originally it was right on 32-bit archs and wrong on 64-bit, but after
recent changes it was wrong everywhere. with this commit, it's now
right everywhere.

apparently these features have been in Linux for a while now, so it
makes sense to support them. the bit twiddling seems utterly illogical
and wasteful, especially the negation, but that's how the kernel folks
chose to encode pids/tids into the clock id.

this is a minor fix to increase the period of the obsolete rand_r a bit.
an include header in __rand48_step.c is fixed as well.

some applications rely on the low bits of rand() to be reasonably good
quality prng, so now it fixed by using the top bits of a 64 bit LCG,
this is simple, has small state and passes statistical tests.
D.E. Knuth attributes the multiplier to C.E. Haynes in TAOCP Vol2 3.3.4

they are intentionally listed after the libc include directory so that
the gcc float.h, etc. don't get used in place of the libc ones.

defining tm_gmtoff and tm_zone as macros was breaking some application
code that used these names for its own purposes.

this commit only covers the byte-based scanf-family functions. the
wide functions still lack support for the 'm' modifier.

this brings the wide version of the code into alignment with the
byte-based version, in preparation for adding support for the m
(malloc) modifier.

the concept here is that %s and %c are essentially special-cases of
%[, with some minimal additional special-casing.

aside from simplifying the code and reducing the number of complex
code-paths that would need changing to make optimizations later, the
main purpose of this change is to simplify addition of the 'm'
modifier which causes scanf to allocate storage for the string being
read.

failure to do so was causing crashes on x86_64 when ctors used SSE,
which was first observed when ctors called variadic functions due to
the SSE prologue code inserted into every variadic function.

following glibc use the lowest rank 64bit integer type for ino_t etc.
this is eg. useful for printf format compatibility

previously we were using an unsigned type on 32-bit systems so that
subtraction would be well-defined when it wrapped, but since wrapping
is non-conforming anyway (when clock() overflows, it has to return -1)
the only use of unsigned would be to buy a little bit more time before
overflow. this does not seem worth having the type vary per-arch
(which leads to more arch-specific bugs) or disagree with the ABI musl
(mostly) follows.

per Austin Group interpretation for issue #686, which cites the
requirements of ISO C, clock() cannot wrap. if the result is not
representable, it must return (clock_t)-1. in addition, the old code
was performing wrapping via signed overflow and thus invoking
undefined behavior.

since it seems impossible to accurately check for overflow with the
old times()-based fallback code, I have simply dropped the fallback
code for now, thus always returning -1 on ancient systems. if there's
a demand for making it work and somebody comes up with a way, it could
be reinstated, but the clock() function is essentially useless on
32-bit system anyway (it overflows in less than an hour).

it should be noted that I used LONG_MAX rather than ULONG_MAX, despite
32-bit archs using an unsigned type for clock_t. this discrepency with
the glibc/LSB type definitions will be fixed now; since wrapping of
clock_t is no longer supported, there's no use in it being unsigned.

The underflow exception is not raised correctly in some
cornercases (see previous fma commit), added comments
with examples for fmaf, fmal and non-x86 fma.

In fmaf store the result before returning so it has the
correct precision when FLT_EVAL_METHOD!=0

1) in downward rounding fma(1,1,-1) should be -0 but it was 0 with
gcc, the code was correct but gcc does not support FENV_ACCESS ON
so it used common subexpression elimination where it shouldn't have.
now volatile memory access is used as a barrier after fesetround.

2) in directed rounding modes there is no double rounding issue
so the complicated adjustments done for nearest rounding mode are
not needed. the only exception to this rule is raising the underflow
flag: assume "small" is an exactly representible subnormal value in
double precision and "verysmall" is a much smaller value so that
	(long double)(small plus verysmall) == small
then
	(double)(small plus verysmall)
raises underflow because the result is an inexact subnormal, but
	(double)(long double)(small plus verysmall)
does not because small is not a subnormal in long double precision
and it is exact in double precision.
now this problem is fixed by checking inexact using fenv when the
result is subnormal

* use unsigned arithmetics
* use unsigned to store arg reduction quotient (so n&3 is understood)
* remove z=0.0 variables, use literal 0
* raise underflow and inexact exceptions properly when x is small
* fix spurious underflow in tanl

patch by Strake. previously is was not feasible to duplicate this
functionality of the functions these were modeled on, since argv[0]
was not saved at program startup, but now that it's available it's
easy to use.

