according to Stefan Kristiansson, or1k page size is not actually
variable and the value of 8192 is part of the ABI.

using an operator precedence parser the code size
became smaller and it is only slower by about %10

size of old vs new pleval.o on different archs:
(with inlined isspace added to pleval.c for now)

old:
   text    data     bss     dec     hex filename
    828       0       0     828     33c pl.i386.o
   1152       0       0    1152     480 pl.arm.o
   1704       0       0    1704     6a8 pl.mips.o
   1328       0       0    1328     530 pl.ppc.o
    992       0       0     992     3e0 pl.x64.o
new:
   text    data     bss     dec     hex filename
    693       0       0     693     2b5 pl.i386.o
    972       0       0     972     3cc pl.arm.o
   1276       0       0    1276     4fc pl.mips.o
   1087       0       0    1087     43f pl.ppc.o
    846       0       0     846     34e pl.x64.o

the previous implementations had several deficiencies, the most severe
of which was the inability to report unconfigured interfaces or
interfaces without ipv4 addresses. among the options discussed for
fixing this, using netlink turned out to be the one with the least
cost and most additional advantages. other improvements include:

if_nameindex now avoids duplicates in the list it produces, but still
includes legacy-style interface aliases if any are in use.

getifaddrs now reports hardware addresses and includes the scope_id
for link-local ipv6 addresses in the resulting address.

this commit changes the names to match the kernel names, exposing
under the normal names the "old" versions which work with a smaller
termios structure compatible with the userspace structure, and
renaming the "new" versions with "2" on the end like the kernel has.

this fixes spurious warnings "Unsupported ioctl: cmd=0x802c542a" from
qemu-sh4 and should be more correct anyway, since our userspace
termios structure does not have meaningful information in the part
which the kernel would be interpreting as speeds with the new ioctl.

const parsing, depth accounting and failure handling was changed
a bit so the generated code is slightly smaller.

while the __mo_lookup backend can verify that the translated message
ends with a null terminator, is has no way to know nplurals and thus
no way to verify that sufficiently many null terminators are present
in the string to satisfy all plural forms. the code in dcngettext was
already attempting to avoid reading past the end of the mo file
mapping, but failed to do so because the strlen call itself could
over-read. using strnlen instead allows us to avoid the problem.

rather than just checking that the start of the string lies within the
mapping, also check that the nominal length remains within the
mapping, and that the null terminator is present at the nominal
length. this ensures that the caller, using the result as a C string,
will not read past the end of the mapping.

the nominal length is never exposed to the caller, but it's useful
internally to find where the null terminator should be without having
to restort to linear search via strnlen/memchr.

the new code in dcngettext was written by me, and the expression
evaluator by Szabolcs Nagy (nsz).

this follows the same logic as in the previous commit for other archs.

the a_cas_l, a_swap_l, a_swap_p, and a_store_l operations were
probably used a long time ago when only i386 and x86_64 were
supported. as other archs were added, support for them was
inconsistent, and they are obviously not in use at present. having
them around potentially confuses readers working on new ports, and the
type-punning hacks and inconsistent use of types in their definitions
is not a style I wish to perpetuate in the source tree, so removing
them seems appropriate.

while other usage I've seen only has the synco instruction after the
atomic operation, I cannot find any documentation indicating that this
is correct. certainly all stores before the atomic need to have been
synchronized before the atomic operation takes place.

this commit replaces the stub implementations with working message
translation functions. translation units are factored so as to prevent
pulling in the legacy, non-library-safe functions which use a global
textdomain in modern code which is using the versions with an explicit
domain argument. bind_textdomain_codeset is also placed in its own
file since it should not be needed by most programs.

this implementation is still missing some features: the LANGUAGE
environment variable (for multiple fallback languages) is not honored,
and non-default plural-form rules are not supported. these issues will
be addressed in a later commit.

one notable difference from the GNU implementation is that there is no
default path for loading translation files. in principle one could be
added, but since the documented correct usage is to call the
bindtextdomain function, a default path is probably unnecessary.

for LC_MESSAGES, translation of strerror and similar literal message
functions is supported. for messages in other places (particularly the
dynamic linker) that use format strings, translation is not yet
supported. in order to make it possible and safe, such messages will
need to be refactored to separate the textual content from the format.

for LC_TIME, the day and month names and strftime-style format strings
provided by nl_langinfo are supported for translation. however there
may be limitations, as some of the original C-locale nl_langinfo
strings are non-unique and thus perhaps non-suitable as keys.

overall, the locale support activated by this commit should not be
seen as complete and polished but as a basis for beginning to test
locale functionality and implement locales.

