this is not necessary for linux but is a simple, inexpensive change to
make that facilitates ports to systems where NAME_MAX needs to be
longer.

This patch adds an explicit cast to the int arguments passed to the
inline asm used in the RISC-V's implementation of `a_cas`, to ensure
that they are properly sign extended to 64 bits. They aren't
automatically sign extended by Clang, and GCC technically also doesn't
guarantee that they will be sign extended.

gawk 5 complains.

For Thumb2 compatibility, replace two instances of a single
instruction "orr with a variable shift" with the two instruction
equivalent. Neither of the replacements are in a performance critical
loop.

the bug fixed in commit b82cd6c7 was
mostly masked on arm because __hwcap was zero at the point of the call
from the dynamic linker to __set_thread_area, causing the access to
libc.auxv to be skipped and kuser_helper versions of TLS access and
atomics to be used instead of the armv6 or v7 versions. however, on
kernels with kuser_helper removed for hardening it would crash.

since __set_thread_area potentially uses __hwcap, it must be
initialized before the function is called. move the AT_HWCAP lookup
from stage 3 to stage 2b.

This macro exists since Linux 2.6.25 and is defined in glibc since 2011.

commit 1b0ce9af introduced this bug
back in 2012 and it was never noticed, presumably since the affected
planes are essentially unused in Unicode.

This enables alternative compilers, which may not define __GNUC__,
to implement alloca, which is still fairly widely used.

This is similar to how stdarg.h already works in musl; compilers must
implement __builtin_va_arg, there is no fallback definition.

this change was discussed on the mailing list thread for the linux
uapi v5.3 patches, and submitted as a v2 patch, but overlooked when I
applied the patches much later.

revert commit f291c09e and apply the
v2 as submitted; the net change is just padding.

notes by Szabolcs Nagy follow:

compared to the linux uapi (and glibc) a padding is used instead of
aligned attribute for keeping the layout the same across targets, this
means the alignment of the struct may be different on some targets
(e.g. m68k where uint64_t is 2 byte aligned) but that should not affect
syscalls and this way the abi does not depend on nonstandard extensions.

at least gcc 9 broke execution of DT_INIT/DT_FINI for fdpic archs
(presently only sh) by recognizing that the stores to the
compound-literal function descriptor constructed to call them were
dead stores. there's no way to make a "may_alias function", so instead
launder the descriptor through an asm-statement barrier. in practice
just making the compound literal volatile seemed to have worked too,
but this should be less of a hack and more accurately convey the
semantics of what transformations are not valid.

commit 1c84c999 moved the call to
__init_tp above the initialization of libc.auxv, inadvertently
breaking archs where __set_thread_area examines auxv for the sake of
determining the TLS/atomic model needed at runtime. this broke armv6
and sh2.

this interface contract is entirely internal to dynlink.c.

the syscall numbers were reserved in v5.3 but not wired up on mips, see

  linux commit 0671c5b84e9e0a6d42d22da9b5d093787ac1c5f3
  MIPS: Wire up clone3 syscall

mips application specific isa extensions were previously not exported
in hwcaps so userspace could not apply optimized code at runtime.

  linux commit 38dffe1e4dde1d3174fdce09d67370412843ebb5
  MIPS: elf_hwcap: Export userspace ASEs

allows waiting on a pidfd, in the future it might allow retrieving the
exit status by a non-parent process, see

  linux commit 3695eae5fee0605f316fbaad0b9e3de791d7dfaf
  pidfd: add P_PIDFD to waitid()

tcpi_rcv_ooopack for tracking connection quality:

  linux commit f9af2dbbfe01def62765a58af7fbc488351893c3
  tcp: Add TCP_INFO counter for packets received out-of-order

tcpi_snd_wnd peer window size for diagnosing tcp performance problems:

  linux commit 8f7baad7f03543451af27f5380fc816b008aa1f2
  tcp: Add snd_wnd to TCP_INFO

per thread prctl commands to relax the syscall abi such that top bits
of user pointers are ignored in the kernel. this allows the use of
those bits by hwasan or by mte to color pointers and memory on aarch64:

  linux commit 63f0c60379650d82250f22e4cf4137ef3dc4f43d
  arm64: Introduce prctl() options to control the tagged user addresses ABI

These were mainly introduced so android can optimize the memory usage
of unused apps.

