A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).

This is my attempt to quiet them down and keep it less confusing
for the end user.  What I did is print the message for cpu0 and
save it for future comparisons.  If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.

Before the change, you would see something like:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1
    NMI watchdog enabled, takes one hw-pmu counter.
     #2
    NMI watchdog enabled, takes one hw-pmu counter.
     #3 Ok.
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 4 CPUs
    Total of 4 processors activated (22607.24 BogoMIPS).

After the change, it is simplified to:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs

V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups
Reported-and-tested-by: NNathan Zimmer <nzimmer@sgi.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix lots of new kernel-doc warnings in kernel/sched/fair.c:

  Warning(kernel/sched/fair.c:3625): No description found for parameter 'env'
  Warning(kernel/sched/fair.c:3625): Excess function parameter 'sd' description in 'update_sg_lb_stats'
  Warning(kernel/sched/fair.c:3735): No description found for parameter 'env'
  Warning(kernel/sched/fair.c:3735): Excess function parameter 'sd' description in 'update_sd_pick_busiest'
  Warning(kernel/sched/fair.c:3735): Excess function parameter 'this_cpu' description in 'update_sd_pick_busiest'
  .. more warnings
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 40af1bbd.

It's horribly and utterly broken for at least the following reasons:

 - calling sync_mm_rss() from mmput() is fundamentally wrong, because
   there's absolutely no reason to believe that the task that does the
   mmput() always does it on its own VM.  Example: fork, ptrace, /proc -
   you name it.

 - calling it *after* having done mmdrop() on it is doubly insane, since
   the mm struct may well be gone now.

 - testing mm against NULL before you call it is insane too, since a
NULL mm there would have caused oopses long before.

.. and those are just the three bugs I found before I decided to give up
looking for me and revert it asap.  I should have caught it before I
even took it, but I trusted Andrew too much.

Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm->rss_stat counters have per-task delta: task->rss_stat.  Before
changing task->mm pointer the kernel must flush this delta with
sync_mm_rss().

do_exit() already calls sync_mm_rss() to flush the rss-counters before
committing the rss statistics into task->signal->maxrss, taskstats,
audit and other stuff.  Unfortunately the kernel does this before
calling mm_release(), which can call put_user() for processing
task->clear_child_tid.  So at this point we can trigger page-faults and
task->rss_stat becomes non-zero again.  As a result mm->rss_stat becomes
inconsistent and check_mm() will print something like this:

| BUG: Bad rss-counter state mm:ffff88020813c380 idx:1 val:-1
| BUG: Bad rss-counter state mm:ffff88020813c380 idx:2 val:1

This patch moves sync_mm_rss() into mm_release(), and moves mm_release()
out of do_exit() and calls it earlier.  After mm_release() there should
be no pagefaults.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>		[3.4.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit b7643757 ("procfs: mark thread stack correctly in
proc/<pid>/maps") the stack allocated via clone() is marked in
/proc/<pid>/maps as [stack:%d] thus it might be out of the former
mm->start_stack/end_stack values (and even has some custom VMA flags
set).

So to be able to restore mm->start_stack/end_stack drop vma flags test,
but still require the underlying VMA to exist.

As always note this feature is under CONFIG_CHECKPOINT_RESTORE and
requires CAP_SYS_RESOURCE to be granted.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Zero is written at clear_tid_address when the process exits.  This
functionality is used by pthread_join().

We already have sys_set_tid_address() to change this address for the
current task but there is no way to obtain it from user space.

Without the ability to find this address and dump it we can't restore
pthread'ed apps which call pthread_join() once they have been restored.

This patch introduces the PR_GET_TID_ADDRESS prctl option which allows
the current process to obtain own clear_tid_address.

This feature is available iif CONFIG_CHECKPOINT_RESTORE is set.

[akpm@linux-foundation.org: fix prctl numbering]
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Pedro Alves <palves@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure the address being set is greater than mmap_min_addr (as
suggested by Kees Cook).
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A fix for commit b32dfe37 ("c/r: prctl: add ability to set new
mm_struct::exe_file").

