Ensure that _nfs4_do_get_security_label() also initialises the
SEQUENCE call correctly, by having it call into nfs4_call_sync().
Reported-by: NJeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Chao reported the following oops when testing labeled NFS:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffffa0568703>] nfs4_xdr_enc_setattr+0x43/0x110 [nfsv4]
PGD 277bbd067 PUD 2777ea067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache sg coretemp kvm_intel kvm crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul iTCO_wdt glue_helper ablk_helper cryptd iTCO_vendor_support bnx2 pcspkr serio_raw i7core_edac cdc_ether microcode usbnet edac_core mii lpc_ich i2c_i801 mfd_core shpchp ioatdma dca acpi_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ata_generic ttm pata_acpi drm ata_piix libata megaraid_sas i2c_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 4 PID: 25657 Comm: chcon Not tainted 3.10.0-33.el7.x86_64 #1
Hardware name: IBM System x3550 M3 -[7944OEJ]-/90Y4784     , BIOS -[D6E150CUS-1.11]- 02/08/2011
task: ffff880178397220 ti: ffff8801595d2000 task.ti: ffff8801595d2000
RIP: 0010:[<ffffffffa0568703>]  [<ffffffffa0568703>] nfs4_xdr_enc_setattr+0x43/0x110 [nfsv4]
RSP: 0018:ffff8801595d3888  EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffff8801595d3b30 RCX: 0000000000000b4c
RDX: ffff8801595d3b30 RSI: ffff8801595d38e0 RDI: ffff880278b6ec00
RBP: ffff8801595d38c8 R08: ffff8801595d3b30 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801595d38e0
R13: ffff880277a4a780 R14: ffffffffa05686c0 R15: ffff8802765f206c
FS:  00007f2c68486800(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000027651a000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 0000000000000000 0000000000000000 0000000000000000 0000000000000000
 0000000000000000 ffff880277865800 ffff880278b6ec00 ffff880277a4a780
 ffff8801595d3948 ffffffffa02ad926 ffff8801595d3b30 ffff8802765f206c
Call Trace:
 [<ffffffffa02ad926>] rpcauth_wrap_req+0x86/0xd0 [sunrpc]
 [<ffffffffa02a1d40>] ? call_connect+0xb0/0xb0 [sunrpc]
 [<ffffffffa02a1d40>] ? call_connect+0xb0/0xb0 [sunrpc]
 [<ffffffffa02a1ecb>] call_transmit+0x18b/0x290 [sunrpc]
 [<ffffffffa02a1d40>] ? call_connect+0xb0/0xb0 [sunrpc]
 [<ffffffffa02aae14>] __rpc_execute+0x84/0x400 [sunrpc]
 [<ffffffffa02ac40e>] rpc_execute+0x5e/0xa0 [sunrpc]
 [<ffffffffa02a2ea0>] rpc_run_task+0x70/0x90 [sunrpc]
 [<ffffffffa02a2f03>] rpc_call_sync+0x43/0xa0 [sunrpc]
 [<ffffffffa055284d>] _nfs4_do_set_security_label+0x11d/0x170 [nfsv4]
 [<ffffffffa0558861>] nfs4_set_security_label.isra.69+0xf1/0x1d0 [nfsv4]
 [<ffffffff815fca8b>] ? avc_alloc_node+0x24/0x125
 [<ffffffff815fcd2f>] ? avc_compute_av+0x1a3/0x1b5
 [<ffffffffa055897b>] nfs4_xattr_set_nfs4_label+0x3b/0x50 [nfsv4]
 [<ffffffff811bc772>] generic_setxattr+0x62/0x80
 [<ffffffff811bcfc3>] __vfs_setxattr_noperm+0x63/0x1b0
 [<ffffffff811bd1c5>] vfs_setxattr+0xb5/0xc0
 [<ffffffff811bd2fe>] setxattr+0x12e/0x1c0
 [<ffffffff811a4d22>] ? final_putname+0x22/0x50
 [<ffffffff811a4f2b>] ? putname+0x2b/0x40
 [<ffffffff811aa1cf>] ? user_path_at_empty+0x5f/0x90
 [<ffffffff8119bc29>] ? __sb_start_write+0x49/0x100
 [<ffffffff811bd66f>] SyS_lsetxattr+0x8f/0xd0
 [<ffffffff8160cf99>] system_call_fastpath+0x16/0x1b
Code: 48 8b 02 48 c7 45 c0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 d0 00 00 00 00 48 c7 45 d8 00 00 00 00 48 c7 45 e0 00 00 00 00 <48> 8b 00 48 8b 00 48 85 c0 0f 84 ae 00 00 00 48 8b 80 b8 03 00
RIP  [<ffffffffa0568703>] nfs4_xdr_enc_setattr+0x43/0x110 [nfsv4]
 RSP <ffff8801595d3888>
CR2: 0000000000000000

