this behavior (opening fds 0-2 for a suid program) is explicitly
allowed (but not required) by POSIX to protect badly-written suid
programs from clobbering files they later open.

this commit does add some cost in startup code, but the availability
of auxv and the security flag will be useful elsewhere in the future.
in particular auxv is needed for static-linked vdso support, which is
still waiting to be committed (sorry nik!)

fix up clone signature to match the actual behavior. the new
__syncall_wait function allows a __synccall callback to wait for other
threads to continue without returning, so that it can resume action
after the caller finishes. this interface could be made significantly
more general/powerful with minimal effort, but i'll wait to do that
until it's actually useful for something.

previously, stdio used spinlocks, which would be unacceptable if we
ever add support for thread priorities, and which yielded
pathologically bad performance if an application attempted to use
flockfile on a key file as a major/primary locking mechanism.

i had held off on making this change for fear that it would hurt
performance in the non-threaded case, but actually support for
recursive locking had already inflicted that cost. by having the
internal locking functions store a flag indicating whether they need
to perform unlocking, rather than using the actual recursive lock
counter, i was able to combine the conditionals at unlock time,
eliminating any additional cost, and also avoid a nasty corner case
where a huge number of calls to ftrylockfile could cause deadlock
later at the point of internal locking.

this commit also fixes some issues with usage of pthread_self
conflicting with __attribute__((const)) which resulted in crashes with
some compiler versions/optimizations, mainly in flockfile prior to
pthread_create.

changing credentials in a multi-threaded program is extremely
difficult on linux because it requires synchronizing the change
between all threads, which have their own thread-local credentials on
the kernel side. this is further complicated by the fact that changing
the real uid can fail due to exceeding RLIMIT_NPROC, making it
possible that the syscall will succeed in some threads but fail in
others.

the old __rsyscall approach being replaced was robust in that it would
report failure if any one thread failed, but in this case, the program
would be left in an inconsistent state where individual threads might
have different uid. (this was not as bad as glibc, which would
sometimes even fail to report the failure entirely!)

the new approach being committed refuses to change real user id when
it cannot temporarily set the rlimit to infinity. this is completely
POSIX conformant since POSIX does not require an implementation to
allow real-user-id changes for non-privileged processes whatsoever.
still, setting the real uid can fail due to memory allocation in the
kernel, but this can only happen if there is not already a cached
object for the target user. thus, we forcibly serialize the syscalls
attempts, and fail the entire operation on the first failure. this
*should* lead to an all-or-nothing success/failure result, but it's
still fragile and highly dependent on kernel developers not breaking
things worse than they're already broken.

ideally linux will eventually add a CLONE_USERCRED flag that would
give POSIX conformant credential changes without any hacks from
userspace, and all of this code would become redundant and could be
removed ~10 years down the line when everyone has abandoned the old
broken kernels. i'm not holding my breath...

some functions that should have been testing whether pthread_self()
had been called and initialized the thread pointer were instead
testing whether pthread_create() had been called and actually made the
program "threaded". while it's unlikely any mismatch would occur in
real-world problems, this could have introduced subtle bugs. now, we
store the address of the main thread's thread descriptor in the libc
structure and use its presence as a flag that the thread register is
initialized. note that after fork, the calling thread (not necessarily
the original main thread) is the new main thread.

the goal is to be able to use pthread_setcancelstate internally in
the implementation, whenever a function might want to use functions
which are cancellation points but avoid becoming a cancellation point
itself. i could have just used a separate internal function for
temporarily inhibiting cancellation, but the solution in this commit
is better because (1) it's one less implementation-specific detail in
functions that need to use it, and (2) application code can also get
the same benefit.

previously, pthread_setcancelstate dependend on pthread_self, which
would pull in unwanted thread setup overhead for non-threaded
programs. now, it temporarily stores the state in the global libc
struct if threads have not been initialized, and later moves it if
needed. this way we can instead use __pthread_self, which has no
dependencies and assumes that the thread register is already valid.

this patch improves the correctness, simplicity, and size of
cancellation-related code. modulo any small errors, it should now be
completely conformant, safe, and resource-leak free.

