the character sequence '$((' was incorrectly interpreted as the
opening of arithmetic even within single-quoted contexts, thereby
suppressing the checks for bad characters after the closing quote.

presently bad character checking is only performed when the WRDE_NOCMD
is used; this patch only corrects checking in that case.

this allows getpwnam and getpwuid to share code with the _r versions
in preparation for alternate backend support.

The code does a potentially misaligned 8-byte store to fill the tail
of the buffer. Then it fills the initial part of the buffer
which is a multiple of 8 bytes.
Therefore, if size is divisible by 8, we were storing last word twice.

This patch decrements byte count before dividing it by 8,
making one less store in "size is divisible by 8" case,
and not changing anything in all other cases.
All at the cost of replacing one MOV insn with LEA insn.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>

"and $0xff,%esi" is a six-byte insn (81 e6 ff 00 00 00), can use
4-byte "movzbl %sil,%esi" (40 0f b6 f6) instead.

64-bit imul is slow, move it as far up as possible so that the result
(rax) has more time to be ready by the time we start using it
in mem stores.

There is no need to shuffle registers in preparation to "rep movs"
if we are not going to take that code path. Thus, patch moves
"jump if len < 16" instructions up, and changes alternate code path
to use rdx and rdi instead of rcx and r8.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>

this syscall allows fexecve to be implemented without /proc, it is new
in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874
(sh and microblaze do not have allocated syscall numbers yet)

added a x32 fix as well: the io_setup and io_submit syscalls are no
longer common with x86_64, so use the x32 specific numbers.

these socket options are new in linux v3.19, introduced in commit
2c8c56e15df3d4c2af3d656e44feb18789f75837 and commit
89aa075832b0da4402acebd698d0411dcc82d03e

with SO_INCOMING_CPU the cpu can be queried on which a socket is
managed inside the kernel and optimize polling of large number of
sockets accordingly.

SO_ATTACH_BPF lets eBPF programs (created by the bpf syscall) to
be attached to sockets.

the name was recently added for the setxid/synccall rework,
so use the name now that we have it.

just defining the necessary constants:

 LD_B1B_MAX is 2^113 - 1 in base 10^9
 KMAX is 2048 so the x array can hold up to 18432 decimal digits

(the worst case is converting 2^-16495 = 5^16495 * 10^-16495 to
binary, it requires the processing of int(log10(5)*16495)+1 = 11530
decimal digits after discarding the leading zeros, the conversion
requires some headroom in x, but KMAX is more than enough for that)

However this code is not optimal on archs with IEEE binary128
long double because the arithmetics is software emulated (on
all such platforms as far as i know) which means big and slow
strtod.

This trivial copy-paste bug went unnoticed due to lack of testing.
No currently supported target archs are affected.

armhf fesetenv implementation did a useless read of the fpscr.

mips fesetenv did not handle FE_DFL_ENV, now fcsr is cleared in that
case.

The sign bit was not cleared before checking for 0 so -0.0
was misclassified as FP_SUBNORMAL instead of FP_ZERO.

all socket types are accepted at this point, but that may be changed
at a later time if the behavior is not meaningful for other types. as
before, omitting type (a value of 0) gives both UDP and TCP results,
and SOCK_DGRAM or SOCK_STREAM restricts to UDP or TCP, respectively.
for other socket types, the service name argument is required to be a
null pointer, and the protocol number provided by the caller is used.

x86_64 syscall.h defined some musl internal syscall names and made
them public. These defines were already moved to src/internal/syscall.h
(except for SYS_fadvise which is added now) so the cruft in x86_64
syscall.h is not needed.

in the case where a non-symlink file was replaced by a symlink during
the fchmodat operation with AT_SYMLINK_NOFOLLOW, mode change on the
new symlink target was successfully suppressed, but the error was not
reported. instead, fchmodat simply returned 0.

the specification for execvp itself is unclear as to whether
encountering a file that cannot be executed due to EACCES during the
PATH search is a mandatory error condition; however, XBD 8.3's
specification of the PATH environment variable clarifies that the
search continues until a file with "appropriate execution permissions"
is found.

since it seems undesirable/erroneous to report ENOENT rather than
EACCES when an early path element has a non-executable file and all
later path elements lack any file by the requested name, the new code
stores a flag indicating that EACCES was seen and sets errno back to
EACCES in this case.

in practice this was probably a non-issue, because the necessary
barrier almost certainly exists in kernel space -- implementing signal
delivery without such a barrier seems impossible -- but for the sake
of correctness, it should be done here too.

in principle, without a barrier, it is possible that the thread to be
cancelled does not see the store of its cancellation flag performed by
another thread. this affects both the case where the signal arrives
before entering the critical program counter range from __cp_begin to
__cp_end (in which case both the signal handler and the inline check
fail to see the value which was already stored) and the case where the
signal arrives during the critical range (in which case the signal
handler should be responsible for cancellation, but when it does not
see the cancellation flag, it assumes the signal is spurious and
refuses to act on it).

in the fix, the barrier is placed only in the signal handler, not in
the inline check at the beginning of the critical program counter
range. if the signal handler runs before the critical range is
entered, it will of course take no action, but its barrier will ensure
that the inline check subsequently sees the store. if on the other
hand the inline check runs first, it may miss seeing the store, but
the subsequent signal handler in the critical range will act upon the
cancellation request. this strategy avoids adding a memory barrier in
the common, non-cancellation code path.

