This allows arch code could decide the way to reserve the ibft.

And we should reserve ibft as early as possible, instead of BOOTMEM
stage, in case the table is in RAM range and is not reserved by BIOS
(this will often be the case.)

Move to just after find_smp_config().

Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymore.

-v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk <konrad@darnok.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4BB510FB.80601@kernel.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Jones <pjones@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
CC: Jan Beulich <jbeulich@novell.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or
in a more compact fashion.

Example:

 Allocated new RAMDISK: 00ec2000 - 0248ce57
 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56

The new RAMDISK's end is not page aligned.
Last page could be shared with other users.

When free_init_pages are called for initrd or .init, the page
could be freed and we could corrupt other data.

code segment in free_init_pages():

 |        for (; addr < end; addr += PAGE_SIZE) {
 |                ClearPageReserved(virt_to_page(addr));
 |                init_page_count(virt_to_page(addr));
 |                memset((void *)(addr & ~(PAGE_SIZE-1)),
 |                        POISON_FREE_INITMEM, PAGE_SIZE);
 |                free_page(addr);
 |                totalram_pages++;
 |        }

last half page could be used as one whole free page.

So page align the boundaries.

-v2: make the original initramdisk to be aligned, according to
     Johannes, otherwise we have the chance to lose one page.
     we still need to keep initrd_end not aligned, otherwise it could
     confuse decompressor.
-v3: change to WARN_ON instead, suggested by Johannes.
-v4: use PAGE_ALIGN, suggested by Johannes.
     We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN
     Add comments about assuming ramdisk start is aligned
     in relocate_initrd(), change to re get ramdisk_image instead of save it
     to make diff smaller. Add warning for wrong range, suggested by Johannes.
-v6: remove one WARN()
     We need to align beginning in free_init_pages()
     do not copy more than ramdisk_size, noticed by Johannes
Reported-by: NStanislaw Gruszka <sgruszka@redhat.com>
Tested-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This will save 64K bytes from memory when loading linux if DMI is
disabled, which is good for embedded systems.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
LKML-Reference: <1265758732-19320-1-git-send-email-cascardo@holoscopio.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Finally we can use early_res to replace bootmem for x86_64 now.

Still can use CONFIG_NO_BOOTMEM to enable it or not.

-v2: fix 32bit compiling about MAX_DMA32_PFN
-v3: folded bug fix from LKML message below
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B747239.4070907@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

64bit NUMA already make enough space under 4G with new early_node_mem.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-16-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Simplify setup_node_mem: don't use bootmem from other node, instead
just find_e820_area in early_node_mem.

This keeps the boundary between early_res and boot mem more clear, and
lets us only call early_res_to_bootmem() one time instead of for all
nodes.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-12-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

In preparation for moving to the generic page_is_ram(), make explicit
what we expect to be reserved and not reserved.
Tested-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <20100122033004.335813103@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Commit 6aa542a6 added a quirk for the
Intel DG45ID board due to low memory corruption. The Intel DG45FC
shares the same BIOS (and the same bug) as noted in:

  http://bugzilla.kernel.org/show_bug.cgi?id=13736Signed-off-by: NDavid Härdeman <david@hardeman.nu>
LKML-Reference: <20100128200254.GA9134@hardeman.nu>
Cc: <stable@kernel.org>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Cc: ykzhao <yakui.zhao@intel.com>
Cc: Tony Bones <aabonesml@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Jens found the following crash/regression:

[    0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page

and

[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE

and bisected it to b24c2a92 ("x86: Move find_smp_config()
earlier and avoid bootmem usage").

It turns out the BIOS is using the first 64k for mptable,
without reserving it.

So try to find good range for the real-mode trampoline instead of
hard coding it, in case some bios tries to use that range for sth.
Reported-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Tested-by: NJens Axboe <jens.axboe@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4B21630A.6000308@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

copy_edd() should be __init.
warning msg:
WARNING: vmlinux.o(.text+0x7759): Section mismatch in reference from the
function copy_edd() to the variable .init.data:boot_params
The function copy_edd() references
the variable __initdata boot_params.
This is often because copy_edd lacks a __initdata
annotation or the annotation of boot_params is wrong.
Signed-off-by: NZhenwenXu <helight.xu@gmail.com>
LKML-Reference: <4B139F8F.4000907@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Move the find_smp_config() call to before bootmem is initialized.
Use reserve_early() instead of reserve_bootmem() in it.