these were removed from the standard but still offered as an extension
in langinfo.h, so nl_langinfo should support them.

due to a skipped slot and missing null terminator, the last few
strings were off by one or two slots from their item codes.

the core is based on a binary search; hash table is not used. both
native and reverse-endian mo files are supported. all offsets read
from the mapped mo file are checked against the mapping size to
prevent the possibility of reads outside the mapping.

this commit has no observable effects since there are not yet any
callers to the message translation code.

there is still no code which actually uses the loaded locale files, so
the main observable effect of this commit is that calls to setlocale
store and give back the names of the selected locales for the
remaining categories (LC_TIME, LC_COLLATE, LC_MONETARY) if a locale
file by the requested name could be loaded.

per POSIX (XBD 8.2) LC_*/LANG environment variables set to to the
empty string are supposed to be treated as if they were not set at
all.

they can be used to set or query if transparent huge pages are disabled.
introduced in linux 3.15 commit a0715cc22601e8830ace98366c0c2bd8da52af52

used by monitoring applications such as ss from iproute2
introduced in linux 3.15 commit 977cb0ecf82eb6d15562573c31edebf90db35163

ETH_P_80221 is ethertype for IEEE Std 802.21 - Media Independent Handover Protocol
introduced in linux 3.15 commit b62faf3cdc875a1ac5a10696cf6ea0b12bab1596

ETH_P_LOOPBACK is the correct packet type for loopback in IEEE 802.3*
introduced in linux 3.15 commit 61ccbb684421d374fdcd7cf5d6b024b06f03ce4e

some defines were shuffled to be in ascending order and match the kernel header

it's like rename but with flags eg. to allow atomic exchange of two files,
introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff

due to what was essentially a copy and paste error, the changes made
in commit f61be1f8 caused syscalls
with 5 or 6 arguments (and syscalls with 2, 3, or 4 arguments when
compiled with clang compatibility) to negate the returned error code a
second time, breaking errno reporting.

the mips version of this structure on the kernel side wrongly has
32-bit type rather than 64-bit type. fortunately there is adjacent
padding to bring it up to 64 bits, and on little-endian, this allows
us to treat the adjacent kernel st_dev and st_pad0[0] as as single
64-bit dev_t. however, on big endian, such treatment results in the
upper and lower 32-bit parts of the dev_t value being swapped. for the
purpose of just comparing st_dev values this did not break anything,
but it precluded actually processing the device numbers as major/minor
values.

since the broken kernel behavior that needs to be worked around is
isolated to one arch, I put the workarounds in syscall_arch.h rather
than adding a stat fixup path in the common code. on little endian
mips, the added code optimizes out completely.

the changes necessary were incompatible with the way the __asm_syscall
macro was factored so I just removed it and flattened the individual
__syscallN functions. this arguably makes the code easier to read and
understand, anyway.

this function provides a way for third-party library code to use the
same logic that's used internally in libc for suppressing untrusted
input/state (e.g. the environment) when the application is running
with privleges elevated by the setuid or setgid bit or some other
mechanism. its semantics are intended to match the openbsd function by
the same name.

there was some question as to whether this function is necessary:
getauxval(AT_SECURE) was proposed as an alternative. however, this has
several drawbacks. the most obvious is that it asks programmers to be
aware of an implementation detail of ELF-based systems (the aux
vector) rather than simply the semantic predicate to be checked. and
trying to write a safe, reliable version of issetugid in terms of
getauxval is difficult. for example, early versions of the glibc
getauxval did not report ENOENT, which could lead to false negatives
if AT_SECURE was not present in the aux vector (this could probably
only happen when running on non-linux kernels under linux emulation,
since glibc does not support linux versions old enough to lack
AT_SECURE). as for musl, getauxval has always properly reported
errors, but prior to commit 7bece9c2,
the musl implementation did not emulate AT_SECURE if missing, which
would result in a false positive. since musl actually does partially
support kernels that lack AT_SECURE, this was problematic.

the intent is that library authors will use issetugid if its
availability is detected at build time, and only fall back to the
unreliable alternatives on systems that lack it.

patch by Brent Cook. commit message/rationale by Rich Felker.

at the very least, a compiler barrier is required no matter what, and
that was missing. current or1k implementations have strong ordering,
but this is not guaranteed as part of the ISA, so some sort of
synchronizing operation is necessary.

in principle we should use l.msync, but due to misinterpretation of
the spec, it was wrongly treated as an optional instruction and is not
supported by some implementations. if future kernels trap it and treat
it as a nop (rather than illegal instruction) when the
hardware/emulator does not support it, we could consider using it.

