ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
	       'test tls1 with SRP');
616

617 618
	    ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
	       'test tls1 with SRP via BIO pair');
619

620
	    ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
621 622
		 'test tls1 with SRP auth');

623 624 625
	    ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
	       'test tls1 with SRP auth via BIO pair');
	  }
626 627 628 629 630 631 632 633
	}
    };

    subtest 'Multi-buffer tests' => sub {
	######################################################################

	plan tests => 2;

634 635 636 637 638 639 640 641 642 643 644 645 646 647
      SKIP: {
	  skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
	      if $no_anytls;

	  skip "skipping multi-buffer tests", 2
	      if @extra || (POSIX::uname())[4] ne "x86_64";

	  ok(run(test([@ssltest, "-cipher", "AES128-SHA",    "-bytes", "8m"])));

	  # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
	  skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
	      if $no_tls1_2;

	  ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
648 649
	}
    };
650

651 652 653 654 655 656 657 658 659 660 661 662
    subtest 'TLS Version min/max tests' => sub {
        my @protos;
        push(@protos, "ssl3") unless $no_ssl3;
        push(@protos, "tls1") unless $no_tls1;
        push(@protos, "tls1.1") unless $no_tls1_1;
        push(@protos, "tls1.2") unless $no_tls1_2;
        my @minprotos = (undef, @protos);
        my @maxprotos = (@protos, undef);
        my @shdprotos = (@protos, $protos[$#protos]);
        my $n = ((@protos+2) * (@protos+3))/2 - 2;
        my $ntests = $n * $n;
	plan tests => $ntests;
663
      SKIP: {
664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696
        skip "TLS disabled", 1 if $ntests == 1;

        my $should;
        for (my $smin = 0; $smin < @minprotos; ++$smin) {
        for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
        for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
        for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
            if ($cmax < $smin-1) {
                $should = "fail-server";
            } elsif ($smax < $cmin-1) {
                $should = "fail-client";
            } elsif ($cmax > $smax) {
                $should = $shdprotos[$smax];
            } else {
                $should = $shdprotos[$cmax];
            }

            my @args = @ssltest;
            push(@args, "-should_negotiate", $should);
            push(@args, "-server_min_proto", $minprotos[$smin])
                if (defined($minprotos[$smin]));
            push(@args, "-server_max_proto", $maxprotos[$smax])
                if (defined($maxprotos[$smax]));
            push(@args, "-client_min_proto", $minprotos[$cmin])
                if (defined($minprotos[$cmin]));
            push(@args, "-client_max_proto", $maxprotos[$cmax])
                if (defined($maxprotos[$cmax]));
            my $ok = run(test[@args]);
            if (! $ok) {
                print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
                print STDERR "\nFailed: @args\n";
            }
            ok($ok);
697
        }}}}}
698
    };
699

700 701 702 703 704 705 706 707 708 709
    subtest 'DTLS Version min/max tests' => sub {
        my @protos;
        push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
        push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
        my @minprotos = (undef, @protos);
        my @maxprotos = (@protos, undef);
        my @shdprotos = (@protos, $protos[$#protos]);
        my $n = ((@protos+2) * (@protos+3))/2 - 2;
        my $ntests = $n * $n;
	plan tests => $ntests;
710
      SKIP: {
711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743
        skip "DTLS disabled", 1 if $ntests == 1;

        my $should;
        for (my $smin = 0; $smin < @minprotos; ++$smin) {
        for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
        for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
        for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
            if ($cmax < $smin-1) {
                $should = "fail-server";
            } elsif ($smax < $cmin-1) {
                $should = "fail-client";
            } elsif ($cmax > $smax) {
                $should = $shdprotos[$smax];
            } else {
                $should = $shdprotos[$cmax];
            }

