fl->oif will always be zero on the input path, so there is no reason
to test for that.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All callers are under rcu_read_lock() protection already.

Rename to ip_check_mc_rcu() to make it even more clear.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/bnx2x/bnx2x_cmn.c

Add necessary alias to autoload ip6ip6 tunnel module.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When configs BRIDGE=y and IPV6=m, this build error occurs:

br_multicast.c:(.text+0xa3341): undefined reference to `ipv6_dev_get_saddr'

BRIDGE_IGMP_SNOOPING is boolean; if it were tristate, then adding
	depends on IPV6 || IPV6=n
to BRIDGE_IGMP_SNOOPING would be a good fix.  As it is currently,
making BRIDGE depend on the IPV6 config works.
Reported-by: NPatrick Schaaf <netdev@bof.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] mantis_pci: remove asm/pgtable.h include
  [media] tda829x: fix regression in probe functions
  [media] mceusb: don't claim multifunction device non-IR parts
  [media] nuvoton-cir: fix wake from suspend
  [media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411
  [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
  [media] cx25840: fix probing of cx2583x chips
  [media] cx23885: Remove unused 'err:' labels to quiet compiler warning
  [media] cx23885: Revert "Check for slave nack on all transactions"
  [media] DiB7000M: add pid filtering
  [media] Fix sysfs rc protocol lookup for rc-5-sz
  [media] au0828: fix VBI handling when in V4L2 streaming mode
  [media] ir-raw: Properly initialize the IR event (BZ#27202)
  [media] s2255drv: firmware re-loading changes
  [media] Fix double free of video_device in mem2mem_testdev
  [media] DM04/QQBOX memcpy to const char fix

This patch fixes an issue in OpenIPMI module where sometimes an ABORT command
is sent after sending an IPMI request to BMC causing the IPMI request to fail.
Signed-off-by: NYiCheng Doe <yicheng.doe@hp.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Acked-by: NTom Mingarelli <thomas.mingarelli@hp.com>
Tested-by: NAndy Cress <andy.cress@us.kontron.com>
Tested-by: NMika Lansirine <Mika.Lansirinne@stonesoft.com>
Tested-by: NBrian De Wolf <bldewolf@csupomona.edu>
Cc: Jean Michel Audet <Jean-Michel.Audet@ca.Kontron.com>
Cc: Jozef Sudelsky <jozef.sudolsky@elbiahosting.sk>
Acked-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs/dcache: allow d_obtain_alias() to return unhashed dentries
  Check for immutable/append flag in fallocate path
  sysctl: the include of rcupdate.h is only needed in the kernel
  fat: fix d_revalidate oopsen on NFS exports
  jfs: fix d_revalidate oopsen on NFS exports
  ocfs2: fix d_revalidate oopsen on NFS exports
  gfs2: fix d_revalidate oopsen on NFS exports
  fuse: fix d_revalidate oopsen on NFS exports
  ceph: fix d_revalidate oopsen on NFS exports
  reiserfs xattr ->d_revalidate() shouldn't care about RCU
  /proc/self is never going to be invalidated...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Initialize the broadcast assist unit base destination node id properly
  x86, numa: Fix numa_emulation code with memory-less node0
  x86, build: Make sure mkpiggy fails on read error

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix sched rt group scheduling when hierachy is enabled

* 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache
  perf symbols: Fix vmlinux path when not using --symfs

This reverts commit 951f3512

    drm/i915: Do not handle backlight combination mode specially

since this commit introduced other regressions due to untouched LBPC
register, e.g. the backlight dimmed after resume.

In addition to the revert, this patch includes a fix for the original
issue (weird backlight levels) by removing the wrong bit shift for
computing the current backlight level.
Also, including typo fixes (lpbc -> lbpc).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34524Acked-by: NIndan Zupancic <indan@nul.nu>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without this patch, inodes are not promptly freed on last close of an
unlinked file by an nfs client:

	client$ mount -tnfs4 server:/export/ /mnt/
	client$ tail -f /mnt/FOO
	...
	server$ df -i /export
	server$ rm /export/FOO
	(^C the tail -f)
	server$ df -i /export
	server$ echo 2 >/proc/sys/vm/drop_caches
	server$ df -i /export

the df's will show that the inode is not freed on the filesystem until
the last step, when it could have been freed after killing the client's
tail -f. On-disk data won't be deallocated either, leading to possible
spurious ENOSPC.