The problem is that _nfs4_do_set_security_label calls rpc_call_sync()
directly which fails to do any setup of the SEQUENCE call. Have it use
nfs4_call_sync() instead which does the right thing. While we're at it
change the name of "args" to "arg" to better match the pattern in
_nfs4_do_setattr.
Reported-by: NChao Ye <cye@redhat.com>
Cc: David Quigley <dpquigl@davequigley.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch adds support for multiple security options which can be
specified using a colon-delimited list of security flavors (the same
syntax as nfsd's exports file).

This is useful, for instance, when NFSv4.x mounts cross SECINFO
boundaries. With this patch a user can use "sec=krb5i,krb5p"
to mount a remote filesystem using krb5i, but can still cross
into krb5p-only exports.

New mounts will try all security options before failing.  NFSv4.x
SECINFO results will be compared against the sec= flavors to
find the first flavor in both lists or if no match is found will
return -EPERM.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since the parsed sec= flavor is now stored in nfs_server->auth_info,
we no longer need an nfs_server flag to determine if a sec= option was
used.

This flag has not been completely removed because it is still needed for
the (old but still supported) non-text parsed mount options ABI
compatability.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Broadly speaking, v4.1 migration is untested.  There are no servers
in the wild that support NFSv4.1 migration.  However, as server
implementations become available, we do want to enable testing by
developers, while leaving it disabled for environments for which
broken migration support would be an unpleasant surprise.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

With NFSv4 minor version 0, the asynchronous lease RENEW
heartbeat can return NFS4ERR_LEASE_MOVED.  Error recovery logic for
async RENEW is a separate code path from the generic NFS proc paths,
so it must be updated to handle NFS4ERR_LEASE_MOVED as well.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently the Linux NFS client ignores the operation status code for
the RELEASE_LOCKOWNER operation.  Like NFSv3's UMNT operation,
RELEASE_LOCKOWNER is a courtesy to help servers manage their
resources, and the outcome is not consequential for the client.

During a migration, a server may report NFS4ERR_LEASE_MOVED, in
which case the client really should retry, since typically
LEASE_MOVED has nothing to do with the current operation, but does
prevent it from going forward.

Also, it's important for a client to respond as soon as possible to
a moved lease condition, since the client's lease could expire on
the destination without further action by the client.

NFS4ERR_DELAY is not included in the list of valid status codes for
RELEASE_LOCKOWNER in RFC 3530bis.  However, rfc3530-migration-update
does permit migration-capable servers to return DELAY to clients,
but only in the context of an ongoing migration.  In this case the
server has frozen lock state in preparation for migration, and a
client retry would help the destination server purge unneeded state
once migration recovery is complete.

Interestly, NFS4ERR_MOVED is not valid for RELEASE_LOCKOWNER, even
though lock owners can be migrated with Transparent State Migration.

