since the backend for LOCK() skips locking if single-threaded, it's
unsafe to make the process appear single-threaded before the last use
of lock.

this fixes potential unsynchronized access to a linked list via
__dl_thread_cleanup.

signal 7 is SIGEMT on Linux mips* ABI according to the man pages and
kernel. it's not clear where the wrong name came from but it dates
back to original mips commit.

presently all archs define SIGSTKFLT but this is not correct. change
strsignal as a prerequisite for fixing that.

the internal __res_msend returns 0 on timeout without having obtained
any conclusive answer, but in this case has not filled in meaningful
anslen. res_send wrongly treated that as success, but returned a zero
answer length. any reasonable caller would eventually end up treating
that as an error when attempting to parse/validate it, but it should
just be reported as an error.

alternatively we could return the last-received inconclusive answer
(typically servfail), but doing so would require internal changes in
__res_msend. this may be considered later.

the old logic here likely dates back, at least in inspiration, to
before it was recognized that transient errors must not be allowed to
reflect the contents of successful results and must be reported to the
application.

here, the dns backend for getaddrinfo, when performing a paired query
for v4 and v6 addresses, accepted results for one address family even
if the other timed out. (the __res_msend backend does not propagate
error rcodes back to the caller, but continues to retry until timeout,
so other error conditions were not actually possible.)

this patch moves the checks to take place before answer parsing, and
performs them for each answer rather than only the answer to the first
query. if nxdomain is seen it's assumed to apply to both queries since
that's how dns semantics work.

the AD (authenticated data) bit in outgoing dns queries is defined by
rfc3655 to request that the nameserver report (via the same bit in the
response) whether the result is authenticated by DNSSEC. while all
results returned by a DNSSEC conforming nameserver will be either
authenticated or cryptographically proven to lack DNSSEC protection,
for some applications it's necessary to be able to distinguish these
two cases. in particular, conforming and compatible handling of DANE
(TLSA) records requires enforcing them only in signed zones.

when the AD bit was first defined for queries, there were reports of
compatibility problems with broken firewalls and nameservers dropping
queries with it set. these problems are probably a thing of the past,
and broken nameservers are already unsupported. however, since there
is no use in the AD bit with the netdb.h interfaces, explicitly clear
it in the queries they make. this ensures that, even with broken
setups, the standard functions will work, and at most the res_*
functions break.

unsigned char promotes to int, which can overflow when shifted left by
24 bits or more. this has been reported multiple times but then
forgotten. it's expected to be benign UB, but can trap when built with
explicit overflow catching (ubsan or similar). fix it now.

note that promotion to uint32_t is safe and portable even outside of
the assumptions usually made in musl, since either uint32_t has rank
at least unsigned int, so that no further default promotions happen,
or int is wide enough that the shift can't overflow. this is a
desirable property to have in case someone wants to reuse the code
elsewhere.

it's been reported that the vdso clock_gettime64 function on (32-bit)
arm is broken, producing erratic results that grow at a rate far
greater than one reported second per actual elapsed second. the vdso
function seems to have been added sometime between linux 5.4 and 5.6,
so if there's ever been a working version, it was only present for a
very short window.

it's not clear what the eventual upstream kernel solution will be, but
something needs to be done on the libc side so as not to be producing
binaries that seem to work on older/existing/lts kernels (which lack
the function and thus lack the bug) but will break fantastically when
moving to newer kernels.

hopefully vdso support will be added back soon, but with a new symbol
name or version from the kernel to allow continued rejection of broken
ones.

analogous to commit b287cd74 but for
the custom FILE stream type the wcstol and wcstod family use. __toread
could be used here as well, but there's a simple direct fix to make
the buffer pointers initially valid for subtraction, so just do that
to avoid pulling in stdio exit code in programs that don't use stdio.

the sh version of fesetround or'd the new rounding mode onto the
control register without clearing the old rounding mode bits, making
changes sticky. this was the root cause of multiple test failures.

apparently this function was intended at some point to be used by
strto* family as well, and thus was put in its own file; however, as
far as I can tell, it's only ever been used by vsscanf. move it to the
same file to reduce the number of source files and external symbols.

this idea came up when I thought we might need to zero the UNGET
portion of buf as well, but it seems like a useful improvement even
when that turned out not to be necessary.

shgetc sets up to be able to perform an "unget" operation without the
caller having to remember and pass back the character value, and for
this purpose used a conditional store idiom:

    if (f->rpos[-1] != c) f->rpos[-1] = c

to make it safe to use with non-writable buffers (setup by the
sh_fromstring macro or __string_read with sscanf).

however, validity of this depends on the buffer space at rpos[-1]
being initialized, which is not the case under some conditions
(including at least unbuffered files and fmemopen ones).

whenever data was read "through the buffer", the desired character
value is already in place and does not need to be written. thus,
rather than testing for the absence of the value, we can test for
rpos<=buf, indicating that the last character read could not have come
from the buffer, and thereby that we have a "real" buffer (possibly of
zero length) with writable pushback (UNGET bytes) below it.

as reported/analyzed by Pascal Cuoq, the shlim and shcnt
macros/functions are called by the scanf core (vfscanf) with f->rpos
potentially null (if the FILE is not yet activated for reading at the
time of the call). in this case, they compute differences between a
null pointer (f->rpos) and a non-null one (f->buf), resulting in
undefined behavior.

it's unlikely that any observably wrong behavior occurred in practice,
at least without LTO, due to limits on what's visible to the compiler
from translation unit boundaries, but this has not been checked.

fix is simply ensuring that the FILE is activated for read mode before
entering the main scanf loop, and erroring out early if it can't be.

