int8_t, u_int8_t, etc types are moved under _BSD_SOURCE

CONCAT(0x1p,LDBL_MANT_DIG) is not safe outside of libc,
use 2/LDBL_EPSILON instead.

fix was proposed by Morten Welinder.

from linux/in.h and linux/in6.h uapi headers the following
missing socket options were added:

IP_NODEFRAG - used with customized ipv4 headers
IPV6_RECVPATHMTU - for ipv6 path mtu
IPV6_PATHMTU - for ipv6 path mtu
IPV6_DONTFRAG - for ipv6 path mtu
IPV6_ADDR_PREFERENCES - RFC5014 Source Address Selection
IPV6_MINHOPCOUNT - RFC5082 Generalized TTL Security Mechanism
IPV6_ORIGDSTADDR - used by tproxy
IPV6_RECVORIGDSTADDR - used by tproxy
IPV6_TRANSPARENT - used by tproxy
IPV6_UNICAST_IF - ipv6 version of IP_UNICAST_IF

and socket option values:

IP_PMTUDISC_OMIT - value for IP_MTU_DISCOVER option, new in linux 3.14
IPV6_PMTUDISC_OMIT - same for IPV6_MTU_DISCOVER
IPV6_PMTUDISC_INTERFACE - ipv6 version of IP_PMTUDISC_INTERFACE
IPV6_PREFER_* - flags for IPV6_ADDR_PREFERENCES

not added: ipv6 flow info and flow label related definitions.
(it's unclear if libc should define these and namespace polluting
type name is involved so they are not provided for now)

this was introduced to query BPF extension support with getsockopt
in linux 3.14, commit ea02f9411d9faa3553ed09ce0ec9f00ceae9885e

linux 3.14 introduced sched_getattr and sched_setattr syscalls in
commit d50dde5a10f305253cbc3855307f608f8a3c5f73

and the related SCHED_DEADLINE scheduling policy in
commit aab03e05e8f7e26f51dee792beddcb5cca9215a5

but struct sched_attr "extended scheduling parameters data structure"
is not yet exported to userspace (necessary for using the syscalls)
so related uapi definitions are not added yet.

On 32 bit mips the kernel uses -1UL/2 to mark RLIM_INFINITY (and
this is the definition in the userspace api), but since it is in
the middle of the valid range of limits and limits are often
compared with relational operators, various kernel side logic is
broken if larger than -1UL/2 limits are used. So we truncate the
limits to -1UL/2 in get/setrlimit and prlimit.

Even if the kernel side logic consistently treated -1UL/2 as greater
than any other limit value, there wouldn't be any clean workaround
that allowed using large limits:
* using -1UL/2 as RLIM_INFINITY in userspace would mean different
infinity value for get/setrlimt and prlimit (where infinity is always
-1ULL) and userspace logic could break easily (just like the kernel
is broken now) and more special case code would be needed for mips.
* translating -1UL/2 kernel side value to -1ULL in userspace would
mean that -1UL/2 limit cannot be set (eg. -1UL/2+1 had to be passed
to the kernel instead).

using the existence of SYS_stat64 as the condition for remapping other
related syscalls is no longer valid, since new archs that omit the old
syscalls will not have SYS_stat or SYS_stat64, but still potentially
need SYS_fstat and others remapped. it would probably be possible to
get by with just one or two extra conditionals, but just breaking them
all down into separate conditions is robust and not significantly
heavier for the preprocessor.

somehow the remapping of this syscall to the 64-bit version was
overlooked. the issue was found, and patch provided, by Stefan
Kristiansson. presumably the reason this bug was not caught earlier is
that the syscall takes a pointer to off_t rather than a value, so on
little-endian systems, everything appears to work as long as the
offset value fits in the low 31 bits. on big-endian systems, though,
sendfile was presumably completely non-functional.