Note that RFC 3530bis section 9.5 includes RELEASE_LOCKOWNER in the
list of operations that renew a client's lease on the server if they
succeed.  Now that our client pays attention to the operation's
status code, we can note that renewal appropriately.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Trigger lease-moved recovery when a request returns
NFS4ERR_LEASE_MOVED.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Introduce a mechanism for probing a server to determine if an FSID
is present or absent.

The on-the-wire compound is different between minor version 0 and 1.
Minor version 0 appends a RENEW operation to identify which client
ID is probing.  Minor version 1 has a SEQUENCE operation in the
compound which effectively carries the same information.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When a server returns NFS4ERR_MOVED during a delegation recall,
trigger the new migration recovery logic in the state manager.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When a server returns NFS4ERR_MOVED, trigger the new migration
recovery logic in the state manager.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I'm going to use this exit label also for migration recovery
failures.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nfs4_proc_fs_locations() function is invoked during referral
processing to perform a GETATTR(fs_locations) on an object's parent
directory in order to discover the target of the referral.  It
performs a LOOKUP in the compound, so the client needs to know the
parent's file handle a priori.

Unfortunately this function is not adequate for handling migration
recovery.  We need to probe fs_locations information on an FSID, but
there's no parent directory available for many operations that
can return NFS4ERR_MOVED.

Another subtlety: recovering from NFS4ERR_LEASE_MOVED is a process
of walking over a list of known FSIDs that reside on the server, and
probing whether they have migrated.  Once the server has detected
that the client has probed all migrated file systems, it stops
returning NFS4ERR_LEASE_MOVED.

A minor version zero server needs to know what client ID is
requesting fs_locations information so it can clear the flag that
forces it to continue returning NFS4ERR_LEASE_MOVED.  This flag is
set per client ID and per FSID.  However, the client ID is not an
argument of either the PUTFH or GETATTR operations.  Later minor
versions have client ID information embedded in the compound's
SEQUENCE operation.

Therefore, by convention, minor version zero clients send a RENEW
operation in the same compound as the GETATTR(fs_locations), since
RENEW's one argument is a clientid4.  This allows a minor version
zero server to identify correctly the client that is probing for a
migration.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The differences between minor version 0 and minor version 1
migration will be abstracted by the addition of a set of migration
recovery ops.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Cached opens have already been handled by _nfs4_opendata_reclaim_to_nfs4_state
and can safely skip being reprocessed, but must still call update_open_stateid
to make sure that all active fmodes are recovered.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Cc: stable@vger.kernel.org # 3.7.x: f494a607: NFSv4: fix NULL dereference
Cc: stable@vger.kernel.org # 3.7.x: a43ec98b: NFSv4: don't fail on missin
Cc: stable@vger.kernel.org # 3.7.x
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, if the call to nfs_refresh_inode fails, then we end up leaking
a reference count, due to the call to nfs4_get_open_state.
While we're at it, replace nfs4_get_open_state with a simple call to
atomic_inc(); there is no need to do a full lookup of the struct nfs_state
since it is passed as an argument in the struct nfs4_opendata, and
is already assigned to the variable 'state'.

Cc: stable@vger.kernel.org # 3.7.x: a43ec98b: NFSv4: don't fail on missing
Cc: stable@vger.kernel.org # 3.7.x
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is an unneeded check that could cause the client to fail to recover
opens.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

_nfs4_opendata_reclaim_to_nfs4_state doesn't expect to see a cached
open CLAIM_PREVIOUS, but this can happen. An example is when there are
RDWR openers and RDONLY openers on a delegation stateid. The recovery
path will first try an open CLAIM_PREVIOUS for the RDWR openers, this
marks the delegation as not needing RECLAIM anymore, so the open
CLAIM_PREVIOUS for the RDONLY openers will not actually send an rpc.

The NULL dereference is due to _nfs4_opendata_reclaim_to_nfs4_state
returning PTR_ERR(rpc_status) when !rpc_done. When the open is
cached, rpc_done == 0 and rpc_status == 0, thus
_nfs4_opendata_reclaim_to_nfs4_state returns NULL - this is unexpected
by callers of nfs4_opendata_to_nfs4_state().