* use unsigned arithmetics on the representation
* store arg reduction quotient in unsigned (so n%2 would work like n&1)
* use different convention to pass the arg reduction bit to __tan
  (this argument used to be 1 for even and -1 for odd reduction
  which meant obscure bithacks, the new n&1 is cleaner)
* raise inexact and underflow flags correctly for small x
  (tanl(x) may still raise spurious underflow for small but normal x)
  (this exception raising code increases codesize a bit, similar fixes
  are needed in many other places, it may worth investigating at some
  point if the inexact and underflow flags are worth raising correctly
  as this is not strictly required by the standard)
* tanf manual reduction optimization is kept for now
* tanl code path is cleaned up to follow similar logic to tan and tanf

there was some question as to how many decimal places to use, since
one decimal place is always sufficient to identify the smallest
denormal uniquely. for now, I'm following the example in the C
standard which is consistent with the other min/max macros we already
had in place.

somehow I missed this when removing the corresponding
__STDC_LIMIT_MACROS and __STDC_CONSTANT_MACROS nonsense from stdint.h.
these were all attempts by the C committee to guess what the C++
committee would want, and the guesses turned out to be wrong.

support for these was recently added to sysmacros.h. note that the
syscall argument is a long, despite dev_t being 64-bit, so on 32-bit
archs the high bits will be lost. it appears the high bits are just
glibc silliness and not part of the kernel api, anyway, but it's nice
that we have them there for future expansion if needed.

When FLT_EVAL_METHOD!=0 (only i386 with x87 fp) the excess
precision of an expression must be removed in an assignment.
(gcc needs -fexcess-precision=standard or -std=c99 for this)

This is done by extra load/store instructions which adds code
bloat when lot of temporaries are used and it makes the result
less precise in many cases.
Using double_t and float_t avoids these issues on i386 and
it makes no difference on other archs.

For now only a few functions are modified where the excess
precision is clearly beneficial (mostly polynomial evaluations
with temporaries).

object size differences on i386, gcc-4.8:
             old   new
__cosdf.o    123    95
__cos.o      199   169
__sindf.o    131    95
__sin.o      225   203
__tandf.o    207   151
__tan.o      605   499
erff.o      1470  1416
erf.o       1703  1649
j0f.o       1779  1745
j0.o        2308  2274
j1f.o       1602  1568
j1.o        2286  2252
tgamma.o    1431  1424
math/*.o   64164 63635

__FLOAT_BITS and __DOUBLE_BITS macros used union compound literals,
now they are changed into static inline functions. A good C compiler
generates the same code for both and the later is C++ conformant.

since CLOCKS_PER_SEC is 1000000 (required by XSI) and the times
syscall reports values in 1/100 second units (Linux), the correct
scaling factor is 10000, not 100. note that only ancient kernels which
lack clock_gettime are affected.

all return values are valid, and on 32-bit systems, values that look
like errors can and will occur. since the only actual error this
function could return is EFAULT, and it is only returnable when the
application has invoked undefined behavior, simply ignore the
possibility that the return value is actually an error code.

there are several reasons for this change. one is getting rid of the
repetition of the syscall signature all over the place. another is
sharing the constant masks without costly GOT accesses in PIC.

the main motivation, however, is accurately representing whether we
want to block signals that might be handled by the application, or all
signals.

use __syscall rather than syscall when failure is not possible or not
to be considered.

they have already blocked signals before decrementing the thread
count, so the code being removed is unreachable in the case where the
thread is no longer counted.

this was simply a case of saving the state in the wrong place.

the previous few commits ended up leaving the thread count and signal
mask wrong for atexit handlers and stdio cleanup.