- 03 11月, 2019 9 次提交
-
-
由 Rich Felker 提交于
these definitions are copied from generic bits/ioctl.h, so that x32 keeps the "_OLD" versions (which are already time64 on x32) when 32-bit archs switch to 64-bit time_t.
-
由 Rich Felker 提交于
these definitions are merely copied from the top-level sys/socket.h, so there is no functional change at this time. however, the top-level definitions will change to use the time64 "_NEW" versions on 32-bit archs when time_t is switched over to 64-bit. this commit ensures that change will be suppressed on x32.
-
由 Rich Felker 提交于
these structures can now be defined generically in terms of endianness and long size. previously, the 32-bit archs all shared a common definition from the generic bits header, and each 64-bit arch had to repeat the 64-bit version, with endian conditionals if the arch had variants of each endianness. I would prefer getting rid of the preprocessor conditionals for padding and instead using unnamed bitfield members, like commit 9b2921be did for struct timespec. however, at present sendmsg, recvmsg, and recvmmsg need access to the padding members by name to zero them. this could perhaps be cleaned up in the future.
-
由 Rich Felker 提交于
being that it contains pointers and (from the kernel perspective, which is wrong) size_t members, x32 uses the 32-bit version of the structure, not a half-32-bit, half-64-bit layout like we had here. the x86_64 definition was inadvertently copied when x32 was first added. unlike errors in the opposite direction (missing padding), this error was not easily detected breakage, because the layout of the commonly used initial subset of members still matched. breakage could only be observed in the presence of control messages or flags.
-
由 Rich Felker 提交于
SO_RCVTIMEO and SO_SNDTIMEO already were, but only in aggregate with SO_DEBUG and all of the other low/traditional options that varied per arch. SO_TIMESTAMP* are newly overridable. the two groups have to be done separately since mips64 and powerpc64 will override the former but not the latter. at some point this should be cleaned up to use bits headers more idiomatically.
-
由 Rich Felker 提交于
the immediate usage case for this is to let 32-bit archs moving to 64-bit time_t via symbol redirection pull in wrapper shims that provide the old symbol names. in the future it may be used for other types of compatibility-only source files that are not relevant to all archs.
-
由 Rich Felker 提交于
-
由 Rich Felker 提交于
if symbols are being redirected to provide the new time64 ABI, dlsym must perform matching redirections; otherwise, it would poke a hole in the magic and return pointers to functions that are not safe to call from a caller using time64 types. rather than duplicating a table of redirections, use the time64 symbols present in libc's symbol table to derive the decision for whether a particular symbol needs to be redirected.
-
由 Rich Felker 提交于
these files provide the symbols for the traditional 32-bit time_t ABI on existing 32-bit archs by wrapping the real, internal versions of the corresponding functions, which always work with 64-bit time_t. they are written to be as agnostic as possible to the implementation details of the real functions, so that they can be written once and mostly forgotten, but they are aware of details of the old (and sometimes new) ABI, which is okay since ABI is fixed and cannot change. a new compat tree is added, separate from src, which the Makefile does not see or use now, but which archs will be able to add to the build process. we could also consider moving other things that are compat shims here, like functions which are purely for glibc-ABI-compat, with the goal of making it optional or just cleaning up the main src tree to make the distinction between actual implementation/API files and ABI-compat shims clear.
-
- 29 10月, 2019 5 次提交
-
-
由 Rich Felker 提交于
here _REDIR_TIME64 is used as an indication that there's an old ABI, and thereby the old time32 timespec fields of struct stat. keeping struct stat compatible and providing both versions of the timespec fields is done so that ftw/nftw does not need painful compat shims, and (more importantly) so that similar interfaces between pairs of libc consumers (applications/libraries) will be less likely to break when one has been rebuilt for time64 but the other has not.
-
由 Rich Felker 提交于
these functions cannot provide the glibc lfs64-ABI-compatible symbols when time_t differs from what it was in that ABI. instead, the aliases need to be provided by the time32 compat shims or through some other mechanism.
-
由 Rich Felker 提交于
the time_t members in struct sched_param are just reserved space to preserve size and alignment. when time_t changes to 64-bit on 32-bit archs, this structure should not change. make definition conditional on _REDIR_TIME64 to match the size of the old time_t, which can be assumed to be long if _REDIR_TIME64 is defined.