This can be reproduced easily by opening the same file two times on an
NFSv4.0 mount with delegations enabled, once as RDWR and once as RDONLY then
sleeping for a long time.  While the files are held open, kick off state
recovery and this NULL dereference will be hit every time.

An example OOPS:

[   65.003602] BUG: unable to handle kernel NULL pointer dereference at 00000000
00000030
[   65.005312] IP: [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4]
[   65.006820] PGD 7b0ea067 PUD 791ff067 PMD 0
[   65.008075] Oops: 0000 [#1] SMP
[   65.008802] Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache
snd_ens1371 gameport nfsd snd_rawmidi snd_ac97_codec ac97_bus btusb snd_seq snd
_seq_device snd_pcm ppdev bluetooth auth_rpcgss coretemp snd_page_alloc crc32_pc
lmul crc32c_intel ghash_clmulni_intel microcode rfkill nfs_acl vmw_balloon serio
_raw snd_timer lockd parport_pc e1000 snd soundcore parport i2c_piix4 shpchp vmw
_vmci sunrpc ata_generic mperf pata_acpi mptspi vmwgfx ttm scsi_transport_spi dr
m mptscsih mptbase i2c_core
[   65.018684] CPU: 0 PID: 473 Comm: 192.168.10.85-m Not tainted 3.11.2-201.fc19
.x86_64 #1
[   65.020113] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 07/31/2013
[   65.022012] task: ffff88003707e320 ti: ffff88007b906000 task.ti: ffff88007b906000
[   65.023414] RIP: 0010:[<ffffffffa037d6ee>]  [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4]
[   65.025079] RSP: 0018:ffff88007b907d10  EFLAGS: 00010246
[   65.026042] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   65.027321] RDX: 0000000000000050 RSI: 0000000000000001 RDI: 0000000000000000
[   65.028691] RBP: ffff88007b907d38 R08: 0000000000016f60 R09: 0000000000000000
[   65.029990] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[   65.031295] R13: 0000000000000050 R14: 0000000000000000 R15: 0000000000000001
[   65.032527] FS:  0000000000000000(0000) GS:ffff88007f600000(0000) knlGS:0000000000000000
[   65.033981] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   65.035177] CR2: 0000000000000030 CR3: 000000007b27f000 CR4: 00000000000407f0
[   65.036568] Stack:
[   65.037011]  0000000000000000 0000000000000001 ffff88007b907d90 ffff88007a880220
[   65.038472]  ffff88007b768de8 ffff88007b907d48 ffffffffa037e4a5 ffff88007b907d80
[   65.039935]  ffffffffa036a6c8 ffff880037020e40 ffff88007a880000 ffff880037020e40
[   65.041468] Call Trace:
[   65.042050]  [<ffffffffa037e4a5>] nfs4_close_state+0x15/0x20 [nfsv4]
[   65.043209]  [<ffffffffa036a6c8>] nfs4_open_recover_helper+0x148/0x1f0 [nfsv4]
[   65.044529]  [<ffffffffa036a886>] nfs4_open_recover+0x116/0x150 [nfsv4]
[   65.045730]  [<ffffffffa036d98d>] nfs4_open_reclaim+0xad/0x150 [nfsv4]
[   65.046905]  [<ffffffffa037d979>] nfs4_do_reclaim+0x149/0x5f0 [nfsv4]
[   65.048071]  [<ffffffffa037e1dc>] nfs4_run_state_manager+0x3bc/0x670 [nfsv4]
[   65.049436]  [<ffffffffa037de20>] ? nfs4_do_reclaim+0x5f0/0x5f0 [nfsv4]
[   65.050686]  [<ffffffffa037de20>] ? nfs4_do_reclaim+0x5f0/0x5f0 [nfsv4]
[   65.051943]  [<ffffffff81088640>] kthread+0xc0/0xd0
[   65.052831]  [<ffffffff81088580>] ? insert_kthread_work+0x40/0x40
[   65.054697]  [<ffffffff8165686c>] ret_from_fork+0x7c/0xb0
[   65.056396]  [<ffffffff81088580>] ? insert_kthread_work+0x40/0x40
[   65.058208] Code: 5c 41 5d 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 89 d5 41 54 53 48 89 fb <4c> 8b 67 30 f0 41 ff 44 24 44 49 8d 7c 24 40 e8 0e 0a 2d e1 44
[   65.065225] RIP  [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4]
[   65.067175]  RSP <ffff88007b907d10>
[   65.068570] CR2: 0000000000000030
[   65.070098] ---[ end trace 0d1fe4f5c7dd6f8b ]---