This simplifies the code, we only need to call find_smp_config()
once and can remove the now unneeded reserve parameter from
x86_init_mpparse::find_smp_config.

We thus also reduce x86's dependency on bootmem allocations.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B0BB9F2.70907@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use find_e820_area()/reserve_early() instead.

-v2: address Eric's request, to restore original semantics.
     will fail, if the provided address can not be used.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <4B09E2F9.7040403@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is possible for x86_64 systems to lack the NX bit either due to the
hardware lacking support or the BIOS having turned off the CPU capability,
so NX status should be reported.  Additionally, anyone booting NX-capable
CPUs in 32bit mode without PAE will lack NX functionality, so this change
provides feedback for that case as well.
Signed-off-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1258154897-6770-6-git-send-email-hpa@zytor.com>

The 32- and 64-bit code used very different mechanisms for enabling
NX, but even the 32-bit code was enabling NX in head_32.S if it is
available.  Furthermore, we had a bewildering collection of tests for
the available of NX.

This patch:

a) merges the 32-bit set_nx() and the 64-bit check_efer() function
   into a single x86_configure_nx() function.  EFER control is left
   to the head code.

b) eliminates the nx_enabled variable entirely.  Things that need to
   test for NX enablement can verify __supported_pte_mask directly,
   and cpu_has_nx gives the supported status of NX.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Chris Wright <chrisw@sous-sol.org>
LKML-Reference: <1258154897-6770-5-git-send-email-hpa@zytor.com>
Acked-by: NKees Cook <kees.cook@canonical.com>

Instead of using bootmem, try find_e820_area()/reserve_early(),
and call acpi_reserve_memory() early, to allocate the wakeup
trampoline code area below 1M.

This is more reliable, and it also removes a dependency on
bootmem.

-v2: change function name to acpi_reserve_wakeup_memory(),
     as suggested by Rafael.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: pm list <linux-pm@lists.linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AFA210B.3020207@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On platforms where the BIOS handles the thermal monitor interrupt,
APIC_LVTTHMR on each logical CPU is programmed to generate a SMI
and OS must not touch it.

Unfortunately AP bringup sequence using INIT-SIPI-SIPI clears all
the LVT entries except the mask bit. Essentially this results in
all LVT entries including the thermal monitoring interrupt set
to masked (clearing the bios programmed value for APIC_LVTTHMR).

And this leads to kernel take over the thermal monitoring
interrupt on AP's but not on BSP (leaving the bios programmed
value only on BSP).

As a result of this, we have seen system hangs when the thermal
monitoring interrupt is generated.

Fix this by reading the initial value of thermal LVT entry on
BSP and if bios has taken over the control, then program the
same value on all AP's and leave the thermal monitoring
interrupt control on all the logical cpu's to the bios.
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
Reviewed-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091110013824.GA24940@ywang-moblin2.bj.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: stable@kernel.org

We have a board with a Phoenix/MSC BIOS which also corrupts the low
64KB of RAM, so add an entry to the table.
Signed-off-by: NSimon Kagstrom <simon.kagstrom@netinsight.net>
LKML-Reference: <20091106154404.002648d9@marrow.netinsight.se>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This is the counterpart to "x86: export k8 physical topology" for
SRAT. It is not as invasive because the acpi code already seperates
node setup into detection and registration steps, with the
exception of registering e820 active regions in
acpi_numa_memory_affinity_init().  This is now moved to
acpi_scan_nodes() if NUMA emulation is disabled or deferred.

acpi_numa_init() now returns a value which specifies whether an
underlying SRAT was located.  If so, that topology can be used by
the emulation code to interleave emulated nodes over physical nodes
or to register the nodes for ACPI.

acpi_get_nodes() may now be used to export the srat physical
topology of the machine for NUMA emulation.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518580.14754@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To eventually interleave emulated nodes over physical nodes, we
need to know the physical topology of the machine without actually
registering it.  This does the k8 node setup in two parts:
detection and registration.  NUMA emulation can then used the
physical topology detected to setup the address ranges of emulated
nodes accordingly.  If emulation isn't used, the k8 nodes are
registered as normal.

Two formals are added to the x86 NUMA setup functions: `acpi' and
`k8'. These represent whether ACPI or K8 NUMA has been detected;
both cannot be true at the same time.  This specifies to the NUMA
emulation code whether an underlying physical NUMA topology exists
and which interface to use.

