Now that we have struct fwnode_handle, we can use that to point to
ACPI companions from struct device objects instead of pointing to
struct acpi_device directly.

There are two benefits from that.  First, the somewhat ugly and
hackish struct acpi_dev_node can be dropped and, second, the same
struct fwnode_handle pointer can be used in the future to point
to other (non-ACPI) firmware device node types.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NGrant Likely <grant.likely@linaro.org>

The gpio_chip operations receive a pointer the gpio_chip struct which is
contained in the driver's private struct, yet the container_of call in those
functions point to the mfd struct defined in include/linux/mfd/tps65912.h.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NNicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The change:

7b8792bb
gpiolib: of: Correct error handling in of_get_named_gpiod_flags

assumed that only one gpio-chip is registred per of-node.
Some drivers register more than one chip per of-node, so
adjust the matching function of_gpiochip_find_and_xlate to
not stop looking for chips if a node-match is found and
the translation fails.

Cc: Stable <stable@vger.kernel.org>
Fixes: 7b8792bb ("gpiolib: of: Correct error handling in of_get_named_gpiod_flags")
Signed-off-by: NHans Holmberg <hans.holmberg@intel.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NTyler Hall <tylerwhall@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add support for PXA1928 GPIOs. The PXA1928 adds a 6th bank from previous
generations.
Signed-off-by: NJing Xiang <jxiang@marvell.com>
Signed-off-by: NXiangzhan Meng <mengxzh@marvell.com>
[robh: ported to 3.19 from vendor kernel]
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

In preparation to enable ARCH_MMP on ARM64, the include of mach/irqs.h
must be eliminated. mach/irqs.h was being included for IRQ_GPIO{0,1},
but these IRQs are always passed in as resources now. We can use irq0
and irq1 and get rid of IRQ_GPIOx. Get rid of the ifdef in the process
as it is no longer needed.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Cast the struct gpio_chip into a max732x_chip using an inline
macro and move the assignment to the variable declaration
to save lines and simplify things.

Cc: Semen Protsenko <semen.protsenko@globallogic.com>
Acked-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

gpiolib uses a fixed string for the suffixes and defines it at 32 bytes.
Later in the code snprintf is used with this fixed value of 32. Using
sizeof() is safer in case the size for the suffixes is ever changed.
Signed-off-by: NOlliver Schinagl <oliver@schinagl.nl>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This adds a set_multiple function to the MAX732x GPIO driver,
allowing for performance gains when using gpiod_set_array().
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fix memory leak in the gpio sysfs interface due to failure to drop
reference to device returned by class_find_device when setting the
gpio-line polarity.

Fixes: 07697461 ("gpiolib: add support for changing value polarity
in sysfs")
Cc: stable <stable@vger.kernel.org>	# v2.6.33
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fix memory leak in the gpio sysfs interface due to failure to drop
reference to device returned by class_find_device when creating a link.

Fixes: a4177ee7 ("gpiolib: allow exported GPIO nodes to be named
using sysfs links")
Cc: stable <stable@vger.kernel.org>	# v2.6.32
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

As a part of driver consolidation, move GPIO-related IRQ code to
drivers/gpio/gpio-sa1100.c. The code does not use GPIOLIB_IRQCHIP (yet),
because sa1100 does not have a device for gpios, which is a requirement
for GPIOLIB_IRQCHIP. This will be the next step.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Low GPIO pins use an interrupt in SC interrupts space. However it's
possible to handle them as if all the GPIO interrupts are instead tied
to single GPIO handler, which later decodes GEDR register and
chain-calls next IRQ handler. So split first 11 interrupts into system
part (IRQ_GPIO0_SC - IRQ_GPIO10_SC) which work exactly like the rest of
system controller interrupts and real GPIO interrupts
(IRQ_GPIO0..IRQ_GPIO10). A single handler sa1100_gpio_handler then
decodes and calls next handler.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Consolidating similar algorithms into common functions to make
GPIO SCH simpler and manageable.
Signed-off-by: NChang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use devm_kstrdup to simplify the error handling path.
Also return -ENOMEM instead of 0 if devm_kstrdup fails.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

On my previous patch I was overly hasty and made the suffixes string
array
const char const *suffixes, instaed of const char * const suffixes. This
patch corrects that
Signed-off-by: NOlliver Schinagl <oliver@schinagl.nl>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Create default gpio base if neither device node nor
platform data is defined.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Tested-by: NAntonio Fiol <antonio@fiol.es>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Similar to omap_gpio_irq_type() let's make sure that the GPIO
is usable as an interrupt if the platform init code did not
call gpio_request(). Otherwise we can get invalid device access
after setup_irq():

WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x214/0x340()
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Idle): Data Access in Supervisor mode during Functional access
...
[<c05f21e4>] (__irq_svc) from [<c05f1974>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[<c05f1974>] (_raw_spin_unlock_irqrestore) from [<c00914a8>] (__setup_irq+0x244/0x530)
[<c00914a8>] (__setup_irq) from [<c00917d4>] (setup_irq+0x40/0x8c)
[<c00917d4>] (setup_irq) from [<c0039c8c>] (omap_system_dma_probe+0x1d4/0x2b4)
[<c0039c8c>] (omap_system_dma_probe) from [<c03b2200>] (platform_drv_probe+0x44/0xa4)
...

We can fix this the same way omap_gpio_irq_type() is handling it.