Cc: <stable@vger.kernel.org> #3.7+
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The current caching model calls for the security label to be set on
first lookup and/or on any subsequent label changes. There is no
need to do it as part of an open reclaim.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In nfs4_proc_getlk(), when some error causes a retry of the call to
_nfs4_proc_getlk(), we can end up with Oopses of the form

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000134
 IP: [<ffffffff8165270e>] _raw_spin_lock+0xe/0x30
<snip>
 Call Trace:
  [<ffffffff812f287d>] _atomic_dec_and_lock+0x4d/0x70
  [<ffffffffa053c4f2>] nfs4_put_lock_state+0x32/0xb0 [nfsv4]
  [<ffffffffa053c585>] nfs4_fl_release_lock+0x15/0x20 [nfsv4]
  [<ffffffffa0522c06>] _nfs4_proc_getlk.isra.40+0x146/0x170 [nfsv4]
  [<ffffffffa052ad99>] nfs4_proc_lock+0x399/0x5a0 [nfsv4]

The problem is that we don't clear the request->fl_ops after the first
try and so when we retry, nfs4_set_lock_state() exits early without
setting the lock stateid.
Regression introduced by commit 70cc6487
(locks: make ->lock release private data before returning in GETLK case)
Reported-by: NWeston Andros Adamson <dros@netapp.com>
Reported-by: NJorge Mora <mora@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: <stable@vger.kernel.org> #2.6.22+

The previous patch introduces a compile warning by not assigning an initial
value to the "flavor" variable.  This could only be a problem if the server
returns a supported secflavor list of length zero, but it's better to
fix this before it's ever hit.
Signed-off-by: NAnna Schumaker <bjschuma@netapp.com>
Acked-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Call nfs4_lookup_root_sec for each flavor returned by SECINFO_NO_NAME until
one works.

One example of a situation this fixes:

 - server configured for krb5
 - server principal somehow gets deleted from KDC
 - server still thinking krb is good, sends krb5 as first entry in
    SECINFO_NO_NAME response
 - client tries krb5, but this fails without even sending an RPC because
    gssd's requests to the KDC can't find the server's principal
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Determine if we've created a new file by examining the directory change
attribute and/or the O_EXCL flag.

This fixes a regression when doing a non-exclusive create of a new file.
If the FILE_CREATED flag is not set, the atomic_open() command will
perform full file access permissions checks instead of just checking
for MAY_OPEN.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Recent SP4_MACH_CRED changes allows rpc_message.rpc_cred to change,
so keep a separate pointer to the machine cred for put_rpccred.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Request SP4_MACH_CRED WRITE and COMMIT support in spo_must_allow list --
they're already supported by the client.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 97431204 introduced a regression
that causes SECINFO_NO_NAME to fail without sending an RPC if:

 1) the nfs_client's rpc_client is using krb5i/p (now tried by default)
 2) the current user doesn't have valid kerberos credentials

This situation is quite common - as of now a sec=sys mount would use
krb5i for the nfs_client's rpc_client and a user would hardly be faulted
for not having run kinit.

