- 28 6月, 2018 1 次提交
-
-
由 Rich Felker 提交于
-
- 27 6月, 2018 9 次提交
-
-
由 Patrick Oppenlander 提交于
-
由 David Carlier 提交于
maintainer's note: past sentiment was that, despite being imperfect and unable to force clearing of all possible copies of sensitive data (e.g. in registers, register spills, signal contexts left on the stack, etc.) this function would be added if major implementations agreed on it, which has happened -- several BSDs and glibc all include it.
-
由 Arthur Jones 提交于
maintainer's note: this change is for conformance with RFC 5952, 4.2.2, which explicitly forbids use of :: to shorten a single 16-bit 0 field when producing the canonical text representation for an IPv6 address. fixes a test failure reported by Philip Homburg, who also submitted a patch, but this fix is simpler and should produce smaller code.
-
由 Daniel Sabogal 提交于
the expression (tm->__tm_gmtoff)/3600 has type long. use %+.2ld instead.
-
由 Rich Felker 提交于
if a final dot was included in the queried host name to anchor it to the dns root/suppress search domains, and the result was not a CNAME, the returned canonical name included the final dot. this was not consistent with other implementations, confused some applications, and does not seem desirable. POSIX specifies returning a pointer to, or to a copy of, the input nodename, when the canonical name is not available, but does not attempt to specify what constitutes "not available". in the case of search, we already have an implementation-defined "availability" of a canonical name as the fully-qualified name resulting from search, so defining it similarly in the no-search case seems reasonable in addition to being consistent with other implementations. as a bonus, fix the case where more than one trailing dot is included, since otherwise the changes made here would wrongly cause lookups with two trailing dots to succeed. previously this case resulted in malformed dns queries and produced EAI_AGAIN after a timeout. now it fails immediately with EAI_NONAME.
-
由 Rich Felker 提交于
commit 587f5a53 moved the definition of SO_PEERSEC to bits/socket.h for archs where the SO_* macros differ from their standard values, but failed to add copies of the generic definition for powerpc and powerpc64.
-
由 Rich Felker 提交于
adapted from patch by Matthias Schiffer.
-
由 Rich Felker 提交于
-
由 Rich Felker 提交于
writable load segments can have size-in-memory larger than their size in the ELF file, representing bss or equivalent. the initial partial page has to be zero-filled, and additional anonymous pages have to be mapped such that accesses don't failt with SIGBUS. map_library skips redundant MAP_FIXED mapping of the initial (lowest-address) segment when processing LOAD segments since it was already mapped when reserving the virtual address range, but in doing so, inadvertently also skipped the code to fill/map bss. typical executable and library files have two or more LOAD segments, and the first one is text/rodata (non-writable) and thus has no bss, but it is syntactically valid for an ELF program/library to put its writable segment first, or to have only one segment (everything writable). the binutils bfd-based linker has been observed to create such programs in the presence of unusual sections or linker scripts. fix by moving only the mmap_fixed operation under the conditional rather than skipping the remainder of the loop body. add a check to avoid bss processing in the case where the segment is not writable; this should not happen, but if it does, the change would be a crashing regression without this check.
-
- 21 6月, 2018 3 次提交
-
-
由 Szabolcs Nagy 提交于
memfd_create was added in linux v3.17 and glibc has api for it.
-
由 Szabolcs Nagy 提交于
mlock2 syscall was added in linux v4.4 and glibc has api for it. It falls back to mlock in case of flags==0, so that case works even on older kernels. MLOCK_ONFAULT is moved under _GNU_SOURCE following glibc.
-
由 Rich Felker 提交于
unlike the x86 variant, the m68k ld80 format allows (biased) exponent zero with mantissa msb set, thereby extending the normal range.
-
- 20 6月, 2018 16 次提交
-
-
由 Rich Felker 提交于
the mode member of struct ipc_perm is specified by POSIX to have type mode_t, which is uniformly defined as unsigned int. however, Linux defines it with type __kernel_mode_t, and defines __kernel_mode_t as unsigned short on some archs. since there is a subsequent padding field, treating it as a 32-bit unsigned int works on little endian archs, but the order is backwards on big endian archs with the erroneous definition. since multiple archs are affected, remedy the situation with fixup code in the affected functions (shmctl, semctl, and msgctl) rather than repeating the same shims in syscall_arch.h for every affected arch.
