add powerpc soft-float support

Some PowerPC CPUs (e.g. Freescale MPC85xx) have a completely different
instruction set for floating point operations (SPE).
Executing regular PowerPC floating point instructions results in
"Illegal instruction" errors.

Make it possible to run these devices in soft-float mode.

arch/powerpc/bits/fenv.h

+#ifdef _SOFT_FLOAT
+#define FE_ALL_EXCEPT 0
+#define FE_TONEAREST  0
+#else
 #define FE_TONEAREST	0
 #define FE_TOWARDZERO	1
 #define FE_UPWARD	2
@@ -24,6 +28,7 @@
 
 #define FE_ALL_INVALID		0x01f80700
 #endif
+#endif
 
 typedef unsigned fexcept_t;
 typedef double fenv_t;

arch/powerpc/reloc.h

-#define LDSO_ARCH "powerpc"
+#ifdef _SOFT_FLOAT
+#define FP_SUFFIX "-sf"
+#else
+#define FP_SUFFIX ""
+#endif
+
+#define LDSO_ARCH "powerpc" FP_SUFFIX
 
 #define TPOFF_K (-0x7000)
 

configure

@@ -621,6 +621,10 @@ trycppif "_MIPSEL || __MIPSEL || __MIPSEL__" "$t" && SUBARCH=${SUBARCH}el
 trycppif __mips_soft_float "$t" && SUBARCH=${SUBARCH}-sf
 fi
 
+if test "$ARCH" = "powerpc" ; then
+trycppif _SOFT_FLOAT "$t" && SUBARCH=${SUBARCH}-sf
+fi
+
 test "$ARCH" = "microblaze" && trycppif __MICROBLAZEEL__ "$t" \
 && SUBARCH=${SUBARCH}el
 

src/fenv/powerpc/fenv-sf.c

+#ifdef _SOFT_FLOAT
+#include "../fenv.c"
+#endif

src/fenv/powerpc/fenv.s → src/fenv/powerpc/fenv.S

+#ifndef _SOFT_FLOAT
 .global feclearexcept
 .type feclearexcept,@function
 feclearexcept:
 	andis. 3,3,0x3e00
-	# if (r3 & FE_INVALID) r3 |= all_invalid_flags
+	/* if (r3 & FE_INVALID) r3 |= all_invalid_flags */
 	andis. 0,3,0x2000
 	stwu 1,-16(1)
 	beq- 0,1f
 	oris 3,3,0x01f8
 	ori  3,3,0x0700
 1:
-	# note: fpscr contains various fpu status and control
-	# flags and we dont check if r3 may alter other flags
-	# than the exception related ones
-	# fpscr &= ~r3
+	/*
+	 * note: fpscr contains various fpu status and control
+	 * flags and we dont check if r3 may alter other flags
+	 * than the exception related ones
+	 * ufpscr &= ~r3
+	 */
 	mffs 0
 	stfd 0,8(1)
 	lwz 9,12(1)
@@ -21,7 +24,7 @@ feclearexcept:
 	lfd 0,8(1)
 	mtfsf 255,0
 
-	# return 0
+	/* return 0 */
 	li 3,0
 	addi 1,1,16
 	blr
@@ -30,13 +33,13 @@ feclearexcept:
 .type feraiseexcept,@function
 feraiseexcept:
 	andis. 3,3,0x3e00
-	# if (r3 & FE_INVALID) r3 |= software_invalid_flag
+	/* if (r3 & FE_INVALID) r3 |= software_invalid_flag */
 	andis. 0,3,0x2000
 	stwu 1,-16(1)
 	beq- 0,1f
 	ori 3,3,0x0400
 1:
-	# fpscr |= r3
+	/* fpscr |= r3 */
 	mffs 0
 	stfd 0,8(1)
 	lwz 9,12(1)
@@ -45,7 +48,7 @@ feraiseexcept:
 	lfd 0,8(1)
 	mtfsf 255,0
 
-	# return 0
+	/* return 0 */
 	li 3,0
 	addi 1,1,16
 	blr
@@ -54,7 +57,7 @@ feraiseexcept:
 .type fetestexcept,@function
 fetestexcept:
 	andis. 3,3,0x3e00
-	# return r3 & fpscr
+	/* return r3 & fpscr */
 	stwu 1,-16(1)
 	mffs 0
 	stfd 0,8(1)
@@ -66,7 +69,7 @@ fetestexcept:
 .global fegetround
 .type fegetround,@function
 fegetround:
-	# return fpscr & 3
+	/* return fpscr & 3 */
 	stwu 1,-16(1)
 	mffs 0
 	stfd 0,8(1)
@@ -78,8 +81,10 @@ fegetround:
 .global __fesetround
 .type __fesetround,@function
 __fesetround:
-	# note: invalid input is not checked, r3 < 4 must hold
-	# fpscr = (fpscr & -4U) | r3
+	/*
+	 * note: invalid input is not checked, r3 < 4 must hold
+	 * fpscr = (fpscr & -4U) | r3
+	 */
 	stwu 1,-16(1)
 	mffs 0
 	stfd 0,8(1)
@@ -90,7 +95,7 @@ __fesetround:
 	lfd 0,8(1)
 	mtfsf 255,0
 
