a common code path in j1 and y1 was factored out so the resulting
object code is a bit smaller

unsigned int arithmetics is used for bit manipulation

j1(-inf) now returns 0 instead of -0

an incorrect threshold in the common code of j1f and y1f got fixed
(this caused spurious overflow and underflow exceptions)

the else branch in pone and pzero functions are fixed
(so code analyzers dont warn about uninitialized values)

a common code path in j0 and y0 was factored out so the resulting
object code is smaller

unsigned int arithmetics is used for bit manipulation

the logic of j0 got a bit simplified (x < 1 case was handled
separately with a bit higher precision than now, but there are large
errors in other domains anyway so that branch has been removed)

some threshold values were adjusted in j0f and y0f

reported/requested by Strake; simplified from the provided patch

the old definitions were wrong on some archs. actually, EPOLL_NONBLOCK
probably should not even be defined; it is not accepted by the kernel
and it's not clear to me whether it has any use at all, even if it did
work. this issue should be revisited at some point, but I'm leaving it
in place for now in case some applications reference it.

the POLL prefix is in the reserved namespace for poll.h, so no feature
test macro checks are needed.

libc is the macro, __libc is the internal symbol, but under some
configurations on old/broken compilers, the symbol might not actually
exist and the libc macro might instead use __libc_loc() to obtain
access to the object.

the previous logic was assuming the kernel would give EINVAL when
passed an invalid address, but instead with MAP_FIXED it was giving
EPERM, as it considered this an attempt to map over kernel memory.
instead of trying to get the kernel to do the rigth thing, the new
code just handles the error in userspace.

I have also cleaned up the code to use a single mask to check for
invalid low bits and unsupported high bits, so it's simpler and more
clearly correct. the old code was actually wrong for sizeof(long)
smaller than sizeof(off_t) but not equal to 4; now it should be
correct for all possibilities.

for 64-bit systems, the low-bits test is new and extraneous (the
kernel should catch the error anyway when the mmap2 syscall is not
used), but it's cheap anyway. if this is an issue, the OFF_MASK
definition could be tweaked to omit the low bits when SYS_mmap2 is not
defined.

__IS_FP is a portable integer constant expression now
(uses that unsigned long long is larger than float)
the result casting logic should work now on all compilers
supporting typeof

this is already implemented in the dynliker (see struct debug),
but was not exposed.
we need it to do so to make wine happy...

* return type logic is simplified a bit and fixed (see below)
* return type of conj and cproj were wrong on int arguments
* added comments about the pending issues
(usually we don't have comments in public headers but this is
not the biggest issue with tgmath.h)

casting the result to the right type cannot be done in c99
(c11 _Generic can solve this but that is not widely supported),
so the typeof extension of gcc is used and that the ?: operator
has special semantics when one of the operands is a null
pointer constant

the standard is very strict about the definition of null
pointer constants so typeof with ?: is still not enough so
compiler specific workaround is used for now

on gcc '!1.0' is a null pointer constant so we can use the old
__IS_FP logic (eventhough it's non-standard)

on clang (and on gcc as well) 'sizeof(void)-1' is a null
pointer constant so we can use
 !(sizeof(*(0?(int*)0:(void*)__IS_FP(x)))-1)
(this is non-standard as well), the old logic is used by
default and this new one on clang

previously 0x1p-1000 and 0x1p1000 was used for raising inexact
exception like x+tiny (when x is big) or x+huge (when x is small)

the rational is that these float consts are large enough
(0x1p-120 + 1 raises inexact even on ld128 which has 113 mant bits)
and float consts maybe smaller or easier to load on some platforms
(on i386 this reduced the object file size by 4bytes in some cases)

this is not a full rewrite just fixes to the special case logic:
+-0 and non-integer x<INT_MIN inputs incorrectly raised invalid
exception and for +-0 the return value was wrong

so integer test and odd/even test for negative inputs are changed
and a useless overflow test was removed

comments are kept in the double version of the function

compared to fdlibm/freebsd we partition the domain into one
more part and select different threshold points:
now the [log(5/3)/2,log(3)/2] and [log(3)/2,inf] domains
should have <1.5ulp error
(so only the last bit may be wrong, assuming good exp, expm1)