            my @args = (@ssltest, "-dtls");
            push(@args, "-should_negotiate", $should);
            push(@args, "-server_min_proto", $minprotos[$smin])
                if (defined($minprotos[$smin]));
            push(@args, "-server_max_proto", $maxprotos[$smax])
                if (defined($maxprotos[$smax]));
            push(@args, "-client_min_proto", $minprotos[$cmin])
                if (defined($minprotos[$cmin]));
            push(@args, "-client_max_proto", $maxprotos[$cmax])
                if (defined($maxprotos[$cmax]));
            my $ok = run(test[@args]);
            if (! $ok) {
                print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
                print STDERR "\nFailed: @args\n";
            }
            ok($ok);
744
        }}}}}
745
    };
746 747 748
}

sub testsslproxy {
R
Richard Levitte 已提交
749 750 751 752 753 754 755 756 757
    my $key = shift || top_file("apps","server.pem");
    my $cert = shift || top_file("apps","server.pem");
    my $CAtmp = shift;
    my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
    my @extra = @_;

    my @ssltest = ("ssltest",
		   "-s_key", $key, "-s_cert", $cert,
		   "-c_key", $key, "-c_cert", $cert);
758 759 760 761

    # plan tests => 16;

    note('Testing a lot of proxy conditions.');
R
Richard Levitte 已提交
762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804

    # We happen to know that certP1.ss has policy letters "AB" and
    # certP2.ss has policy letters "BC".  However, because certP2.ss
    # has certP1.ss as issuer, when it's used, both their policy
    # letters get combined into just "B".
    # The policy letter(s) then get filtered with the given auth letter
    # in the table below, and the result gets tested with the given
    # condition.  For details, read ssltest.c
    #
    # certfilename => [ [ auth, cond, expected result ] ... ]
    my %expected = ( "certP1.ss" => [ [ [ 'A',  'A'      ], 1 ],
                                      [ [ 'A',  'B'      ], 0 ],
                                      [ [ 'A',  'C'      ], 0 ],
                                      [ [ 'A',  'A|B&!C' ], 1 ],
                                      [ [ 'B',  'A'      ], 0 ],
                                      [ [ 'B',  'B'      ], 1 ],
                                      [ [ 'B',  'C'      ], 0 ],
                                      [ [ 'B',  'A|B&!C' ], 1 ],
                                      [ [ 'C',  'A'      ], 0 ],
                                      [ [ 'C',  'B'      ], 0 ],
                                      [ [ 'C',  'C'      ], 0 ],
                                      [ [ 'C',  'A|B&!C' ], 0 ],
                                      [ [ 'BC', 'A'      ], 0 ],
                                      [ [ 'BC', 'B'      ], 1 ],
                                      [ [ 'BC', 'C'      ], 0 ],
                                      [ [ 'BC', 'A|B&!C' ], 1 ] ],
                     "certP2.ss" => [ [ [ 'A',  'A'      ], 0 ],
                                      [ [ 'A',  'B'      ], 0 ],
                                      [ [ 'A',  'C'      ], 0 ],
                                      [ [ 'A',  'A|B&!C' ], 0 ],
                                      [ [ 'B',  'A'      ], 0 ],
                                      [ [ 'B',  'B'      ], 1 ],
                                      [ [ 'B',  'C'      ], 0 ],
                                      [ [ 'B',  'A|B&!C' ], 1 ],
                                      [ [ 'C',  'A'      ], 0 ],
                                      [ [ 'C',  'B'      ], 0 ],
                                      [ [ 'C',  'C'      ], 0 ],
                                      [ [ 'C',  'A|B&!C' ], 0 ],
                                      [ [ 'BC', 'A'      ], 0 ],
                                      [ [ 'BC', 'B'      ], 1 ],
                                      [ [ 'BC', 'C'      ], 0 ],
                                      [ [ 'BC', 'A|B&!C' ], 1 ] ] );

805 806 807 808 809 810 811 812 813 814 815 816 817 818
  SKIP: {
      skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
	  if $no_anytls;

      foreach (@{$expected{$cert}}) {
	  my $auth = $_->[0]->[0];
	  my $cond = $_->[0]->[1];
	  my $res  = $_->[1];
	  is(run(test([@ssltest, "-server_auth", @CA,
		       "-proxy", "-proxy_auth", $auth,
		       "-proxy_cond", $cond])), $res,
	     "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
	     .($res ? "success" : "failure").")");
      }
819 820
    }
}