-	# return 0
+	/* return 0 */
 	li 3,0
 	addi 1,1,16
 	blr
@@ -98,10 +103,10 @@ __fesetround:
 .global fegetenv
 .type fegetenv,@function
 fegetenv:
-	# *r3 = fpscr
+	/* *r3 = fpscr */
 	mffs 0
 	stfd 0,0(3)
-	# return 0
+	/* return 0 */
 	li 3,0
 	blr
 
@@ -115,9 +120,10 @@ fesetenv:
 	.zero 8
 2:	mflr 3
 	mtlr 4
-1:	# fpscr = *r3
+1:	/* fpscr = *r3 */
 	lfd 0,0(3)
 	mtfsf 255,0
-	# return 0
+	/* return 0 */
 	li 3,0
 	blr
+#endif

src/setjmp/powerpc/longjmp.s → src/setjmp/powerpc/longjmp.S

@@ -4,19 +4,21 @@
 	.type   longjmp,@function
 _longjmp:
 longjmp:
-# void longjmp(jmp_buf env, int val);
-# put val into return register and restore the env saved in setjmp
-# if val(r4) is 0, put 1 there.
-	# 0) move old return address into r0
+	/*
+	 * void longjmp(jmp_buf env, int val);
+	 * put val into return register and restore the env saved in setjmp
+	 * if val(r4) is 0, put 1 there.
+	 */
+	/* 0) move old return address into r0 */
 	lwz 0, 0(3)
-	# 1) put it into link reg
+	/* 1) put it into link reg */
 	mtlr 0
-	#2 ) restore stack ptr
+	/* 2 ) restore stack ptr */
 	lwz 1, 4(3)
-	#3) restore control reg
+	/* 3) restore control reg */
 	lwz 0, 8(3)
 	mtcr 0
-	#4) restore r14-r31
+	/* 4) restore r14-r31 */
 	lwz 14, 12(3)
 	lwz 15, 16(3)
 	lwz 16, 20(3)
@@ -35,6 +37,7 @@ longjmp:
 	lwz 29, 72(3)
 	lwz 30, 76(3)
 	lwz 31, 80(3)
+#ifndef _SOFT_FLOAT
 	lfd 14,88(3)
 	lfd 15,96(3)
 	lfd 16,104(3)
@@ -53,10 +56,11 @@ longjmp:
 	lfd 29,208(3)
 	lfd 30,216(3)
 	lfd 31,224(3)
-	#5) put val into return reg r3
+#endif
+	/* 5) put val into return reg r3 */
 	mr 3, 4
 
-	#6) check if return value is 0, make it 1 in that case
+	/* 6) check if return value is 0, make it 1 in that case */
 	cmpwi cr7, 4, 0
 	bne cr7, 1f
 	li 3, 1

src/setjmp/powerpc/setjmp.s → src/setjmp/powerpc/setjmp.S

@@ -10,15 +10,15 @@ ___setjmp:
 __setjmp:
 _setjmp:
 setjmp:
-	# 0) store IP int 0, then into the jmpbuf pointed to by r3 (first arg)
+	/* 0) store IP int 0, then into the jmpbuf pointed to by r3 (first arg) */
 	mflr 0
 	stw 0, 0(3)
-	# 1) store reg1 (SP)
+	/* 1) store reg1 (SP) */
 	stw 1, 4(3)
-	# 2) store cr
+	/* 2) store cr */
 	mfcr 0
 	stw 0, 8(3)
-	# 3) store r14-31
+	/* 3) store r14-31 */
 	stw 14, 12(3)
 	stw 15, 16(3)
 	stw 16, 20(3)
@@ -37,6 +37,7 @@ setjmp:
 	stw 29, 72(3)
 	stw 30, 76(3)
 	stw 31, 80(3)
+#ifndef _SOFT_FLOAT
 	stfd 14,88(3)
 	stfd 15,96(3)
 	stfd 16,104(3)
@@ -55,7 +56,8 @@ setjmp:
 	stfd 29,208(3)
 	stfd 30,216(3)
 	stfd 31,224(3)
-	# 4) set return value to 0
+#endif
+	/* 4) set return value to 0 */
 	li 3, 0
-	# 5) return
+	/* 5) return */
 	blr