TZ containg a timezone name with >TZNAME_MAX characters currently
breaks musl's timezone parsing. getname() stops after TZNAME_MAX
characters. getoff() will consume no characters (because the next
character is not a digit) and incorrectly return 0. Then, because
there are remaining alphabetic characters, __daylight == 1, and
dst_off == -3600.

getname() must consume the entire timezone name, even if it will not
fit in d/__tzname, so when it returns, s points to the offset digits.

Parsing the timezone name must stop when reaching the null terminator.
In that case, there is no '>' to skip.

Commit d9bdfd16 ("fix memccpy to not access buffer past given size")
correctly added a check for 'n' nonzero, but made the pre-existing test
'*s==c' redundant: n!=0 implies *s==c. Remove the unnecessary check.

Reported by Alexey Izbyshev.

as a result of commit b6a6cd70,
the REL_NONE case is now redundant.

Linux defines MAP_SYNC on powerpc and powerpc64 as of commit
22fcea6f85f2 ("mm: move MAP_SYNC to asm-generic/mman-common.h"),
so we can stop undefining it on those architectures.

change the current O(n) lookup to O(1) based on the machinery
described in "How To Write Shared Libraries" (Appendix B).

kernel commit 4693916846269d633a3664586650dbfac2c5562f (first included
in release v4.14) silently fixed a bug whereby the reserved space
(which was later used for high bits of time) in IPC_STAT structures
was left untouched rather than zeroed. this means that a caller that
wants to read the high bits needs to pre-zero the memory.

since it's not clear that these operations are permitted to modify the
destination buffer on failure, use a temp buffer and copy back to the
caller's buffer on success.

on all mips variants, Linux did (and maybe still does) have some
syscall return paths that wrongly return both the error flag in r7 and
a negated error code in r2. in particular this happened for at least
some causes of ENOSYS.

add an extra check to only negate the error code if it's positive to
begin with.

bug report and concept for patch by Andreas Dröscher.

commit 4221f154 added the r7
constraint apparently out of a misunderstanding of the breakage it was
addressing, and did so because the asm was in a shared macro used by
all the __syscallN inline functions. now "+r" is used in the output
section for the forms 4-argument and up, so having it in input is
redundant, and the forms with 0-3 arguments don't need it as an input
at all.

the r2 constraint is kept because without it most gcc versions (seems
to be all prior to 9.x) fail to honor the output register binding for
r2. this seems to be a variant of gcc bug #87733.

both the r7 and r2 input constraints look useless, but the r2 one was
a quiet workaround for gcc bug 87733, which affects all modern
versions prior to 9.x, so it's kept and documented.

exactly revert commit 604f8d3d which
was wrong; it caused a major regression on Linux versions prior to
2.6.36. old kernels did not properly preserve r2 across syscall
restart, and instead restarted with the instruction right before
syscall, imposing a contract that the previous instruction must load
r2 from an immediate or a register (or memory) not clobbered by the
syscall.

effectivly revert commit ddc7c4f9
which was wrong; it caused a major regression on Linux versions prior
to 2.6.36. old kernels did not properly preserve r2 across syscall
restart, and instead restarted with the instruction right before
syscall, imposing a contract that the previous instruction must load
r2 from an immediate or a register (or memory) not clobbered by the
syscall.

since other changes were made since, including removal of the struct
stat conversion that was replaced by separate struct kstat, this is
not a direct revert, only a functional one.

the "0"(r2) input constraint added back seems useless/erroneous, but
without it most gcc versions (seems to be all prior to 9.x) fail to
honor the output register binding for r2. this seems to be a variant
of gcc bug #87733. further changes should be made later if a better
workaround is found, but this one has been working since 2012. it
seems this issue was encountered but misidentified then, when it
inspired commit 4221f154.

these were leftover from early beginnings when arpa/inet.h was not
including netinet/in.h.

this is added for POSIX-future as the outcome of Austin Group issue
599. since it's in the reserved namespace for pthread.h, there are no
namespace considerations for adding it early.

commit 59324c8b added __socketcall
analogous to __syscall, returning the negated error rather than
setting errno. use it to simplify the fallback path of socket(),
avoiding extern calls and access to errno.

Author: Rich Felker <dalias@aerifal.cx>
Date:   Tue Jul 30 17:51:16 2019 -0400

    make __socketcall analogous to __syscall, error-returning