Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 18 7月, 2016 1 次提交
  3. 15 7月, 2016 1 次提交
  5. 13 7月, 2016 1 次提交
  7. 11 7月, 2016 1 次提交
  9. 10 7月, 2016 1 次提交
  11. 09 7月, 2016 3 次提交
  13. 01 7月, 2016 1 次提交
  15. 28 6月, 2016 3 次提交
  17. 23 6月, 2016 1 次提交
  19. 01 6月, 2016 1 次提交
  21. 31 5月, 2016 1 次提交
    • J
      cfg80211: Allow cfg80211_connect_result() errors to be distinguished · bf1ecd21
      由 Jouni Malinen 提交于 
      Previously, the status parameter to cfg80211_connect_result() was
documented as using WLAN_STATUS_UNSPECIFIED_FAILURE (1) when the real
status code for the failure is not known. This value can be used by an
AP (and often is) and as such, user space cannot distinguish between
explicitly rejected authentication/association and not being able to
even try to associate or not receiving a response from the AP.

Add a new inline function, cfg80211_connect_timeout(), to be used when
the driver knows that the connection attempt failed due to a reason
where connection could not be attempt or no response was received from
the AP. The internal functions now allow a negative status value (-1) to
be used as an indication of this special case. This results in the
NL80211_ATTR_TIMED_OUT to be added to the NL80211_CMD_CONNECT event to
allow user space to determine this case was hit. For backwards
compatibility, NL80211_STATUS_CODE with the value
WLAN_STATUS_UNSPECIFIED_FAILURE is still indicated in the event in such
a case.
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com>
[johannes: fix cfg80211_connect_bss() prototype to use int for status,
 add cfg80211_connect_timeout() to docbook, fix docbook]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
      bf1ecd21
  23. 30 5月, 2016 1 次提交
    • J
      Documentation/sphinx: add basic working Sphinx configuration and build · 22cba31b
      由 Jani Nikula 提交于 
      Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.

At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.

All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.

There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.

If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.

Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.

Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.

This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      22cba31b
  25. 23 5月, 2016 1 次提交
    • V
      drm: Add helper for DP++ adaptors · b3daa5ef
      由 Ville Syrjälä 提交于 
      Add a helper which aids in the identification of DP dual mode
(aka. DP++) adaptors. There are several types of adaptors
specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI

Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors
may go as high as 300MHz and they provide a register informing the
source device what the actual limit is. Supposedly also type 1 adaptors
may optionally implement this register. This TMDS clock limit is the
main reason why we need to identify these adaptors.

Type 1 adaptors provide access to their internal registers and the sink
DDC bus through I2C. Type 2 adaptors provide this access both via I2C
and I2C-over-AUX. A type 2 source device may choose to implement either
of these methods. If a source device implements the I2C-over-AUX
method, then the driver will obviously need specific support for such
adaptors since the port is driven like an HDMI port, but DDC
communication happes over the AUX channel.

This helper should be enough to identify the adaptor type (some
type 1 DVI adaptors may be a slight exception) and the maximum TMDS
clock limit. Another feature that may be available is control over
the TMDS output buffers on the adaptor, possibly allowing for some
power saving when the TMDS link is down.

Other user controllable features that may be available in the adaptors
are downstream i2c bus speed control when using i2c-over-aux, and
some control over the CEC pin. I chose not to provide any helper
functions for those since I have no use for them in i915 at this time.
The rest of the registers in the adaptor are mostly just information,
eg. IEEE OUI, hardware and firmware revision, etc.

v2: Pass adaptor type to helper functions to ease driver implementation
    Fix a bunch of typoes (Paulo)
    Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know
    the type (Paulo)
    Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo)
    Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to
    ease future LSPCON enabling
    Remove the unused DP_DUAL_MODE_LAST_RESERVED define
v3: Fix kernel doc function argument descriptions (Jani)
    s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs
    Add kernel doc for enum drm_dp_dual_mode_type
    Actually build the docs
    Fix more typoes
v4: Adjust code indentation of type2 adaptor detection (Shashank)
    Add debug messages for failurs cases (Shashank)
v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo)

Cc: stable@vger.kernel.org
Cc: Tore Anderson <tore@fud.no>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit ede53344)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      b3daa5ef
  27. 20 5月, 2016 1 次提交
  29. 12 5月, 2016 1 次提交
  31. 06 5月, 2016 1 次提交
  33. 03 5月, 2016 1 次提交
  35. 30 4月, 2016 1 次提交
  37. 29 4月, 2016 1 次提交
  39. 28 4月, 2016 1 次提交
  41. 26 4月, 2016 1 次提交
  43. 25 4月, 2016 2 次提交
  45. 21 4月, 2016 4 次提交
  47. 15 4月, 2016 1 次提交
  49. 12 4月, 2016 1 次提交
  51. 22 3月, 2016 1 次提交
  53. 17 3月, 2016 1 次提交
  55. 08 3月, 2016 1 次提交
  57. 06 3月, 2016 1 次提交
    • R
      usb: devio: Add ioctl to disallow detaching kernel USB drivers. · d883f52e
      由 Reilly Grant 提交于 
      The new USBDEVFS_DROP_PRIVILEGES ioctl allows a process to voluntarily
relinquish the ability to issue other ioctls that may interfere with
other processes and drivers that have claimed an interface on the
device.

This commit also includes a simple utility to be able to test the
ioctl, located at Documentation/usb/usbdevfs-drop-permissions.c

Example (with qemu-kvm's input device):

    $ lsusb
    ...
    Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd

    $ usb-devices
    ...
    C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=02 Driver=usbhid

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    OK: privileges dropped!
    Available options:
    [0] Exit now
    [1] Reset device. Should fail if device is in use
    [2] Claim 4 interfaces. Should succeed where not in use
    [3] Narrow interface permission mask
    Which option shall I run?: 1
    ERROR: USBDEVFS_RESET failed! (1 - Operation not permitted)
    Which test shall I run next?: 2
    ERROR claiming if 0 (1 - Operation not permitted)
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
    Which test shall I run next?: 0

After unbinding usbhid:

    $ usb-devices
    ...
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=02 Driver=(none)

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    ...
    Which option shall I run?: 2
    OK: claimed if 0
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
    Which test shall I run next?: 1
    OK: USBDEVFS_RESET succeeded
    Which test shall I run next?: 0

After unbinding usbhid and restricting the mask:

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    ...
    Which option shall I run?: 3
    Insert new mask: 0
    OK: privileges dropped!
    Which test shall I run next?: 2
    ERROR claiming if 0 (1 - Operation not permitted)
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
Signed-off-by: NReilly Grant <reillyg@chromium.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NEmilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d883f52e
  59. 03 3月, 2016 1 次提交
  61. 27 2月, 2016 2 次提交