-
由 Rich Felker 提交于
a _REDIR_TIME64 macro is introduced, which the arch's alltypes.h is expected to define, to control redirection of symbol names for interfaces that involve time_t and derived types. this ensures that object files will only be linked to libc interfaces matching the ABI whose headers they were compiled against. along with time32 compat shims, which will be introduced separately, the redirection also makes it possible for a single libc (static or shared) to be used with object files produced with either the old (32-bit time_t) headers or the new ones after 64-bit time_t switchover takes place. mixing of such object files (or shared libraries) in the same program will also be possible, but must be done with care; ABI between libc and a consumer of the libc interfaces is guaranteed to match by the the symbol name redirection, but pairwise ABI between consumers of libc that define interfaces between each other in terms of time_t is not guaranteed to match. this change adds a dependency on an additional "GNU C" feature to the public headers for existing 32-bit archs, which is generally undesirable; however, the feature is one which glibc has depended on for a long time, and thus which any viable alternative compiler is going to need to provide. 64-bit archs are not affected, nor will future 32-bit archs be, regardless of whether they are "new" on the kernel side (e.g. riscv32) or just newly-added (e.g. a new sparc or xtensa port). the same applies to newly-added ABIs for existing machine-level archs.
-
由 Rich Felker 提交于
-
- 26 10月, 2019 4 次提交
-
-
由 Rich Felker 提交于
-
由 u_quark 提交于
-
由 Rich Felker 提交于
the existing implementation of case mappings was very small (typically around 1.5k), but unmaintainable, requiring manual addition of new case mappings with each new edition of Unicode. often, it turned out that newly-added case mappings were not easily representable in the existing tightly-constrained table structures, requiring new hacks to be invented and delaying support for new characters. the new implementation added here follows the pattern used for character class membership, with a two-level table allowing Unicode blocks for which no data is needed to be elided. however, rather than single-bit data, each character maps to a one of up to 6 case-mapping rules available to its block, where 6 is floor(cbrt(256)) and allow 3 characters to be represented per byte (vs 8 with bit tables). blocks that would need more than 6 rules designate one as an exception and let lookup pass into a binary search of exceptional cases for the block. the number 6 was chosen empirically; many blocks would be ok with 4 rules (uncased, lower, upper, possible exceptions), some even just with 2, but the latter are rare and fitting 4 characters per byte rather than 3 does not save significant space. moreover, somewhat surprisingly, there are sufficiently many blocks where even 4 rules don't suffice without a lot of exceptions (blocks where some case pairs are laced, others offset) that originally I was looking at supporting variable-width tables, with 1-, 2-, or 3-bit entries, thereby allowing blocks with 8 rules. as implemented in my experiments, that version was significantly larger and involved more memory accesses/cache lines. improvements in size at the expense of some performance might be possible by utilizing iswalpha data or merging the table of case mapping identity with alphabetic identity. these were explored somewhat when the code was first written, and might be worth revisiting in the future.
-
由 Rich Felker 提交于
somehow this seems to have been overlooked. add it now so that subsequent overhaul of case mapping implementation will not introduce a functional change at the same time.
-
- 24 10月, 2019 1 次提交
-
-
由 Rich Felker 提交于
linux fails the open with ENOSPC, but POSIX mandates EAGAIN.
-
- 20 10月, 2019 6 次提交
-
-
由 Rich Felker 提交于
for time64 support on 32-bit archs, the kernel interfaces use a timespec layout padded to match the representation of a pair of 64-bit values, which requires endian-specific padding. use of an ordinary, non-bitfield, named member for the padding is undesirable because, on big endian archs, it would alter the interpretation of traditional (non-designated) initializers of the form {s,ns}, initializing the padding instead of the tv_nsec member. unnamed bitfield members solve this problem by not taking part in initialization, and were the expected solution when the kernel interfaces were designed. however, they also have further advantages which we take advantage of here: positioning of the padding could be controlled by having a preprocessor conditional with separate definitions of struct timespec for little and big endian, but whether padding should appear at all is a function of whether time_t is larger than long. this condition is not something the preprocessor can determine unless we were to define a new macro specifically for that purpose. by using unnamed bitfield members instead of ordinary named members, we can arrange for the size of the padding to collapse to zero when it should not be present, just by using sizeof(time_t) and sizeof(long) in the bitfield width expression, which can be any integer constant expression.
