otherwise alarm will break on 32-bit archs when time_t is changed to
64-bit. a second itimerval object is introduced for retrieving the old
value, since the setitimer function has restrict-qualified arguments.

commit f3ed8bfe inadvertently removed
labels that were still needed.

commit 31c5fb80 introduced underflow
code paths for the i386 math asm, along with checks on the fpu status
word to skip the underflow-generation instructions if the underflow
flag was already raised. unfortunately, at least one such path, in
log1p, returned with 2 items on the x87 stack rather than just 1 item
for the return value. this is a violation of the ABI's calling
convention, and could cause subsequent floating point code to produce
NANs due to x87 stack overflow. if floating point results are used in
flow control, this can lead to runaway wrong code execution.

rather than reviewing each "underflow already raised" code path for
correctness, remove them all. they're likely slower than just
performing the underflow code unconditionally, and significantly more
complex.

all of this code should be ripped out and replaced by C source files
with inline asm. doing so would preclude this kind of error by having
the compiler perform all x87 stack register allocation and stack
manipulation, and would produce comparable or better code. however
such a change is a much larger project.

commit 72f50245 broke this by creating
a code path where r is uninitialized.

commit f3f96f2d added these for the
rest of the archs, but the patch it corresponded to missed riscv64
since riscv64 was not yet upstream at the time. this caused commit
dfc81828 to break riscv64 build, due
to a wrong assumption that SYS_statx was unconditionally defined.

this fixes a major upcoming performance regression introduced by
commit 72f50245, whereby 32-bit archs
would lose vdso clock_gettime after switching to 64-bit time_t, unless
the kernel supports time64 and provides a time64 version of the vdso
function. this would incur not just one but two syscalls: first, the
failed time64 syscall, then the fallback time32 one.

overflow of the 32-bit result is detected and triggers a revert to
syscalls. normally, on a system that's not Y2038-ready, this would
still overflow, but if the process has been migrated to a
time64-capable kernel or if the kernel has been hot-patched to add
time64 syscalls, it may conceivably work.

otherwise, 32-bit archs that could otherwise share the generic
bits/ipc.h would need to duplicate the struct ipc_perm definition,
obscuring the fact that it's the same. sysvipc is not widely used and
these headers are not commonly included, so there is no performance
gain to be had by limiting the number of indirectly included files
here.

files with the existing time32 definition of IPC_STAT are added to all
current 32-bit archs now, so that when it's changed the change will
show up as a change rather than addition of a new file where it's less
obvious that the value is changing vs the generic one that was used
before.

per policy, define the feature test macro to get declarations for the
pthread_tryjoin_np and pthread_timedjoin_np functions. in the past
this has been only for checking; with 32-bit archs getting 64-bit
time_t it will also be necessary for symbols to get redirected
correctly.

to make use of {sem,shm,msg}ctl IPC_STAT functionality to provide
64-bit time_t on 32-bit archs, IPC_STAT and related macros must be
defined with bit 8 (0x100) set. allow archs to define IPC_STAT in
bits/ipc.h, and define the other macros in terms of it so that they
all get the same value of the time64 bit.

the time64 syscall has to be used if time_t is 64-bit, since there's
no way of knowing before making a syscall whether the result will fit
in 32 bits, and the 32-bit syscalls do not report overflow as an
error.

on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the result is now read from the kernel
through long[2] array, then copied into the timespec, to remove the
assumption that time_t is the same as long.

vdso clock_gettime is still used in place of a syscall if available.
32-bit archs with 64-bit time_t must use the time64 version of the
vdso function; if it's not available, performance will significantly
suffer. support for both vdso functions could be added, but would
break the ability to move a long-lived process from a pre-time64
kernel to one that can outlast Y2038 with checkpoint/resume, at least
without added hacks to identify that the 32-bit function is no longer
usable and stop using it (e.g. by seeing negative tv_sec). this
possibility may be explored in future work on the function.

the 64-bit/time64 version of the syscall is not API-compatible with
the userspace timex structure definition; fields specified as long
have type long long. so when using the time64 syscall, we have to
convert the entire structure. this was always the case for x32 as
well, but went unnoticed, meaning that clock_adjtime just passed junk
to the kernel on x32. it should be fixed now.

for the fallback case, we avoid encoding any assumptions about the new
location of the time member or naming of the legacy slots by accessing
them through a union of the kernel type and the new userspace type.
the only assumption is that the non-time members live at the same
offsets as in the (non-time64, long-based) kernel timex struct. this
property saves us from having to convert the whole thing, and avoids a
lot of additional work in compat shims.

the new code is statically unreachable for now except on x32, where it
fixes major brokenness. it is permanently unreachable on 64-bit.

without this, the SIOCGSTAMP and SIOCGSTAMPNS ioctl commands, for
obtaining timestamps, would stop working on pre-5.1 kernels after
time_t is switched to 64-bit and their values are changed to the new
time64 versions.

new code is written such that it's statically unreachable on 64-bit
archs, and on existing 32-bit archs until the macro values are changed
to activate 64-bit time_t.