such archs are expected to omit definitions of the SYS_* macros for
syscalls their kernels lack from arch/$ARCH/bits/syscall.h. the
preprocessor is then able to select the an appropriate implementation
for affected functions. two basic strategies are used on a
case-by-case basis:

where the old syscalls correspond to deprecated library-level
functions, the deprecated functions have been converted to wrappers
for the modern function, and the modern function has fallback code
(omitted at the preprocessor level on new archs) to make use of the
old syscalls if the new syscall fails with ENOSYS. this also improves
functionality on older kernels and eliminates the incentive to program
with deprecated library-level functions for the sake of compatibility
with older kernels.

in other situations where the old syscalls correspond to library-level
functions which are not deprecated but merely lack some new features,
such as the *at functions, the old syscalls are still used on archs
which support them. this may change at some point in the future if or
when fallback code is added to the new functions to make them usable
(possibly with reduced functionality) on old kernels.

calling exit more than once invokes undefined behavior. in some cases
it's desirable to detect undefined behavior and diagnose it via a
predictable crash, but the code here was silently covering up an
uncommon case (exit from more than one thread) and turning a much more
common case (recursive calls to exit) into a permanent hang.

these all now use the shared __randname function internally, rather
than duplicating logic for producing a random name. incorrect usage of
the access syscall (which works with real uid/gid, not effective) has
been removed, along with unnecessary heavy dependencies like snprintf.

this was messed up during a recent commit when the socketcall macros
were moved to the common internal/syscall.h, and the following commit
expanded the problem by adding more new content outside the guard.

this only matters on x32 (and perhaps future 32-on-64 abis for other
archs); otherwise the type is long anyway. the cast through uintptr_t
prevents nonsensical "sign extension" of pointers, and follows the
principle that uintptr_t is the canonical integer type to which
pointer conversion is safe.

open is handled specially because it is used from so many places, in
so many variants (2 or 3 arguments, setting errno or not, and
cancellable or not). trying to do it as a function would not only
increase bloat, but would also risk subtle breakage.

this is the first step towards supporting "new" archs where linux
lacks "old" syscalls.

the main motivation for this change is that, with the previous
definition, it was arguably illegal, in standard C, to initialize both
si_value and si_pid/si_uid with designated initializers, due to the
rule that only one member of a union can have an initializer. whether
or not this affected real-world application code, it affected some
internal code, and clang was producing warnings (and possibly
generating incorrect code).

the new definition uses a more complex hierarchy of structs and unions
to avoid the need to initialize more than one member of a single union
in usage cases that make sense. further work would be needed to
eliminate even the ones with no practical applications.

at the same time, some fixes are made to the exposed names for
nonstandard fields, to match what software using them expects.

%C, %U, %W, and %y handling were completely missing; %C wrongly
fell-through to unrelated cases, and the rest returned failure. for
now, they all parse numbers in the proper forms and range-check the
values, but they do not store the value anywhere.

it's not clear to me whether, as "derived" fields, %U and %W should
produce any result. they certainly cannot produce a result unless the
year and weekday are also converted, but in this case it might be
desirable for them to do so. clarification is needed on the intended
behavior of strptime in cases like this.

%C and %y have well-defined behavior as long as they are used together
(and %y is defined by itself but may change in the future).
implementing them (including their correct interaction) is left as a
later change to be made.

finally, strptime now rejects unknown/invalid format characters
instead of ignoring them.

some of these may have been from ancient (pre-SUSv2) POSIX versions;
more likely, they were from POSIX drafts or glibc interpretations of
what ancient versions of POSIX should have added (instead they made
they described functionality mandatory and/or dropped it completely).
others are purely glibc-isms, many of them ill-thought-out, like
providing ways to lookup the min/max values of types at runtime
(despite the impossibility of them changing at runtime and the
impossibility of representing ULONG_MAX in a return value of type
long).

since our sysconf implementation does not support or return meaningful
values for any of these, it's harmful to have the macros around;
applications' build scripts may detect and attempt to use them, only
to get -1/EINVAL as a result.