This occurs because when the client does the close, it arrives in a
compound with a putfh and a close, processed like:

	- putfh: look up the filehandle.  The only alias found for the
	  inode will be DCACHE_UNHASHED alias referenced by the filp
	  this, so it creates a new DCACHE_DISCONECTED dentry and
	  returns that instead.
	- close: closes the existing filp, which is destroyed
	  immediately by dput() since it's DCACHE_UNHASHED.
	- end of the compound: release the reference
	  to the current filehandle, and dput() the new
	  DCACHE_DISCONECTED dentry, which gets put on the
	  unused list instead of being destroyed immediately.

Nick Piggin suggested fixing this by allowing d_obtain_alias to return
the unhashed dentry that is referenced by the filp, instead of making it
create a new dentry.

Leave __d_find_alias() alone to avoid changing behavior of other
callers.

Also nfsd doesn't need all the checks of __d_find_alias(); any dentry,
hashed or unhashed, disconnected or not, should work.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The 5750 ASIC rev was never released as a PCI device.  It only exists as
a PCIe device.  This patch removes the code that supports the former
configuration.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the function that initializes the link configuration
closer to the place where the rest of the phy code is initialized.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the near future, the VAux switching decision process is going to get
more complicated.  This patch refines and consolidates the existing
algorithm in anticipation of the new scheme.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 895950c2, entitled
"tg3: Use DEFINE_PCI_DEVICE_TABLE" moved two pci device tables into the
global address space, but didn't declare them static and didn't prefix
them with "tg3_".  This patch fixes those problems.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds code to verify the checksum stored in the "RV" info
keyword of the RODATA VPD section.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tg3 NVRAM selftest actually fails when validating the checksum of
the legacy NVRAM format.  However, the test still reported success
because the last update of the return code was a success from the NVRAM
reads.  This patch fixes the code so that the error return code defaults
to a failure status.  Then the patch fixes the reason why the checsum
validation failed.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 2866d956, entitled
"tg3: Expand 5719 workaround" extended a 5719 A0 workaround to all
revisions of the chip.  There was a change that should have been a
part of that patch that was missed.  This patch adds the missing
piece.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the fallocate path the kernel doesn't check for the immutable/append
flag. It's possible to have a race condition in this scenario: an
application open a file in read/write and it does something, meanwhile
root set the immutable flag on the file, the application at that point
can call fallocate with success. In addition, we don't allow to do any
unreserve operation on an append only file but only the reserve one.
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fixes this built error:

include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... it returns an error unconditionally
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like in commit 44713b67
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like in commit 44713b67
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29252
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=30462

In commit d80bc0fd ("ipv6: Always
clone offlink routes.") we forced the kernel to always clone offlink
routes.

The reason we do that is to make sure we never bind an inetpeer to a
prefixed route.

The logic turned on here has existed in the tree for many years,
but was always off due to a protecting CPP define.  So perhaps
it's no surprise that there is a logic bug here.

The problem is that we canot clone a route that is already a
host route (ie. has DST_HOST set).  Because if we do, an identical
entry already exists in the routing tree and therefore the
ip6_rt_ins() call is going to fail.

This sets off a series of failures and high cpu usage, because when
ip6_rt_ins() fails we loop retrying this operation a few times in
order to handle a race between two threads trying to clone and insert
the same host route at the same time.

Fix this by simply using the route as-is when DST_HOST is set.

Reported-by: slash@ac.auone-net.jp
Reported-by: NErnst Sjöstrand <ernstp@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries: Disable VPNH feature
  powerpc/iseries: Fix early init access to lppaca

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

Fixes this build-check error:

  include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since a8f80e8f any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This feature triggers nasty races in the scheduler between the
rebuilding of the topology and the load balancing code, causing
the machine to hang.

Disable it for now until the races are fixed.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>