The solution is to use the machine cred when trying to use an integrity
protected auth flavor for SECINFO_NO_NAME.

Older servers may not support using the machine cred or an integrity
protected auth flavor for SECINFO_NO_NAME in every circumstance, so we fall
back to using the user's cred and the filesystem's auth flavor in this case.

We run into another problem when running against linux nfs servers -
they return NFS4ERR_WRONGSEC when using integrity auth flavor (unless the
mount is also that flavor) even though that is not a valid error for
SECINFO*.  Even though it's against spec, handle WRONGSEC errors on
SECINFO_NO_NAME by falling back to using the user cred and the
filesystem's auth flavor.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that nfs4_proc_lookup_common respects the NFS_MOUNT_SECFLAVOUR
flag.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4 security auto-negotiation has been broken since
commit 4580a92d (NFS:
Use server-recommended security flavor by default (NFSv3))
because nfs4_try_mount() will automatically select AUTH_SYS
if it sees no auth flavours.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

WRITE and COMMIT can use the machine credential.

If WRITE is supported and COMMIT is not, make all (mach cred) writes FILE_SYNC4.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

TEST_STATEID and FREE_STATEID can use the machine credential.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

SECINFO and SECINFO_NONAME can use the machine credential.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

CLOSE and LOCKU can use the machine credential.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is a minimal client side implementation of SP4_MACH_CRED.  It will
attempt to negotiate SP4_MACH_CRED iff the EXCHANGE_ID is using
krb5i or krb5p auth.  SP4_MACH_CRED will be used if the server supports the
minimal operations:

 BIND_CONN_TO_SESSION
 EXCHANGE_ID
 CREATE_SESSION
 DESTROY_SESSION
 DESTROY_CLIENTID

This patch only includes the EXCHANGE_ID negotiation code because
the client will already use the machine cred for these operations.

If the server doesn't support SP4_MACH_CRED or doesn't support the minimal
operations, the exchange id will be resent with SP4_NONE.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Rename the new 'recover_locks' kernel parameter to 'recover_lost_locks'
and change the default to 'false'. Document why in
Documentation/kernel-parameters.txt

Move the 'recover_lost_locks' kernel parameter to fs/nfs/super.c to
make it easy to backport to kernels prior to 3.6.x, which don't have
a separate NFSv4 module.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When an NFSv4 client loses contact with the server it can lose any
locks that it holds.

Currently when it reconnects to the server it simply tries to reclaim
those locks.  This might succeed even though some other client has
held and released a lock in the mean time.  So the first client might
think the file is unchanged, but it isn't.  This isn't good.

If, when recovery happens, the locks cannot be claimed because some
other client still holds the lock, then we get a message in the kernel
logs, but the client can still write.  So two clients can both think
they have a lock and can both write at the same time.  This is equally
not good.

There was a patch a while ago
  http://comments.gmane.org/gmane.linux.nfs/41917

which tried to address some of this, but it didn't seem to go
anywhere.  That patch would also send a signal to the process.  That
might be useful but for now this patch just causes writes to fail.

For NFSv4 (unlike v2/v3) there is a strong link between the lock and
the write request so we can fairly easily fail any IO of the lock is
gone.  While some applications might not expect this, it is still
safer than allowing the write to succeed.

Because this is a fairly big change in behaviour a module parameter,
"recover_locks", is introduced which defaults to true (the current
behaviour) but can be set to "false" to tell the client not to try to
recover things that were lost.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure OPEN_CONFIRM is not emitted while the transport is plugged.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure RELEASE_LOCKOWNER is not emitted while the transport is
plugged.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When CONFIG_NFS_V4_1 is disabled, the calls to nfs4_setup_sequence()
and nfs4_sequence_done() are compiled out for the DELEGRETURN
operation.  To allow NFSv4.0 transport blocking to work for
DELEGRETURN, these call sites have to be present all the time.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>