After removing mm->num_exe_file_vmas kernel keeps mm->exe_file until
final mmput(), it never becomes NULL while task is alive.

We can check for other mapped files in mm instead of checking
mm->num_exe_file_vmas, and mark mm with flag MMF_EXE_FILE_CHANGED in
order to forbid second changing of mm->exe_file.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick()
calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the
next wakeup time based on the timer wheels.  Only later, when actually
entering the idle loop, rcu_prepare_for_idle() will be invoked.  In some
cases, rcu_prepare_for_idle() will post timers to wake the CPU back up.
But all for naught: The next wakeup time for the CPU has already been
computed, and posting a timer afterwards does not force that wakeup
time to be recomputed.  This means that rcu_prepare_for_idle()'s have
no effect.

This is not a problem on a busy system because something else will wake
up the CPU soon enough.  However, on lightly loaded systems, the CPU
might stay asleep for a considerable length of time.  If that CPU has
a callback that the rest of the system is waiting on, the system might
run very slowly or (in theory) even hang.

This commit avoids this problem by having rcu_needs_cpu() give
tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU
to wake back up, which tick_nohz_stop_sched_tick() takes into account
when programming the CPU's wakeup time.  An alternative approach is
for rcu_prepare_for_idle() to use hrtimers instead of normal timers,
but timers are much more efficient than are hrtimers for frequently
and repeatedly posting and cancelling a given timer, which is exactly
what RCU_FAST_NO_HZ does.
Reported-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>

The RCU_FAST_NO_HZ code relies on a number of per-CPU variables.
This works, but is hidden from someone scanning the data structures
in rcutree.h.  This commit therefore converts these per-CPU variables
to fields in the per-CPU rcu_dynticks structures.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>

In the current code, a short dyntick-idle interval (where there is
at least one non-lazy callback on the CPU) and a long dyntick-idle
interval (where there are only lazy callbacks on the CPU) are traced
identically, which can be less than helpful.  This commit therefore
emits different event traces in these two cases.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>

In the present implementations of CPU hotplug, the outgoing CPU is
guaranteed to run its stop-machine process on the way out, which
will guarantee that RCU_FAST_NO_HZ forces the CPU out of dyntick-idle
mode.

However, new versions of CPU hotplug might not work this way.  This
commit therefore removes this design constraint by explicitly notifying
CPUs when they adopt non-lazy RCU callbacks.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>

A recent update to have tracing_on/off() only affect the ftrace ring
buffers instead of all ring buffers had a cut and paste error.
The tracing_off() did the exact same thing as tracing_on() and
would not actually turn off tracing. Unfortunately, tracing_off()
is more important to be working than tracing_on() as this is a key
development tool, as it lets the developer turn off tracing as soon
as a problem is discovered. It is also used by panic and oops code.

This bug also breaks the 'echo func:traceoff > set_ftrace_filter'

Cc: <stable@vger.kernel.org> # 3.4
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It does not get processed because sched_domain_level_max is 0 at the
time that setup_relax_domain_level() is run.

Simply accept the value as it is, as we don't know the value of
sched_domain_level_max until sched domain construction is completed.

Fix sched_relax_domain_level in cpuset.  The build_sched_domain() routine calls
the set_domain_attribute() routine prior to setting the sd->level, however,
the set_domain_attribute() routine relies on the sd->level to decide whether
idle load balancing will be off/on.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add some code to validate assumptions we're making and output
warnings if they are not.

If this trigger we want to know about it.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alex Shi <lkml.alex@gmail.com>
Link: http://lkml.kernel.org/n/tip-6uc3wk5s9udxtdl9cnku0vtt@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Often when we run into mis-shapen topologies the balance iteration
fails to update the cpu power properly and we'll end up in /0 traps.

Always initialize the cpu-power to a semi-sane value so that we can
at least boot the machine, even if the load-balancer might not
function correctly.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3lbhyj25sr169ha7z3qht5na@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Weird topologies can lead to asymmetric domain setups. This needs
further consideration since these setups are typically non-minimal
too.

For now, make it work by adding an extra mask selecting which CPUs
are allowed to iterate up.