-
由 Rich Felker 提交于
commit 2b4fd6f7 added time64 for this function, but did so with a hidden assumption that the new time64 version of struct timex will be layout-compatible with the old one. however, there is little benefit to doing it that way, and the cost is permanent special-casing of 32-bit archs with 64-bit time_t in the public interface definitions. instead, do a full translation of the structure going in and out. this commit is actually a revision to an earlier uncommited version of the code.
-
由 Rich Felker 提交于
presently the kernel does not actually define time64 versions of these syscalls, and they're not really needed except to represent extreme cpu time usage. however, x32's versions of the syscalls already behave as time64 ones, meaning the functions were broken on x32 if the caller used any part of the rusage result other than ru_utime and ru_stime. commit 7e817114 made it possible to fix this by treating x32's syscalls as time64 versions. in the non-time64-syscall case, make the syscall with the rusage destination pointer adjusted so that all members but the timevals line up between the libc and kernel structures. on 64-bit archs, or present 32-bit archs with 32-bit time_t, the timevals will line up too and no further work is needed. for future 32-bit archs with 64-bit time_t, the timevals are copied into place, contingent on time_t being larger than long.
-
由 Rich Felker 提交于
this is analogous to commit 40aa18d5. so far, there are not any actual time64 versions of the rusage syscalls (getrusage and wait4) and might never be. however, the existing x32 ones behave the way time64 versions would if they existed: using 64-bit slots in place of all longs. presently, wait4 and getrusage are broken on x32, storing the timevals correctly but messing up everything else due to the long/kernel-long mismatch. this would be a huge buffer overflow if not for the 16 reserved slots we left long ago, which suffice to prevent 14 double-sized longs from overflowing into unrelated memory. this commit will make it possible to fix them.
-
由 Rich Felker 提交于
this is to match the kernel and glibc interfaces. here, struct pt_regs is an incomplete type, but that's harmless, and if it's completed by inclusion of another header then members of the struct pointed to by the regs member can be accessed directly without going through a cast or intermediate pointer object.
-
由 Rich Felker 提交于
the userspace ucontext API has this as an array rather than a structure. commit 3c59a868 fixed the corresponding mistake for vrregset_t, namely that the original powerpc64 port used a mix of types from 32-bit powerpc and powerpc64 rather than matching the 64-bit types.
-
- 19 10月, 2019 2 次提交
-
-
由 Rich Felker 提交于
aside from the special value EOF, ungetc is specified to accept and convert values outside the range of unsigned char. conversion takes place automatically as part of assignment when storing into the buffer, but the return value is also required to be the resulting converted value, and this requirement was not satisfied. simplified from patch by Wang Jianjian.
-
由 Rich Felker 提交于
based on patch by Dan Gohman, who caught this via compiler warnings. analysis by Szabolcs Nagy determined that it's a bug, whereby errno can be set incorrectly for values where the coercion from long double to double causes rounding. it seems likely that floating point status flags may be set incorrectly as a result too. at the same time, clean up use of preprocessor concatenation involving LDBL_MANT_DIG, which spuriously depends on it being a single unadorned decimal integer literal, and instead use the equivalent formulation 2/LDBL_EPSILON. an equivalent change on the printf side was made in commit bff6095d.
-
- 18 10月, 2019 8 次提交
-
-
由 Rich Felker 提交于
policy has long been that these definitions are purely a function of whether long/pointer is 32- or 64-bit, and that they are not allowed to vary per-arch. move the definition to the shared alltypes.h.in fragment, using integer constant expressions in terms of sizeof to vary the array dimensions appropriately. I'm not sure whether this is more or less ugly than using preprocessor conditionals and two sets of definitions here, but either way is a lot less ugly than repeating the same thing for every arch.