Note that the long term solution is to change the gpio-omap driver
to handle the banks as separate driver instances. This will allow
us to rely on just runtime PM for tracking the bank specific state.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Make OF conditional on CONFIG_OF_GPIO, rename and register
the match table.
Reported-by: NMike Krinkin <krinkin.m.u@gmail.com>
Cc: Wei Chen <Wei.Chen@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since d621e8ba (Create of_mm_gpiochip_remove), there is a
counterpart for of_mm_gpiochip_add.

This patch implements the remove function of the driver making use of
it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Driver for Fujitsu MB86S7x SoCs that have a memory mapped GPIO controller.
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: NAndy Green <andy.green@linaro.org>
Signed-off-by: NVincent Yang <Vincent.Yang@tw.fujitsu.com>
Signed-off-by: NTetsuya Nuriya <nuriya.tetsuya@jp.fujitsu.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This way we do not need to transverse the device tree manually.

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: NPeter Korsgaard <peter@korsgaard.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since d621e8ba (Create of_mm_gpiochip_remove), there is a
counterpart for of_mm_gpiochip_add.

This patch implements the remove function of the driver making use of
it.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since d621e8ba (Create of_mm_gpiochip_remove), there is a
counterpart for of_mm_gpiochip_add.

This patch implements the remove function of the driver making use of
it.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: John Crispin <blogic@openwrt.org>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Instead of parsing manually the shadow content, use the much simpler
helper of_property_read_u32.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Do not replicate code from of_mm_gpiochip_add.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: John Crispin <blogic@openwrt.org>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Replace kzalloc with the device managed devm_kzalloc

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: John Crispin <blogic@openwrt.org>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since d621e8ba (Create of_mm_gpiochip_remove), there is a
counterpart for of_mm_gpiochip_add.

This patch implements the remove function of the driver making use of
it.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Require that device tree be used with STMPE (all platforms use this)
and enforce OF_GPIO, then delete the platform data.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Driver for standby GPIO controller of APM X-Gene SoCs on arm64.
Signed-off-by: NY Vo <yvo@apm.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Current sx150x gpio expander driver doesn't support
DTS. Now we added dts support for this driver.
Signed-off-by: NWei Chen <Wei.Chen@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add set_multiple functions to the generic driver for memory-mapped GPIO
controllers to improve performance when setting multiple outputs
simultaneously.
Signed-off-by: NRojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Commit ffe4770b ("gpio-amd8111: check ioport_map return value")
adds the error check on ioport_map(). It doesnt release the requested region.

On failure this patch release the region that has requested before.
Signed-off-by: NVarka Bhadram <varkab@cdac.in>
Reported-by: NAlexandre Courbot <gnurou@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Include linux/slab.h to fix following compilation error.

drivers/gpio/gpio-ge.c: In function ‘gef_gpio_probe’:
drivers/gpio/gpio-ge.c:95:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration]
  kfree(bgc->gc.label);
Signed-off-by: NKamlakant Patel <kamlakant.patel@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch converts GE GPIO driver to use basic_mmio_gpio
generic library.
Signed-off-by: NKamlakant Patel <kamlakant.patel@linaro.org>
Acked-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

of_get_named_gpiod_flags fails with -EPROBE_DEFER in cases
where the gpio chip is available and the GPIO translation fails.

This causes drivers to be re-probed erroneusly, and hides the
real problem(i.e. the GPIO number being out of range).

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NHans Holmberg <hans.holmberg@intel.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fix the coding style issue by adding a blank line after declaration
Signed-off-by: NMohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch was derived from next one:
"gpio: fix pca953x set_type 'scheduling while atomic' bug".

After adding entry that consumes max732x GPIO as interrupt line to dts
file, deadlock appears somewhere in max732x probe function.

Deadlock caught by lockdep (from kernel log):
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>>
[    0.473419] ======================================================
[    0.473419] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
[    0.473449] 3.x.xx-xxxxx-xxxxxxxx-dirty #2 Tainted: G        W
[    0.473449] ------------------------------------------------------
[    0.473449] swapper/0/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[    0.473449]  (&lock->wait_lock){+.+...}, at: [<c072e350>] rt_mutex_trylock+0xc/0x74
[    0.473480]
[    0.473480] and this task is already holding:
[    0.473510]  (&chip->lock){......}, at: [<c0314514>] max732x_gpio_set_value+0x2c/0xa4
[    0.473541] which would create a new lock dependency:
[    0.473541]  (&chip->lock){......} -> (&lock->wait_lock){+.+...}

...

[    0.474273]  *** DEADLOCK ***
[    0.474273]
[    0.474273] 5 locks held by swapper/0/1:
[    0.474273]  #0:  (&__lockdep_no_validate__){......}, at: [<c03b2328>] __driver_attach+0x48/0x98
[    0.474304]  #1:  (&__lockdep_no_validate__){......}, at: [<c03b2338>] __driver_attach+0x58/0x98
[    0.474334]  #2:  (&chip->irq_lock){+.+...}, at: [<c0313e3c>] max732x_irq_bus_lock+0x14/0x20
[    0.474365]  #3:  (&irq_desc_lock_class){-.....}, at: [<c00a65a4>] __irq_get_desc_lock+0x48/0x88
[    0.474365]  #4:  (&chip->lock){......}, at: [<c0314514>] max732x_gpio
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: NSemen Protsenko <semen.protsenko@globallogic.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NSemen Protsenko <semen.protsenko@globallogic.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>