if removing them does break some applications, and it's determined
that the usage was reasonable, some of these could be added back on an
as-needed basis, but they should return actual meaningful values, not
junk like they were returning before.

based on patch by Timo Teräs. previously, the value zero was used as a
literal zero, meaning that all invalid sysconf "names", which should
result in sysconf returning -1, had to be explicitly listed. (in
addition, it was not possible for sysconf to set errno to EINVAL, as
there was no distinction between -1 as an error and -1 as a valid
result.)

now, the value 0 is used for invalid/undefined slots in the table and
a new switch table entry is used for returning literal zeros.

in addition, an off-by-one error in checking against the table size is
fixed.

this is gcc bug #61144. the broken compiler is detected, but the user
must manually work around it. this is partly to avoid complex logic
for adding workaround CFLAGS and attempting to recheck with them, and
partly for the sake of letting the user know the compiler is broken
(since the workaround will result in less-efficient code production).

some refactoring was also needed to move the check for gcc outside of
the check for whether to build the compiler wrapper.

perhaps some additional legacy DOS-era codepages would also be useful
to have, but these are the ones for which there has been demand. the
size of the diff is due to the fact that legacychars.h is updated in
such a way that new characters are inserted into the table in unicode
codepoint order; thus other mappings in codepages.h have changed to
reflect the new table indices of their characters.

without this, broken choices of CC/CPPFLAGS/CFLAGS don't show up until
late in the configure process where they are confusingly reported as a
different failure such as incorrect long double type.

this is no longer used for anything, and reportedly clashed with a
builtin on certain compilers.

armv7/thumb2 provides a way to do atomics in thumb mode, but for armv6
we need a call to arm mode.

this commit is based on a patch by Stephen Thomas which fixed the
armv7 cases but not the armv6 ones.

all of this should be revisited if/when runtime selection of thread
pointer access and atomics are added.

As far as gcc3 knows, sh4 is the only processor version that can have an
FPU, so it indicates the FPU's presence by defining __SH4__.  This is not
defined if there is no FPU, even if the processor really is an SH4.

Starting with gcc4, there is support for the sh2a processor, which has an
FPU but is not an SH4.  gcc4 therefore additionally defines __SH_FPU_ANY__
when there is an FPU, but still doesn't define __SH4__ for an FPU-less sh4.

Therefore, to support all gcc versions, we must look at both preprocessor
symbols.

previously, setting TZ to the pathname of a file which was not a valid
zoneinfo file would usually cause programs using local time zone based
operations to crash. the new code checks the file size and magic at
the beginning of the file, which seems sufficient to prevent
accidental misconfiguration from causing crashes. attempting to make
fully-robust validation would be futile unless we wanted to drop use
of mmap (shared zoneinfo) and instead read it into a local buffer,
since such validation would be subject to race conditions with
modification of the file.

being static allows it to be inlined in __libc_start_main; inlining
should take place at all levels since the function is called exactly
once. this further reduces mandatory startup code size for static
binaries.

there is no reason (and seemingly there never was any) for
__init_security to be its own function. it's linked unconditionally
so it can just be placed inline in __init_libc.

moving the call to __init_ssp from __init_security to __init_libc
makes __init_security a leaf function, which allows the compiler to
make it smaller. __init_libc is already non-leaf, and the additional
call makes no difference to the amount of register spillage.

in addition, it really made no sense for the call to __init_ssp to be
buried inside __init_security rather than parallel with other init
functions.

since the form TZ=name is reserved for POSIX-form time zone strings,
TZ=:name needs to be used when the zoneinfo filename is in the
top-level zoneinfo directory and therefore does not contain a slash.
previously the leading colon was merely dropped, making it impossible
to access such zones without a full absolute pathname.

changes based on patch by Timo Teräs.

in cases where the memorized match range from the right factor
exceeded the length of the left factor, it was wrongly treated as a
mismatch rather than a match.

issue reported by Yves Bastide.