MADV_COLD hints that the memory range is currently not needed (unlike
with MADV_FREE the content is not garbage, it needs to be swapped):

  linux commit 9c276cc65a58faf98be8e56962745ec99ab87636
  mm: introduce MADV_COLD

MADV_PAGEOUT hints that the memory range is not needed for a long time
so it can be reclaimed immediately independently of memory pressure
(unlike with MADV_DONTNEED the content is not garbage):

  linux commit 1a4e58cce84ee88129d5d49c064bd2852b481357
  mm: introduce MADV_PAGEOUT

the syscall number is reserved on all targets, but it is not wired up
on all targets, see

  linux commit 8f6ccf6159aed1f04c6d179f61f6fb2691261e84
  Merge tag 'clone3-v5.3' of ... brauner/linux

  linux commit 8f3220a806545442f6f26195bc491520f5276e7c
  arch: wire-up clone3() syscall

  linux commit 7f192e3cd316ba58c88dfa26796cf77789dd9872
  fork: add clone3

see

  linux commit 7615d9e1780e26e0178c93c55b73309a5dc093d7
  arch: wire-up pidfd_open()

  linux commit 32fcb426ec001cb6d5a4a195091a8486ea77e2df
  pid: add pidfd_open()

ptrace API to get details of the syscall the tracee is blocked in, see

  linux commit 201766a20e30f982ccfe36bebfad9602c3ff574a
  ptrace: add PTRACE_GET_SYSCALL_INFO request

the align attribute was used to keep the layout the same across targets
e.g. on m68k uint32_t is 2 byte aligned, this helps with compat ptrace.

see

  linux commit 99f3a064bc2e4bd5fe50218646c5be342f2ad18c
  bpf: net: Add SO_DETACH_REUSEPORT_BPF

see

  linux commit c54c2c72b2b90a3ba61b8cad032a578ce2bf5b35
  net: Add a define for LLDP ethertype

see

  linux commit a842fe1425cb20f457abd3f8ef98b468f83ca98b
  tcp: add optional per socket transmit delay

adding this condition makes the entire convert_ioctl_struct function
and compat_map table statically unreachable, and thereby optimized out
by dead code elimination, on archs where they are not needed.

VIDIOC_OMAP3ISP_STAT_REQ is a device-specific command for the omap3isp
video device. the command number is in a device-private range and
therefore could theoretically be used by other devices too in the
future, but problematic clashes should not be able to arise without
intentional misuse.

This ensures that the musl definition of 'struct iphdr' does not conflict
with the Linux kernel UAPI definition of it.

Some software, i.e. net-tools, will not compile against 5.4 kernel headers
without this patch and the corresponding Linux kernel patch.

since time64 switchover has changed the size and layout of the struct
anyway, take the opportunity to fix it up so that it can be shared
between 32- and 64-bit ABIs on the same system as long as byte order
matches.

the ut_type member is explicitly padded to make up for m68k having
only 2-byte alignment; explicit padding has no effect on other archs.

ut_session is changed from long to int, with endian-matched padding.
this affects 64-bit archs as well, but brings the type into alignment
with glibc's x86_64 struct, so it should not break software, and does
not break on-disk format. the semantic type is int (pid-like) anyway.
the padding produces correct alignment for the ut_tv member on 32-bit
archs that don't naturally align it, so that ABI matches 64-bit.

this type is presently not used anywhere in the ABI between libc and
libc consumers; it's only used between pairs of consumers if a
third-party utmp library using the system utmpx.h is in use.

the elf_prstatus structure is used in core dumps, and the timeval
structures in it are longs matching the elf class, *not* the kernel
"old timeval" for the arch. this means using timeval here for x32 was
always wrong, despite kernel uapi headers and glibc also exposing it
this way, and of course it's wrong for any arch with 64-bit time_t.

rather than just changing the type on affected archs, use a tagless
struct containing long tv_sec and tv_usec members in place of the
timevals. this intentionally breaks use of them as timevals (e.g.
assignment, passing address, etc.) on 64-bit archs as well so that any
usage unsafe for 32-bit archs is caught even in software that only
gets tested on 64-bit archs. from what I could gather, there is not
any software using these members anyway. the only reason they need to
be fixed to begin with is that the only members which are commonly
used, the saved registers, follow the time members and have the wrong
offset if the time members are sized incorrectly.

there's only one matching entry for any given command so this had no
functional distinction, but additional loops are pointless and
wasteful.

commit ae388bec accidentally
introduced #define SYSCALL_NO_TLS 1 in mmap.c, which was probably a
stale change left around from unrelated syscall timing measurements.
reverse it.

this commit covers all remaining ioctls I'm aware of that use
time_t-derived types in their interfaces. it may still be incomplete,
and has undergone only minimal testing for a few commands used in
audio playback.

the SNDRV_PCM_IOCTL_SYNC_PTR command is special-cased because, rather
than the whole structure expanding, it has two substructures each
padded to 64 bytes that expand within their own 64-byte reserved zone.
as long as it's the only one of its type, it doesn't really make sense
to make a general framework for it, but the existing table framework
is still used for the substructures in the special-case. one of the
substructures, snd_pcm_mmap_status, has a snd_pcm_uframes_t member
which is not a timestamp but is expanded just like one, to match the
64-bit-arch version of the structure. this is handled just like a
timestamp at offset 8, and is the motivation for the conversions table
holding offsets of individual values to be expanded rather than
timespec/timeval type pairs.