in the absence of l.msync support, the l.lwa/l.swa instructions, which
are specified to have a built-in l.msync, need to be used. the easiest
way to use them to implement atomic store is to perform an atomic swap
and throw away the result. using compare-and-swap would be lighter,
and would probably be sufficient for all actual usage cases, but
checking this is difficult and error-prone:

with store implemented in terms of swap, it's guaranteed that, when
another atomic operation is performed at the same time as the store,
either the result of the store followed by the other operation, or
just the store (clobbering the other operation's result) is seen. if
store were implemented in terms of cas, there are cases where this
invariant would fail to hold, and we would need detailed rules for the
situations in which the store operation is well-defined.

as far as I can tell, microblaze is strongly ordered, but this does
not seem to be well-documented and the assumption may need revisiting.
even with strong ordering, however, a volatile C assignment is not
sufficient to implement atomic store, since it does not preclude
reordering by the compiler with respect to non-volatile stores and
loads.

simply flanking a C store with empty volatile asm blocks with memory
clobbers would achieve the desired result, but is likely to result in
worse code generation, since the address and value for the store may
need to be spilled. actually writing the store in asm, so that there's
only one asm block, should give optimal code generation while
satisfying the requirement for having a compiler barrier.

previously I had wrongly assumed the ll/sc instructions also provided
memory synchronization; apparently they do not. this commit adds sync
instructions before and after each atomic operation and changes the
atomic store to simply use sync before and after a plain store, rather
than a useless compare-and-swap.

despite lacking the semantic content that the asm accesses the
pointed-to object rather than just using its address as a value, the
mips asm was not actually broken. the asm blocks were declared
volatile, meaning that the compiler must treat them as having unknown
side effects.

however changing the asm to use memory constraints is desirable not
just from a semantic correctness and consistency standpoint, but also
produces better code. the compiler is able to use base/offset
addressing expressions for the atomic object's address rather than
having to load the address into a single register. this improves
access to global locks in static libc, and access to non-zero-offset
atomic fields in synchronization primitives, etc.

due to a mistake in my testing procedure, the changes in the previous
commit were not correctly tested and wrongly assumed to be valid. the
lwarx and stwcx. instructions do not accept general ppc memory address
expressions and thus the argument associated with the memory
constraint cannot be used directly.

instead, the memory constraint can be left as an argument that the asm
does not actually use, and the address can be provided in a separate
register constraint.

the register constraint for the address to be accessed did not convey
that the asm can access the pointed-to object. as far as the compiler
could tell, the result of the asm was just a pure function of the
address and the values passed in, and thus the asm could be hoisted
out of loops or omitted entirely if the result was not used.

this code path is used only on archs without the plain, non-at
syscalls, and only when the fstat syscall fails with EBADF on a valid
file descriptor. this in turn can happen only for O_PATH file
descriptors, and may not happen at all on the newer kernels needed for
supporting such archs.

with the flags argument omitted, spurious fstat failures may happen
when the argument register happens to have the AT_SYMLINK_NOFOLLOW bit
set.

the erroneous definition was missed because with works with qemu
user-level emulation, which also has the wrong definition. the actual
kernel uses the asm-generic generic definition.

With the exception of a fenv implementation, the port is fully featured.
The port has been tested in or1ksim, the golden reference functional
simulator for OpenRISC 1000.
It passes all libc-test tests (except the math tests that
requires a fenv implementation).

The port assumes an or1k implementation that has support for
atomic instructions (l.lwa/l.swa).

Although it passes all the libc-test tests, the port is still
in an experimental state, and has yet experienced very little
'real-world' use.

this could happen on 2.4-series linux kernels that predate AT_SECURE
and possibly on other kernels that are emulating the linux syscall API
but not providing AT_SECURE in the aux vector at startup.

in principle applications should be checking errno anyway, but this
does not really work. to be secure, the caller would have to treat
ENOENT (indeterminate result) as possibly-suid and thereby disable
functionality in the typical non-suid usage case. and since glibc only
runs on kernels that provide AT_SECURE, applications written to the
glibc getauxval API might simply assume it succeeds.

this was originally added as a cheap but portable way to quell
warnings about reaching the end of a function that does not return,
but since _Exit is marked _Noreturn, it's not needed. removing it
makes the call to _Exit into a tail call and shaves off a few bytes of
code from minimal static programs.

per POSIX, the nmatch and pmatch arguments are ignored when the regex
was compiled with REG_NOSUB.