mxcs_mask should be mxcr_mask

these are mandatory cancellation points per POSIX, so their omission
was a conformance bug.

the definitions are generic for all kernel archs. exposure of these
macros now only occurs on the same feature test as for the function
accepting them, which is believed to be more correct.

this typo did not result in an erroneous setjmp with at least binutils
2.22 but fix it for clarity and compatibility with potentially stricter
sh assemblers.

the errno values are unused by the kernel and the macro definitions were
never exposed by glibc.

based on patch by Vadim Ushakov. in general overriding LC_ALL rather
than specific categories (here, LC_MESSAGES) is undesirable, but
LC_ALL is easier and in this case there is nothing else that depends
on the locale in this invocation of the compiler.

when using /etc/shadow (rather than tcb) as its backend, getspnam_r
matched any username starting with the caller-provided string rather
than requiring an exact match. in practice this seems to have affected
only systems where one valid username is a prefix for another valid
username, and where the longer username appears first in the shadow
file.

as a result of commit e8e4e56a,
the later code path for setting optarg to a null pointer is no longer
necessary, and removing it eliminates an indention level and arguably
makes the code more readable.

the standard getopt does not touch optarg unless processing an option
with an argument. however, programs using the GNU getopt API, which we
attempt to provide in getopt_long, expect optarg to be a null pointer
after processing an option without an argument.

before argument permutation support was added, such programs typically
detected its absence and used their own replacement getopt_long,
masking the discrepency in behavior.

multi-threaded set*id and setrlimit use the internal __synccall
function to work around the kernel's wrongful treatment of these
process properties as thread-local. the old implementation of
__synccall failed to be AS-safe, despite POSIX requiring setuid and
setgid to be AS-safe, and was not rigorous in assuring that all
threads were caught. in a worst case, threads late in the process of
exiting could retain permissions after setuid reported success, in
which case attacks to regain dropped permissions may have been
possible under the right conditions.

the new implementation of __synccall depends on the presence of
/proc/self/task and will fail if it can't be opened, but is able to
determine that it has caught all threads, and does not use any locks
except its own. it thereby achieves AS-safety simply by blocking
signals to preclude re-entry in the same thread.

with this commit, all known conformance and safety issues in set*id
functions should be fixed.

per POSIX, the EINTR condition is an optional error for these
functions, not a mandatory one. since old kernels (pre-2.6.22) failed
to honor SA_RESTART for the futex syscall, it's dangerous to trust
EINTR from the kernel. thankfully POSIX offers an easy way out.

in the current version of __synccall, the callback is always run, so
failure to handle this case did not matter. however, the upcoming
overhaul of __synccall will have failure cases, in which case the
callback does not run and errno is already set. the changes being
committed now are in preparation for that.

this addresses alpine linux issue #3692 and brings the syslog message
length limit in alignment with uclibc's implementation.

the code being removed was introduced to work around "partial failure"
of multi-threaded set*id() operations, where some threads would
succeed in changing their ids but an RLIMIT_NPROC setting would
prevent the rest from succeeding, leaving the process in an
inconsistent and dangerous state. however, the workaround code did not
handle important usage cases like swapping real and effective uids
then restoring their original values, and the wrongful kernel
enforcement of RLIMIT_NPROC at setuid time was removed in Linux 3.1,
making the workaround obsolete.

since the partial failure still is dangerous on old kernels, and could
in principle happen on post-fix kernels as well if set*id() syscalls
fail for another spurious reason such as resource-related failures,
new code is added to detect and forcibly kill the process if/when such
a situation arises. future documentation releases should be updated to
reflect that setting RLIMIT_NPROC to RLIM_INFINITY is necessary to
avoid this forced-kill on old kernels. ideally, at some point the
kernel will get proper multi-threaded set*id() syscalls capable of
performing their actions atomically, and all of the userspace code to
emulate them can be treated as a fallback for outdated kernels.

opening /dev/tty then using ttyname_r on it does not produce a
canonical terminal name; it simply yields "/dev/tty".

it would be possible to make ctermid determine the actual controlling
terminal device via field 7 of /proc/self/stat, but doing so would
introduce a buffer overflow into applications built with L_ctermid==9,
which glibc defines, adversely affecting the quality of ABI compat.

commit b72cd07f added support for a
this feature in getopt, but it was later broken in the case where
getopt_long is used as a side effect of the changes made in commit
91184c4f, which prevented the
underlying getopt call from seeing the leading '-' or '+' character in
optstring.

this commit changes the logic in the getopt_long core to check for a
leading colon, possibly after the leading '-' or '+', without
depending on the latter having been skipped by the caller. a minor
incorrectness in the return value for one error condition in
getopt_long is also fixed when opterr has been set to zero but
optstring has no leading ':'.

based on patch by Dima Krasner, with minor improvements for code size.
connect can fail if there is no listening syslogd, in which case a
useless socket was kept open, preventing subsequent syslog call from
attempting to connect again.

PR_SET_MM_MAP was introduced as a subcommand for PR_SET_MM in
linux v3.18 commit f606b77f1a9e362451aca8f81d8f36a3a112139e

the associated struct type is replicated in sys/prctl.h using
libc types.

example usage:

 struct prctl_mm_map *p;
 ...
 prctl(PR_SET_MM, PR_SET_MM_MAP, p, sizeof *p);

the kernel side supported struct size may be queried with
the PR_SET_MM_MAP_SIZE subcommand.