Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 5 年

通知 16
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 05 6月, 2014 2 次提交
  3. 02 6月, 2014 1 次提交
    • J
      locks: ensure that fl_owner is always initialized properly in flock and lease codepaths · 130d1f95
      由 Jeff Layton 提交于 
      Currently, the fl_owner isn't set for flock locks. Some filesystems use
byte-range locks to simulate flock locks and there is a common idiom in
those that does:

    fl->fl_owner = (fl_owner_t)filp;
    fl->fl_start = 0;
    fl->fl_end = OFFSET_MAX;

Since flock locks are generally "owned" by the open file description,
move this into the common flock lock setup code. The fl_start and fl_end
fields are already set appropriately, so remove the unneeded setting of
that in flock ops in those filesystems as well.

Finally, the lease code also sets the fl_owner as if they were owned by
the process and not the open file description. This is incorrect as
leases have the same ownership semantics as flock locks. Set them the
same way. The lease code doesn't actually use the fl_owner value for
anything, so this is more for consistency's sake than a bugfix.
Reported-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJeff Layton <jlayton@poochiereds.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (Staging portion)
Acked-by: NJ. Bruce Fields <bfields@fieldses.org>
      130d1f95
  5. 08 4月, 2014 1 次提交
  7. 04 4月, 2014 1 次提交
    • J
      mm + fs: store shadow entries in page cache · 91b0abe3
      由 Johannes Weiner 提交于 
      Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      91b0abe3
  9. 26 1月, 2014 2 次提交
  11. 10 1月, 2014 1 次提交
  13. 24 11月, 2013 8 次提交
  15. 16 11月, 2013 1 次提交
  17. 25 10月, 2013 1 次提交
  19. 28 9月, 2013 1 次提交
    • D
      FS-Cache: Provide the ability to enable/disable cookies · 94d30ae9
      由 David Howells 提交于 
      Provide the ability to enable and disable fscache cookies.  A disabled cookie
will reject or ignore further requests to:

	Acquire a child cookie
	Invalidate and update backing objects
	Check the consistency of a backing object
	Allocate storage for backing page
	Read backing pages
	Write to backing pages

but still allows:

	Checks/waits on the completion of already in-progress objects
	Uncaching of pages
	Relinquishment of cookies

Two new operations are provided:

 (1) Disable a cookie:

	void fscache_disable_cookie(struct fscache_cookie *cookie,
				    bool invalidate);

     If the cookie is not already disabled, this locks the cookie against other
     dis/enablement ops, marks the cookie as being disabled, discards or
     invalidates any backing objects and waits for cessation of activity on any
     associated object.

     This is a wrapper around a chunk split out of fscache_relinquish_cookie(),
     but it reinitialises the cookie such that it can be reenabled.

     All possible failures are handled internally.  The caller should consider
     calling fscache_uncache_all_inode_pages() afterwards to make sure all page
     markings are cleared up.

 (2) Enable a cookie:

	void fscache_enable_cookie(struct fscache_cookie *cookie,
				   bool (*can_enable)(void *data),
				   void *data)

     If the cookie is not already enabled, this locks the cookie against other
     dis/enablement ops, invokes can_enable() and, if the cookie is not an
     index cookie, will begin the procedure of acquiring backing objects.

     The optional can_enable() function is passed the data argument and returns
     a ruling as to whether or not enablement should actually be permitted to
     begin.

     All possible failures are handled internally.  The cookie will only be
     marked as enabled if provisional backing objects are allocated.

A later patch will introduce these to NFS.  Cookie enablement during nfs_open()
is then contingent on i_writecount <= 0.  can_enable() checks for a race
between open(O_RDONLY) and open(O_WRONLY/O_RDWR).  This simplifies NFS's cookie
handling and allows us to get rid of open(O_RDONLY) accidentally introducing
caching to an inode that's open for writing already.

One operation has its API modified:

 (3) Acquire a cookie.

	struct fscache_cookie *fscache_acquire_cookie(
		struct fscache_cookie *parent,
		const struct fscache_cookie_def *def,
		void *netfs_data,
		bool enable);

     This now has an additional argument that indicates whether the requested
     cookie should be enabled by default.  It doesn't need the can_enable()
     function because the caller must prevent multiple calls for the same netfs
     object and it doesn't need to take the enablement lock because no one else
     can get at the cookie before this returns.