for some of the types, the size to which they expand is dependent on
whether the arch's ABI aligns 8-byte types on 8-byte boundaries.
new_req entries in the table need to reflect this size to get the
right ioctl request number that will match what callers pass, but we
don't have access to the actual structure type definitions here and
duplicating them would be cumbersome. instead, the new_misaligned
macro introduced here constructs an artificial object whose size is
the result of expanding a misaligned timespec/timeval to 64-bit and
imposing the arch's alignment on the result, which can be passed to
the _IO{R,W,WR} macros.

record offsets of individual slots that expand from 32- to 64-bit,
rather than timespec/timeval pairs. this flexibility will be needed
for some ioctls. reduce size of types in table. adjust representation
of offsets to include a count rather than needing -1 padding so that
the table is less ugly and doesn't need large diffs if we increase max
number of slots.

with the current set of supported ioctls, this conversion is hardly an
improvement, but it sets the stage for being able to do alsa, v4l2,
ppp, and other ioctls with timespec/timeval-derived types. without
this capability, a lot of functionality users depend on would stop
working with the time64 switchover.

commit b60fdf13 broke the
SIOCGSTAMP[NS] ioctl fallbacks introduced in commit
2e554617, as well as use of these
ioctls, by creating a situation where bits/ioctl.h could be included
without __LONG_MAX being visible.

always try the time64 syscall first since we can use its success to
conclude that no conversion is needed (any setsockopt for the
timestamp options would have succeeded without need for fallbacks).
otherwise, we have to remember the original controllen for each
msghdr, requiring O(vlen) space, so vlen must be bounded. linux clamps
it to IOV_MAX for sendmmsg only (not recvmmsg), but doing the same for
recvmmsg is not unreasonable, especially since the limitation will
only apply to old kernels.

we could optimize to avoid trying SYS_recvmmsg_time64 first if all
msghdrs have controllen zero, or support unlimited vlen by looping and
emulating the timeout logic, but I'm not inclined to do complex and
error-prone optimizations on a function that has so many underlying
problems it should really never be used.

the definitions of SO_TIMESTAMP* changed on 32-bit archs in commit
38143339 to the new versions that
provide 64-bit versions of timeval/timespec structure in control
message payload. socket options, being state attached to the socket
rather than function calls, are not trivial to implement as fallbacks
on ENOSYS, and support for them was initially omitted on the
assumption that the ioctl-based polling alternatives (SIOCGSTAMP*)
could be used instead by applications if setsockopt fails.

unfortunately, it turns out that SO_TIMESTAMP is sufficiently old and
widely supported that a number of applications assume it's available
and treat errors as fatal.

this patch introduces emulation of SO_TIMESTAMP[NS] on pre-time64
kernels by falling back to setting the "_OLD" (time32) versions of the
options if the time64 ones are not recognized, and performing
translation of the SCM_TIMESTAMP[NS] control messages in recvmsg.
since recvmsg does not know whether its caller is legacy time32 code
or time64, it performs translation for any SCM_TIMESTAMP[NS]_OLD
control messages it sees, leaving the original time32 timestamp as-is
(it can't be rewritten in-place anyway, and memmove would be mildly
expensive) and appending the converted time64 control message at the
end of the buffer. legacy time32 callers will see the converted one as
a spurious control message of unknown type; time64 callers running on
pre-time64 kernels will see the original one as a spurious control
message of unknown type. a time64 caller running on a kernel with
native time64 support will only see the time64 version of the control
message.

emulation of SO_TIMESTAMPING is not included at this time since (1)
applications which use it seem to be prepared for the possibility that
it's not present or working, and (2) it can also be used in sendmsg
control messages, in a manner that looks complex to emulate
completely, and costly even when running on a time64-supporting
kernel.

corresponding changes in recvmmsg are not made at this time; they will
be done separately.

linux/input.h and perhaps others use this macro to determine whether
the userspace time_t is 64-bit when potentially defining types in
terms of time_t and derived structures. the name __USE_TIME_BITS64 is
unfortunate; it really should have been in the __UAPI namespace. but
this is what was chosen back in v4.16 when first preparing input.h for
time64 userspace, presumably based on expectations about what the
glibc-internal features.h macro for time64 would be, and changing it
now would just put a new minimum version requirement on kernel
headers.

the __USE_TIME_BITS64 macro is not intended as a public interface. it
is purely an internal contract between libc and Linux uapi headers.