the notion of entering and exiting cancellation-point context has been
completely eliminated and replaced with alternative syscall assembly
code for cancellable syscalls. the assembly is responsible for setting
up execution context information (stack pointer and address of the
syscall instruction) which the cancellation signal handler can use to
determine whether the interrupted code was in a cancellable state.

these changes eliminate race conditions in the previous generation of
cancellation handling code (whereby a cancellation request received
just prior to the syscall would not be processed, leaving the syscall
to block, potentially indefinitely), and remedy an issue where
non-cancellable syscalls made from signal handlers became cancellable
if the signal handler interrupted a cancellation point.

x86_64 asm is untested and may need a second try to get it right.

this is something of a tradeoff, as now set*id() functions, rather
than pthread_create, are what pull in the code overhead for dealing
with linux's refusal to implement proper POSIX thread-vs-process
semantics. my motivations are:

1. it's cleaner this way, especially cleaner to optimize out the
rsyscall locking overhead from pthread_create when it's not needed.
2. it's expected that only a tiny number of core system programs will
ever use set*id() functions, whereas many programs may want to use
threads, and making thread overhead tiny is an incentive for "light"
programs to try threads.

with these small changes, libc functions which need to call functions
which are cancellation points, but which themselves must not be
cancellation points, can use the CANCELPT_INHIBIT and CANCELPT_RESUME
macros to temporarily inhibit all cancellation.

we want to keep atomically updated fields (locks and thread count) and
really anything writable far away from frequently-needed function
pointers. stuff some rarely-needed function pointers in between to
pad, hopefully up to a cache line boundary.

- there is no longer any risk of spoofing cancellation requests, since
  the cancel flag is set in pthread_cancel rather than in the signal
  handler.

- cancellation signal is no longer unblocked when running the
  cancellation handlers. instead, pthread_create will cause any new
  threads created from a cancellation handler to unblock their own
  cancellation signal.

- various tweaks in preparation for POSIX timer support.

this commit addresses two issues:

1. a race condition, whereby a cancellation request occurring after a
syscall returned from kernelspace but before the subsequent
CANCELPT_END would cause cancellable resource-allocating syscalls
(like open) to leak resources.

2. signal handlers invoked while the thread was blocked at a
cancellation point behaved as if asynchronous cancellation mode wer in
effect, resulting in potentially dangerous state corruption if a
cancellation request occurs.

the glibc/nptl implementation of threads shares both of these issues.

with this commit, both are fixed. however, cancellation points
encountered in a signal handler will not be acted upon if the signal
was received while the thread was already at a cancellation point.
they will of course be acted upon after the signal handler returns, so
in real-world usage where signal handlers quickly return, it should
not be a problem. it's possible to solve this problem too by having
sigaction() wrap all signal handlers with a function that uses a
pthread_cleanup handler to catch cancellation, patch up the saved
context, and return into the cancellable function that will catch and
act upon the cancellation. however that would be a lot of complexity
for minimal if any benefit...

prefer using visibility=hidden for __libc internal data, rather than
an accessor function, if the compiler has visibility.

optimize with -O3 for PIC targets (shared library). without heavy
inlining, reloading the GOT register in small functions kills
performance. 20-30% size increase for a single libc.so is not a big
deal, compared to comparaible size increase in every static binaries.

use -Bsymbolic-functions, not -Bsymbolic. global variables are subject
to COPY relocations, and thus binding their addresses in the library
at link time will cause library functions to read the wrong (original)
copies instead of the copies made in the main program's bss section.

add entry point, _start, for dynamic linker.

prior to this change, a large portion of libc was unusable prior to
relocation by the dynamic linker, due to dependence on the global data
in the __libc structure and the need to obtain its address through the
GOT. with this patch, the accessor function __libc_loc is now able to
obtain the address of __libc via PC-relative addressing without using
the GOT. this means the majority of libc functionality is now
accessible right away.

naturally, the above statements all depend on having an architecture
where PC-relative addressing and jumps/calls are feasible, and a
compiler that generates the appropriate code.

note that this presently does not handle consistency of the libc's own
global state during forking. as per POSIX 2008, if the parent process
was threaded, the child process may only call async-signal-safe
functions until one of the exec-family functions is called, so the
current behavior is believed to be conformant even if non-ideal. it
may be improved at some later time.