The topology that triggered it is the one from David Rientjes:

	10 20 20 30
	20 10 20 20
	20 20 10 20
	30 20 20 10

resulting in boxes that wouldn't even boot.
Reported-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3p86l9cuaqnxz7uxsojmz5rm@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Roland Dreier reported spurious, hard to trigger lockdep warnings
within the scheduler - without any real lockup.

This bit gives us the right clue:

> [89945.640512]  [<ffffffff8103fa1a>] double_lock_balance+0x5a/0x90
> [89945.640568]  [<ffffffff8104c546>] push_rt_task+0xc6/0x290

if you look at that code you'll find the double_lock_balance() in
question is the one in find_lock_lowest_rq() [yay for inlining].

Now find_lock_lowest_rq() has a bug.. it fails to use
double_unlock_balance() in one exit path, if this results in a retry in
push_rt_task() we'll call double_lock_balance() again, at which point
we'll run into said lockdep confusion.
Reported-by: NRoland Dreier <roland@kernel.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337282386.4281.77.camel@twinsSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit cb83b629 ("sched/numa: Rewrite the CONFIG_NUMA sched
domain support") removed the NODE sched domain and started checking
if the node distance in SLIT table is farther than REMOTE_DISTANCE,
if so, it will lose the load balance chance at exec/fork/wake_affine
points.

But actually, even the node distance is farther than REMOTE_DISTANCE.

Modern CPUs also has QPI like connections, which ensures that memory
access is not too slow between nodes. So the above change in behavior
on NUMA machine causes a performance regression on various benchmarks:
hackbench, tbench, netperf, oltp, etc.

This patch will recover the scheduler behavior to old mode on all my
Intel platforms: NHM EP/EX, WSM EP, SNB EP/EP4S, and thus fixes the
perfromance regressions. (all of them just have 2 kinds distance, 10, 21)
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338965571-9812-1-git-send-email-alex.shi@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 6b43ae8a (ntp: Fix leap-second hrtimer livelock) broke the
leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to
wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC.

Adjust wall_to_monotonic when NTP inserted a leapsecond.
Reported-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NRichard Cochran <richardcochran@gmail.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1338400497-12420-1-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK
and picks default set_restore_sigmask() in linux/thread_info.h.  Kill the
ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones
get merged.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When we do restore we would like to have a way to setup a former
mm_struct::exe_file so that /proc/pid/exe would point to the original
executable file a process had at checkpoint time.

For this the PR_SET_MM_EXE_FILE code is introduced.  This option takes a
file descriptor which will be set as a source for new /proc/$pid/exe
symlink.

Note it allows to change /proc/$pid/exe if there are no VM_EXECUTABLE
vmas present for current process, simply because this feature is a special
to C/R and mm::num_exe_file_vmas become meaningless after that.

To minimize the amount of transition the /proc/pid/exe symlink might have,
this feature is implemented in one-shot manner.  Thus once changed the
symlink can't be changed again.  This should help sysadmins to monitor the
symlinks over all process running in a system.

In particular one could make a snapshot of processes and ring alarm if
there unexpected changes of /proc/pid/exe's in a system.

Note -- this feature is available iif CONFIG_CHECKPOINT_RESTORE is set and
the caller must have CAP_SYS_RESOURCE capability granted, otherwise the
request to change symlink will be rejected.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During checkpoint we dump whole process memory to a file and the dump
includes process stack memory.  But among stack data itself, the stack
carries additional parameters such as command line arguments, environment
data and auxiliary vector.

So when we do restore procedure and once we've restored stack data itself
we need to setup mm_struct::arg_start/end, env_start/end, so restored
process would be able to find command line arguments and environment data
it had at checkpoint time.  The same applies to auxiliary vector.

For this reason additional PR_SET_MM_(ARG_START | ARG_END | ENV_START |
ENV_END | AUXV) codes are introduced.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.

The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.

One of the ways for checking whether two tasks share e.g.  mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.

Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate.  So here is it --
__NR_kcmp.

It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.

Lookups for pids are done in the caller's PID namespace only.

At moment only x86 is supported and tested.