(note that log(3)/2 and log(5/3)/2 are the points where tanh
changes resolution: tanh(log(3)/2)=0.5, tanh(log(5/3)/2)=0.25)

for some x < log(5/3)/2 (~=0.2554) the error can be >1.5ulp
but it should be <2ulp
(the freebsd code had some >2ulp errors in [0.255,1])

even with the extra logic the new code produces smaller
object files

comments are kept in the double version of the function

changed the algorithm: large input is not special cased
(when exp(-x) is small compared to exp(x))
and the threshold values are reevaluated
(fdlibm code had a log(2)/2 cutoff for which i could not find
justification, log(2) seems to be a better threshold and this
was verified empirically)

the new code is simpler, makes smaller binaries and should be
faster for common cases

the old comments were removed as they are no longer true for the
new algorithm and the fdlibm copyright was dropped as well
because there is no common code or idea with the original anymore
except for trivial ones.

these are not specified in the standard, but in the reserved
namespace, so there is no problem with defining them unconditionally.

with naive exp2l(x*log2e) the last 12bits of the result was incorrect
for x with large absolute value

with hi + lo = x*log2e is caluclated to 128 bits precision and then
  expl(x) = exp2l(hi) + exp2l(hi) * f2xm1(lo)
this gives <1.5ulp measured error everywhere in nearest rounding mode

in tgmath.h the return values are casted to the appropriate
floating-point type (if the compiler supports gcc __typeof__),
this is wrong in case of ilogb, lrint, llrint, lround, llround
which do not need such cast

uses the lanczos approximation method with the usual tweaks.
same parameters were selected as in boost and python.
(avoides some extra work and special casing found in boost
so the precision is not that good: measured error is <5ulp for
positive x and <10ulp for negative)

an alternative lgamma_r implementation is also given in the same
file which is simpler and smaller than the current one, but less
precise so it's ifdefed out for now.

do fabs by hand, don't check for nan and inf separately

__invtrigl is not needed when acosl, asinl, atanl have asm
implementations

modifications:
* avoid unsigned->signed conversions
* removed various volatile hacks
* use FORCE_EVAL when evaluating only for side-effects
* factor out R() rational approximation instead of manual inline
* __invtrigl.h now only provides __invtrigl_R, __pio2_hi and __pio2_lo
* use 2*pio2_hi, 2*pio2_lo instead of pi_hi, pi_lo

otherwise the logic is not changed, long double versions will
need a revisit when a genaral long double cleanup happens

modifications:
* avoid unsigned->signed integer conversion
* do not handle special cases when they work correctly anyway
* more strict threshold values (0x1p26 instead of 0x1p28 etc)
* smaller code, cleaner branching logic
* same precision as the old code:
    acosh(x) has up to 2ulp error in [1,1.125]
    asinh(x) has up to 1.6ulp error in [0.125,0.5], [-0.5,-0.125]
    atanh(x) has up to 1.7ulp error in [0.125,0.5], [-0.5,-0.125]

j0l,j1l,jnl,y0l,j1l,jnl are gnu extensions, bsd and posix do not
have them.
noone seems to use them and there is no plan to implement them any
time soon so we shouldn't declare them in math.h.

this bug seems to have caused any failure by pipe2 on such systems to
set errno to 1, rather than the proper error code.

despite glibc using __key and __seq rather than key and seq, some
applications, notably busybox, assume the names are key and seq unless
glibc is being used. and the names key and seq are really the ones
that _should_ be exposed when not attempting to present a
standards-conforming namespace; apps should not be using names that
begin with double-underscore. thus, the optimal fix is to use key and
seq as the actual names of the members when in bsd/gnu source profile,
and define macros for __key and __seq that redirect to plain key and
seq.