without this, the SO_RCVTIMEO and SO_SNDTIMEO socket options would
stop working on pre-5.1 kernels after time_t is switched to 64-bit and
their values are changed to the new time64 versions.

new code is written such that it's statically unreachable on 64-bit
archs, and on existing 32-bit archs until the macro values are changed
to activate 64-bit time_t.

the __socketcall and __socketcall_cp macros are remnants from a really
old version of the syscall-mechanism infrastructure, and don't follow
the pattern that the "__" version of the macro returns the raw negated
error number rather than setting errno and returning -1.

for time64 purposes, some socket syscalls will need to operate on the
error value rather than returning immediately, so fix this up so they
can use it.

being "ctl" functions that take command numbers, these will be handled
like ioctl/sockopt/etc., using new command numbers for the time64
variants with an "IPC_TIME64" bit added to their values. to obtain
such a reserved bit, we reuse the IPC_64 bit, 0x100, which served only
as part of the libc-to-kernel interface, not as a public interface of
the libc functions.

using new command numbers avoids the need for compat shims (in ABIs
doing time64 through symbol redirection and compat shims) and, by
virtue of having a fixed time64 bit for all commands, we can ensure
that libc can perform the appropriate translations, even if the
application is using new commands from a newer version of the libc
headers than the libc available at runtime.

for the vast majority of 32-bit archs, the kernel {sem,shm,msq}id64_ds
definitions left padding space intended for expanding their time_t
fields to 64 bits in-place, and it would have been really nice to be
able to do time64 support that way. however the padding was almost
always in little-endian order (except on powerpc, and for msqid_ds
only on mips, where it matched the arch's byte order), and more
importantly, the alignment was overlooked. in semid_ds and msqid_ds,
the time_t members were not suitably aligned to be expanded to 64-bit,
due to the ipc_perm header consisting of 9 32-bit words -- except on
powerpc where ipc_perm contains an extra padding word. in shmid_ds,
the time_t members were suitably aligned, except that mips
(accidentally?) omitted the padding for them alltogether.

as a result, we're stuck with adding new time_t fields on the end of
the structures, and assembling the 32-bit lo/hi parts (or 16-bit hi
parts, for mips shmid_ds, which lacked sufficient reserved space for
full 32-bit hi parts) to fill them in.

all of the functional changes here are conditional on the IPC_TIME64
macro having a nonzero definition, which will only happen when
IPC_STAT is redefined for 32-bit archs, and on time_t being larger
than long, so for now the new code is all dead code.

due to the variadic signature, semctl needs to be made aware of any
new commands that take arguments. this was overlooked when commit
af55070e added SEM_STAT_ANY.

these differ from generic only in using endian-matched padding with a
short __ipc_perm_seq field in place of the int field in generic. this
is not a documented public interface anyway, and the original intent
was to use int here. some ports just inadvertently slipped in the
kernel short+padding form.

previously these differed from generic because they needed their own
definitions of IPC_64. now that it's no longer in public header,
they're identical.

the definition of the IPC_64 macro controls the interface between libc
and the kernel through syscalls; it's not a public API. the meaning is
rather obscure. long ago, Linux's sysvipc *id_ds structures used
16-bit uids/gids and wrong types for a few other fields. this was in
the libc5 era, before glibc. the IPC_64 flag (64 is a misnomer; it's
more like 32) tells the kernel to use the modern[-ish] versions of the
structures.

the definition of IPC_64 has nothing to do with whether the arch is
32- or 64-bit. rather, due to either historical accident or
intentional obnoxiousness, the kernel only accepts and masks off the
0x100 IPC_64 flag conditional on CONFIG_ARCH_WANT_IPC_PARSE_VERSION,
i.e. for archs that want to provide, or that accidentally provided,
both. for archs which don't define this option, no masking is
performed and commands with the 0x100 bit set will fail as invalid. so
ultimately, the definition is just a matter of matching an arbitrary
switch defined per-arch in the kernel.

major changes are made alongside adding time64 syscall support to
account for issues found during research. select historically accepts
non-normalized (tv_usec not restricted to less than 1000000) timeouts,
and the kernel normalizes them, but the normalization code is buggy
and subject to integer overflows. since normalization is needed anyway
when using SYS_pselect6 or SYS_pselect6_time64 as the backend, simply
do it up-front to eliminate both code path complexity and the
possibility of kernel bugs.

as a side effect, select no longer updates the caller's timeout
timeval with the remaining time. previously, archs that used
SYS_select updated it and archs that used SYS_pselect6 didn't. this
change may turn out to be controversial and may need revisiting, but
in any case the old behavior was not strictly conforming.