[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For those who doesn't need C/R functionality there is no need to control
last pid, ie the pid for the next fork() call.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Force SIGCHLD handling to SIG_IGN so that signals are not generated and so
that the children autoreap.  This increases the parallelize and in general
the speed of network namespace shutdown.

Note self reaping childrean can exist past zap_pid_ns_processess but they
will all be reaped before we allow the pid namespace init task with pid ==
1 to be reaped.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using task_active_pid_ns is more robust because it works even after we
have called exit_namespaces.  This change allows us to have parent
processes that are zombies.  Normally a zombie parent processes is crazy
and the last thing you would want to have but in the case of not letting
the init process of a pid namespace be reaped until all of it's children
are dead and reaped a zombie parent process is exactly what we want.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add more comments on clear_tasks_mm_cpumask, plus adds a runtime check:
the function is only suitable for offlined CPUs, and if called
inappropriately, the kernel should scream aloud.

[akpm@linux-foundation.org: tweak comment: s/walks up/walks/, use 80 cols]
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many architectures clear tasks' mm_cpumask like this:

	read_lock(&tasklist_lock);
	for_each_process(p) {
		if (p->mm)
			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
	}
	read_unlock(&tasklist_lock);

Depending on the context, the code above may have several problems,
such as:

1. Working with task->mm w/o getting mm or grabing the task lock is
   dangerous as ->mm might disappear (exit_mm() assigns NULL under
   task_lock(), so tasklist lock is not enough).

2. Checking for process->mm is not enough because process' main
   thread may exit or detach its mm via use_mm(), but other threads
   may still have a valid mm.

This patch implements a small helper function that does things
correctly, i.e.:

1. We take the task's lock while whe handle its mm (we can't use
   get_task_mm()/mmput() pair as mmput() might sleep);

2. To catch exited main thread case, we use find_lock_task_mm(),
   which walks up all threads and returns an appropriate task
   (with task lock held).

Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in
the new helper, instead we take the rcu read lock. We can do this
because the function is called after the cpu is taken down and marked
offline, so no new tasks will get this cpu set in their mm mask.
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Child should wake up the parent from vfork() only after finishing all
operations with shared mm.  There is no sense in using
CLONE_CHILD_CLEARTID together with CLONE_VFORK, but it looks more accurate
now.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In embedded systems, sometimes the same program (busybox) is the cause of
multiple warnings.  Outputting the pid with the program name in the
warning printk helps distinguish which instances of a program are using
the stack most.

This is a small patch, but useful.
Signed-off-by: NTim Bird <tim.bird@am.sony.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8f92054e ("CRED: Fix __task_cred()'s lockdep check and banner
comment"):

    add the following validation condition:

        task->exit_state >= 0

    to permit the access if the target task is dead and therefore
    unable to change its own credentials.

OK, but afaics currently this can only help wait_task_zombie() which calls
__task_cred() without rcu lock.

Remove this validation and change wait_task_zombie() to use task_uid()
instead.  This means we do rcu_read_lock() only to shut up the lockdep,
but we already do the same in, say, wait_task_stopped().

task_is_dead() should die, task->exit_state != 0 means that this task has
passed exit_notify(), only do_wait-like code paths should use this.

Unfortunately, we can't kill task_is_dead() right now, it has already
acquired buggy users in drivers/staging.  The fix already exists.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Warning(kernel/kmod.c:419): No description found for parameter 'depth'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we move call_usermodehelper_fns() to kmod.c file and EXPORT_SYMBOL it
we can avoid exporting all it's helper functions:
	call_usermodehelper_setup
	call_usermodehelper_setfns
	call_usermodehelper_exec
And make all of them static to kmod.c

Since the optimizer will see all these as a single call site it will
inline them inside call_usermodehelper_fns().  So we loose the call to
_fns but gain 3 calls to the helpers.  (Not that it matters)
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both kernel/sys.c && security/keys/request_key.c where inlining the exact
same code as call_usermodehelper_fns(); So simply convert these sites to
directly use call_usermodehelper_fns().
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

call_usermodehelper_freeinfo() is not used outside of kmod.c.  So unexport
it, and make it static to kmod.c
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NColin Cross <ccross@android.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>