-
由 Szabolcs Nagy 提交于
new in linux commit 71406883fd35794d573b3085433c41d0a3bf6c21
-
由 Szabolcs Nagy 提交于
new in linux commit 256211f2b0b251e532d1899b115e374feb16fa7a
-
由 Szabolcs Nagy 提交于
hwcaps for armv8.4, new in linux commit 7206dc93a58fb76421c4411eefa3c003337bcb2d
-
由 Szabolcs Nagy 提交于
PR_{SET,GET}_SPECULATION_CTRL controls speculation related vulnerability mitigations, new in commits b617cfc858161140d69cc0b5cc211996b557a1c7 356e4bfff2c5489e016fdb925adbf12a1e3950ee
-
由 Szabolcs Nagy 提交于
added in linux commit 4fe0de5b143762d327bfaf1d7be7c5b58041a18c
-
由 Szabolcs Nagy 提交于
new and missing netlink attributes types for SCM_TIMESTAMPING_OPT_STATS, new ones were added in commits 7156d194a0772f733865267e7207e0b08f81b02b be631892948060f44b1ceee3132be1266932071e 87ecc95d81d951b0984f2eb9c5c118cb68d0dce8
-
由 Szabolcs Nagy 提交于
introduced to stat ipc objects without permission checks since the info is available in /proc/sysvipc anyway, new in linux commits 23c8cec8cf679b10997a512abb1e86f0cedc42ba a280d6dc77eb6002f269d58cd47c7c7e69b617b6 c21a6970ae727839a2f300cd8dd957de0d0238c3
-
由 Szabolcs Nagy 提交于
to map at a fixed address without unmapping underlying mappings (fails with EEXIST unlike MAP_FIXED), new in linux commits 4ed28639519c7bad5f518e70b3284c6e0763e650 and a4ff8e8620d3f4f50ac4b41e8067b7d395056843.
-
由 Szabolcs Nagy 提交于
add pkey_mprotect, pkey_alloc, pkey_free syscall numbers, new in linux commits 3350eb2ea127978319ced883523d828046af4045 and 9499ec1b5e82321829e1c1510bcc37edc20b6f38
-
由 Szabolcs Nagy 提交于
armv8.4 fp mul instructions. added in commit 3b3b681097fae73b7f5dcdd42db6cfdf32943d4c
-
由 Szabolcs Nagy 提交于
to get seccomp state for checkpoint restore. added in linux commit 26500475ac1b499d8636ff281311d633909f5d20 struct tag follows the glibc api and ptrace_peeksiginfo_args got changed too accordingly.
-
由 Szabolcs Nagy 提交于
octets in ethernet type field added in linux commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61
-
由 Szabolcs Nagy 提交于
protocol number for erspan v2 support added in linux commit f551c91de262ba36b20c3ac19538afb4f4507441
-
由 Szabolcs Nagy 提交于
added to uapi in commit 65aaf87b3aa2d049c6b9fd85221858a895df3393 used since commit a9a08845e9acbd224e4ee466f5c1275ed50054e8, which renamed POLL* to EPOLL* in the kernel.
-
由 Rich Felker 提交于
three ABIs are supported: the default with 68881 80-bit fpu format and results returned in floating point registers, softfloat-only with the same format, and coldfire fpu with IEEE single/double only. only the first is tested at all, and only under qemu which has fpu emulation bugs. basic functionality smoke tests have been performed for the most common arch-specific breakage via libc-test and qemu user-level emulation. some sysvipc failures remain, but are shared with other big endian archs and will be fixed separately.
-
- 15 6月, 2018 1 次提交
-
-
由 Rich Felker 提交于
since x86 and m68k are the only archs with 80-bit long double and each has mandatory endianness, select the variant via endianness. differences are minor: apparently just byte order and representation of infinities. the m68k format is not well-documented anywhere I could find, so if other differences are found they may require additional changes later.
-
- 13 6月, 2018 1 次提交
-
-
由 Rich Felker 提交于
-
- 03 6月, 2018 1 次提交
-
-
由 Szabolcs Nagy 提交于
In TLS variant I the TLS is above TP (or above a fixed offset from TP) but on some targets there is a reserved gap above TP before TLS starts. This matters for the local-exec tls access model when the offsets of TLS variables from the TP are hard coded by the linker into the executable, so the libc must compute these offsets the same way as the linker. The tls offset of the main module has to be alignup(GAP_ABOVE_TP, main_tls_align). If there is no TLS in the main module then the gap can be ignored since musl does not use it and the tls access models of shared libraries are not affected. The previous setup only worked if (tls_align & -GAP_ABOVE_TP) == 0 (i.e. TLS did not require large alignment) because the gap was treated as a fixed offset from TP. Now the TP points at the end of the pthread struct (which is aligned) and there is a gap above it (which may also need alignment). The fix required changing TP_ADJ and __pthread_self on affected targets (aarch64, arm and sh) and in the tlsdesc asm the offset to access the dtv changed too.