-
由 Rich Felker 提交于
LLONG_MAX is uniform for all archs we support and plenty of header and code level logic assumes it is, so it does not make sense for limits.h bits mechanism to pretend it's variable. LONG_BIT can be defined in terms of LONG_MAX; there's no reason to put it in bits. by moving LONG_MAX definition to __LONG_MAX in alltypes.h and moving LLONG_MAX out of bits, there are now no plain-C limits that are defined in the bits header, so the bits header only needs to be included in the POSIX or extended profiles. this allows the feature test macro logic to be removed from the bits header, facilitating a long-term goal of getting such logic out of bits. having __LONG_MAX in alltypes.h will allow further generalization of headers. archs without a constant PAGESIZE no longer need bits/limits.h at all.
-
由 Rich Felker 提交于
the resolution of Austin Group issue #162 adds endian.h as a standard header for future versions of the standard, making it no longer acceptable for some of the functionality to be hidden behind _BSD_SOURCE or _GNU_SOURCE. the definitions of the [lb]etoh{16,32,64} function-like macros are kept conditional since they are alternate names which the standard did not adopt.
-
由 Rich Felker 提交于
building on commit 97d35a55, __BYTE_ORDER is now available wherever alltypes.h is included. since reloc.h is only used from src/internal/dynlink.h, it can be assumed that __BYTE_ORDER is exposed. reloc.h is not permitted to be included in other contexts, and generally, like most arch headers, lacks inclusion guards that would allow such usage. the mips64 version mistakenly included such guards; they are removed for consistency.
-
由 Rich Felker 提交于
building on commit 97d35a55, __BYTE_ORDER is now available wherever alltypes.h is included. endian.h should not be used since, in the future, it will expose identifiers that are not in the reserved namespace for the headers which were previously using it.
-
由 Rich Felker 提交于
this change is motivated by the intersection of several factors. presently, despite being a nonstandard header, endian.h is exposing the unprefixed byte order macros and functions only if _BSD_SOURCE or _GNU_SOURCE is defined. this is to accommodate use of endian.h from other headers, including bits headers, which need to define structure layout in terms of endianness. with time64 switch-over, even more headers will need to do this. at the same time, the resolution of Austin Group issue 162 makes endian.h a standard header for POSIX-future, requiring that it expose the unprefixed macros and the functions even in standards-conforming profiles. changes to meet this new requirement would break existing internal usage of endian.h by causing it to violate namespace where it's used. instead, have the arch's alltypes.h define __BYTE_ORDER, either as a fixed constant or depending on the right arch-specific predefined macros for determining endianness. explicit literals 1234 and 4321 are used instead of __LITTLE_ENDIAN and __BIG_ENDIAN so that there's no danger of getting the wrong result if a macro is undefined and implicitly evaluates to 0 at the preprocessor level. the powerpc (32-bit) bits/endian.h being removed had logic for varying endianness, but our powerpc arch has never supported that and has always been big-endian-only. this logic is not carried over to the new __BYTE_ORDER definition in alltypes.h.
-
由 Rich Felker 提交于
now that commit f7f10797 removed the legacy i386 conditional definition, va_list is in no way arch-specific, and has no reason to be in the future. move it to the shared part of alltypes.h.in
-
由 Rich Felker 提交于
commit ffaaa6d2 removed the corresponding stdarg.h support for compilers without va_list builtins, but failed to remove the alternate type definition, leaving incorrect va_list definitions in place with compilers that don't define __GNUC__ with a value >= 3.
-
- 14 10月, 2019 5 次提交
-
-
由 info@mobile-stream.com 提交于
SQRT.fmt exists on MIPS II+ (float), MIPS III+ (double). ABS.fmt exists on MIPS I+ but only cores with ABS2008 flag in FCSR implement the required behaviour.
-
由 Michael Morrell 提交于
-
由 Rich Felker 提交于
-
由 Szabolcs Nagy 提交于
Both sqrt and sqrtf shifted the signed exponent as signed int to adjust the bit representation of the result. There are signed right shifts too in the code but those are implementation defined and are expected to compile to arithmetic shift on supported compilers and targets.
-
由 Rich Felker 提交于
mbsrtowcs contains "vectorized" loops to quickly step over bytes without the high bit set; these have undefined behavior by virtue of aliasing uint32_t over top of char data for the accesses. commit 4d0a8217 fixed the corresponding usage in string functions by using the may_alias attribute conditional on __GNUC__ and disabled the vectorized code in its absence. do the same for mbsrtowcs.
-