POSIX allows modification of the timeout "upon successful completion",
but the Linux syscall modifies it upon unsuccessful completion (EINTR)
as well (and presumably each time the syscall stops and restarts
before it's known whether completion will be successful). it's
possible that this language does not reflect the actual intent of the
standard, since other historical implementations probably behaved like
Linux, but that should be clarified if there's a desire to bring the
old behavior back. regardless, programs that are depending on this are
not correct and are already broken on some archs we support.

the time64 syscall is used only if the timeout does not fit in 32
bits. after preprocessing, the code is unchanged on 64-bit archs. for
32-bit archs, the timeout now goes through an intermediate copy,
meaning that the caller does not get back the updated timeout. this is
based on my reading of the documentation, which does not document the
updating as a contract you can rely on, and mentions that the whole
recvmmsg timeout mechanism is buggy and unlikely to be useful. if it
turns out that there's interest in making the remaining time
officially available to callers, such functionality could be added
back later.

these functions have no new time64 syscall, so the existence of a
time64 syscall cannot be used as the condition for the new code.
instead, assume the syscall takes timevals as longs, which is true
everywhere but x32, and interface with the kernel through long[4]
objects.

rather than adding new hacks to special-case x32 here, just add
x32-specific source files since a trivial syscall wrapper suffices
there.

the new code paths added in this commit are statically unreachable on
all current archs, but will become reachable when 32-bit archs get
64-bit time_t.

this layout is more common already than the old generic, and should
become even more common in the future with new archs added and with
64-bit time_t on 32-bit archs.

some of these were not exact duplicates, but had gratuitously
different naming for padding, or omitted the endian checks because the
arch is fixed-endian.

this layout is slightly less common than the old generic one, but only
because x86_64 and x32 wrongly (according to comments in the kernel
headers) copied the i386 padding. for future archs, and with 64-bit
time_t on 32-bit archs, the new layout here will become the most
common, and it makes sense to treat it as the generic.

having preprocessor conditionals on byte order in the bits headers for
fixed-endian archs is confusing at best. remove them.

various padding fields in the generic bits/sem.h were defined in terms
of time_t as a cheap hack standing in for "kernel long", to allow x32
to use the generic version of the file. this was a really bad idea, as
it ended up getting copied into lots of arch-specific versions of the
bits file, and is a blocker to changing time_t to 64-bit on 32-bit
archs.

this commit adds an x32-specific version of the header, and changes
padding type back from time_t to long (currently the same type on all
archs but x32) in the generic header and all the others the hack got
copied into.

this layout is more common already than the old generic, and should
become even more common in the future with new archs added and with
64-bit time_t on 32-bit archs.

the duplicate arch-specific copies are not removed yet in this commit,
so as to assist git tooling in copy/rename tracking.

there are more archs sharing the generic 64-bit version of the struct,
which is uniform and much more reasonable, than sharing the current
"generic" one, and depending on how time64 sysvipc is done for 32-bit
archs, even more may be sharing the "64-bit version" in the future.

so, duplicate the current generic to all archs using it (arm, i386,
m68k, microblaze, or1k) so that the generic can be changed freely.

this is recorded as its own commit mainly as a hint to git tooling, to
assist in copy/move tracking.

the changes here are semantically and structurally identical to those
made to timer_settime and timer_gettime for time64 support.

as with clock_getres, the time64 syscall for this is not necessary or
useful, this time since scheduling timeslices are not on the order 68
years. if there's a 32-bit syscall, use it and expand the result into
timespec; otherwise there is only one syscall and it does the right
thing to store to timespec directly.

on 64-bit archs, there is no change to the code after preprocessing.

the time64 syscall for this is not necessary or useful, since clock
resolution is generally better than 68-year granularity. if there's a
32-bit syscall, use it and expand the result into timespec; otherwise
there is only one syscall and it does the right thing to store to
timespec directly.

on 64-bit archs, there is no change to the code after preprocessing.

the time64 syscall has to be used if time_t is 64-bit, since there's
no way of knowing before making a syscall whether the result will fit
in 32 bits, and the 32-bit syscalls do not report overflow as an
error.

on 64-bit archs, there is no change to the code after preprocessing.
on current 32-bit archs, the result is now read from the kernel
through long[4] array, then copied into the timespec, to remove the
assumption that time_t is the same as long.

the x32 syscall interfaces treat timespec's tv_nsec member as 64-bit
despite the API type being long and long being 32-bit in the ABI. this
is no problem for syscalls that store timespecs to userspace as
results, but caused uninitialized padding to be misinterpreted as the
high bits in syscalls that take timespecs as input.

since the beginning of the port, we've dealt with this situation with
hacks in syscall_arch.h, and injected between __syscall_cp_c and
__syscall_cp_asm, to special-case the syscall numbers that involve
timespecs as inputs and copy them to a form suitable to pass to the
kernel.

commit 40aa18d5 set the stage for
removal of these hacks by letting us treat the "normal" x32 syscalls
dealing with timespec as if they're x32's "time64" syscalls,
effectively making x32 ax "time64-only 32-bit arch" like riscv32 will
be when it's added. since then, all users of syscalls that x32's
syscall_arch.h had hacks for have been updated to use time64 syscalls,
so the hacks can be removed.

there are still at least a few other timespec-related syscalls broken
on x32, which were overlooked when the x32 hacks were done or added
later. these include at least recvmmsg, adjtimex/clock_adjtime, and
timerfd_settime, and they will be fixed independently later on.