-
- 02 6月, 2018 2 次提交
-
-
由 Rich Felker 提交于
since this iconv implementation's output is stateless, it's necessary to know before writing anything to the output buffer whether the conversion of the current input character will fit. previously we used a hard-coded table of the output size needed for each supported output encoding, but failed to update the table when adding support for conversion to jis-based encodings and again when adding separate encoding identifiers for implicit-endianness utf-16/32 and ucs-2/4 variants, resulting in out-of-bound table reads and incorrect size checks. no buffer overflow was possible, but the affected characters could be converted incorrectly, and iconv could potentially produce an incorrect return value as a result. remove the hard-coded table, and instead perform the recursive iconv conversion to a temporary buffer, measuring the output size and transferring it to the actual output buffer only if the whole converted result fits.
-
由 Rich Felker 提交于
this case is handled with a recursive call to iconv using a specially-constructed conversion descriptor. the constant 0 was used as the offset for utf-8, since utf-8 appears first in the charmaps table, but the offset used needs to point into the charmap entry, past the name/aliases at the beginning, to the byte identifying the encoding. as a result of this error, junk was produced. instead, call find_charmap so we don't have to hard-code a nontrivial offset. with this change, the code has been tested and found to work in the case of converting the affected hkscs characters to utf-8.
-
- 10 5月, 2018 2 次提交
-
-
由 Will Dietz 提交于
maintainer's notes: commit 95c6044e split UTF-32 and UTF-32BE but neglected to add a case for the former as a destination encoding, resulting in it wrongly being handled by the default case. the intent was that the value of the macro be chosen to encode "big endian" in the low bits, so that no code would be needed, but this was botched; instead, handle it the way UCS2 is handled.
-
由 Will Dietz 提交于
maintainer's notes: commit a223dbd2 added the reverse conversions to JIS-based encodings, but omitted the check for remining buffer space in the case where the next character to be written was single-byte, allowing conversion to continue past the end of the destination buffer.
-
- 09 5月, 2018 2 次提交
-
-
由 Rich Felker 提交于
the wrapper start function that performs scheduling operations is unreachable if pthread_attr_setinheritsched is never called, so move it there rather than the pthread_create source file, saving some code size for static-linked programs.
-
由 Rich Felker 提交于
eliminate the awkward startlock mechanism and corresponding fields of the pthread structure that were only used at startup. instead of having pthread_create perform the scheduling operations and having the new thread wait for them to be completed, start the new thread with a wrapper start function that performs its own scheduling, sending the result code back via a futex. this way the new thread can use storage from the calling thread's stack rather than permanent fields in the pthread structure.
-
- 08 5月, 2018 1 次提交
-
-
由 Rich Felker 提交于
over time the pthread structure has accumulated a lot of cruft taking up size. this commit removes unused fields and packs booleans and other small data more efficiently. changes which would also require changing code are not included at this time. non-volatile booleans are packed as unsigned char bitfield members. the canceldisable and cancelasync fields need volatile qualification due to how they're accessed from the cancellation signal handler and cancellable syscalls called from signal handlers. since volatile bitfield semantics are not clearly defined, discrete char objects are used instead. the pid field is completely removed; it has been unused since commit 83dc6eb0. the tid field's type is changed to int because its use is as a value in futexes, which are defined as plain int. it has no conceptual relationship to pid_t. also, its position is not ABI. startlock is reduced to a length-1 array. the second element was presumably intended as a waiter count, but it was never used and made no sense, since there is at most one waiter.
-
- 06 5月, 2018 1 次提交
-
-
由 Rich Felker 提交于
previously, some accesses to the detached state (from pthread_join and pthread_getattr_np) were unsynchronized; they were harmless in programs with well-defined behavior, but ugly. other accesses (in pthread_exit and pthread_detach) were synchronized by a poorly named "exitlock", with an ad-hoc trylock operation on it open-coded in pthread_detach, whose only purpose was establishing protocol for which thread is responsible for deallocation of detached-thread resources. instead, use an atomic detach_state and unify it with the futex used to wait for thread exit. this eliminates 2 members from the pthread structure, gets rid of the hackish lock usage, and makes rigorous the trap added in commit 80bf5952 for catching attempts to join detached threads. it should also make attempt to detach an already-detached thread reliably trap.
-