Signed-off-by: David Howells <dhowells@redhat.com
      94d30ae9
  21. 18 9月, 2013 2 次提交
  23. 26 8月, 2013 1 次提交
    • W
      fs/9p: avoid accessing utsname after namespace has been torn down · 50192abe
      由 Will Deacon 提交于 
      During trinity fuzzing in a kvmtool guest, I stumbled across the
following:

Unable to handle kernel NULL pointer dereference at virtual address 00000004
PC is at v9fs_file_do_lock+0xc8/0x1a0
LR is at v9fs_file_do_lock+0x48/0x1a0
[<c01e2ed0>] (v9fs_file_do_lock+0xc8/0x1a0) from [<c0119154>] (locks_remove_flock+0x8c/0x124)
[<c0119154>] (locks_remove_flock+0x8c/0x124) from [<c00d9bf0>] (__fput+0x58/0x1e4)
[<c00d9bf0>] (__fput+0x58/0x1e4) from [<c0044340>] (task_work_run+0xac/0xe8)
[<c0044340>] (task_work_run+0xac/0xe8) from [<c002e36c>] (do_exit+0x6bc/0x8d8)
[<c002e36c>] (do_exit+0x6bc/0x8d8) from [<c002e674>] (do_group_exit+0x3c/0xb0)
[<c002e674>] (do_group_exit+0x3c/0xb0) from [<c002e6f8>] (__wake_up_parent+0x0/0x18)

I believe this is due to an attempt to access utsname()->nodename, after
exit_task_namespaces() has been called, leaving current->nsproxy->uts_ns
as NULL and causing the above dereference.

A similar issue was fixed for lockd in 9a1b6bf8 ("LOCKD: Don't call
utsname()->nodename from nlmclnt_setlockargs"), so this patch attempts
something similar for 9pfs.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      50192abe
  25. 30 7月, 2013 1 次提交
  27. 08 7月, 2013 2 次提交
  29. 29 6月, 2013 1 次提交
  31. 22 5月, 2013 1 次提交
    • L
      mm: change invalidatepage prototype to accept length · d47992f8
      由 Lukas Czerner 提交于 
      Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.

Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).

This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.

We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.

Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
      d47992f8
  33. 08 5月, 2013 1 次提交
  35. 04 3月, 2013 1 次提交
    • E
      fs: Limit sys_mount to only request filesystem modules. · 7f78e035
      由 Eric W. Biederman 提交于 
      Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Acked-by: NKees Cook <keescook@chromium.org>
Reported-by: NKees Cook <keescook@google.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      7f78e035
  37. 28 2月, 2013 8 次提交
  39. 26 2月, 2013 3 次提交
    • J
      vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op · ecf3d1f1
      由 Jeff Layton 提交于 
      The following set of operations on a NFS client and server will cause

    server# mkdir a
    client# cd a
    server# mv a a.bak
    client# sleep 30  # (or whatever the dir attrcache timeout is)
    client# stat .
    stat: cannot stat `.': Stale NFS file handle

Obviously, we should not be getting an ESTALE error back there since the
inode still exists on the server. The problem is that the lookup code
will call d_revalidate on the dentry that "." refers to, because NFS has
FS_REVAL_DOT set.

nfs_lookup_revalidate will see that the parent directory has changed and
will try to reverify the dentry by redoing a LOOKUP. That of course
fails, so the lookup code returns ESTALE.

The problem here is that d_revalidate is really a bad fit for this case.
What we really want to know at this point is whether the inode is still
good or not, but we don't really care what name it goes by or whether
the dcache is still valid.

Add a new d_op->d_weak_revalidate operation and have complete_walk call
that instead of d_revalidate. The intent there is to allow for a
"weaker" d_revalidate that just checks to see whether the inode is still
good. This is also gives us an opportunity to kill off the FS_REVAL_DOT
special casing.

[AV: changed method name, added note in porting, fixed confusion re
having it possibly called from RCU mode (it won't be)]

Cc: NeilBrown <neilb@suse.de>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      ecf3d1f1
    • A
      9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() · 3592ac44
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      3592ac44
    • A
      9p: split dropping the acls from v9fs_set_create_acl() · 5fa6300a
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      5fa6300a