This patch deals solely with separating the k8 setup path into
Northbridge detection and registration steps and leaves the ACPI
changes for a subsequent patch.  The `acpi' formal is added here,
however, to avoid touching all the header files again in the next
patch.

This approach also ensures emulated nodes will not span physical
nodes so the true memory latency is not misrepresented.

k8_get_nodes() may now be used to export the k8 physical topology
of the machine for NUMA emulation.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After close looking, commit 8126dec3 will break:

 1. some cpu feature  in early stage too, like cpu_has_x2apic
 2. will break built-in-command line
 3. will break other memmap= and mem=
 4. early_dbgp and early_console that will use early_ioremap to access mmio (?)

So revert it.

Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>,
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML-Reference: <4AB51DFD.2000904@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move tboot.h from asm to linux to fix the build errors of intel_txt
patch on non-X86 platforms. Remove the tboot code from generic code
init/main.c and kernel/cpu.c.
Signed-off-by: NShane Wang <shane.wang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

boot_cpu_physical_apicid is a global variable and used as function
argument as well. Rename the function arguments to avoid confusion.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

TSC calibration is modified by the vmware hypervisor and paravirt by
separate means. Moorestown wants to add its own calibration routine as
well. So make calibrate_tsc a proper x86_init_ops function and
override it by paravirt or by the early setup of the vmware
hypervisor.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The timer init code is convoluted with several quirks and the paravirt
timer chooser. Figuring out which code path is actually taken is not
for the faint hearted.

Move the numaq TSC quirk to tsc_pre_init x86_init_ops function and
replace the paravirt time chooser and the remaining x86 quirk with a
simple x86_init_ops function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We really do not need two paravirt/x86_init_ops functions which are
called in two consecutive source lines. Move the only user of
post_allocator_init into the already existing pagetable_setup_done
function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Replace more paravirt hackery by proper x86_init_ops.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Replace another obscure paravirt magic and move it to
x86_init_ops. Such a hook is also useful for embedded and special
hardware.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

ARCH_SETUP is a horrible leftover from the old arch/i386 mach support
code. It still has a lonely user in xen. Move it to x86_init_ops.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Replace the quirks by a simple x86_init_ops function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

irq_init is overridden by x86_quirks and by paravirts. Unify the whole
mess and make it an unconditional x86_init_ops function which defaults
to the standard function and can be overridden by the early platform
code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Replace the quirk machinery by a x86_init_ops function which defaults
to the standard implementation.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Since parse_early_param() may (e.g. for earlyprintk=dbgp)
involve calls to page table manipulation functions (here
set_fixmap_nocache()), NX hardware support must be determined
before calling that function (so that __supported_pte_mask gets
properly set up).

But the call after parse_early_param() can also not go away, as
that will honor eventual command line specified disabling of
the NX functionality.

( This will then just result in whatever mappings got
  established during parse_early_param() having the NX bit set
  despite it being disabled on the command line, but I think
  that's tolerable).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4A97F3BD02000078000121B9@vpn.id2.novell.com>
[ merged to x86/pat to resolve a conflict. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/sfi.c serves the dual-purpose of supporting the
SFI core with arch specific code, as well as a home for the
arch-specific code that uses SFI.

analogous to ACPI, drivers/sfi/Kconfig is pulled in by arch/x86/Kconfig
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: x86@kernel.org

The 32bit and the 64bit code are slighty different in the reservation
of standard resources. Also the upcoming Moorestown support needs its
own version of that.

Add it to x86_init_ops and initialize it with the 64bit default. 32bit
overrides it in early boot. Now moorestown can add it's own override
w/o sprinkling the code with more #ifdefs
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

probe_roms is only used on 32bit. Add it to the x86_init ops and
remove the #ifdefs.

Default initializer is x86_init_noop() which is overridden in
the 32bit boot code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The system will die if the kernel is booted with "reservetop"
parameter, in present code, parse "reservetop" parameter after
early_ioremap_init(), and some function still use
early_ioremap() after it.

The problem is, "reservetop" parameter can modify
'FIXADDR_TOP', then the virtual address got by early_ioremap()
is base on old 'FIXADDR_TOP', but the page mapping is base on
new 'FIXADDR_TOP', it will occur page fault, and the IDT is not
prepare yet, so, the system is dead.

So, put parse_early_param() in the front of
early_ioremap_init() in this patch.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: yinghai@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A8D402F.4080805@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds kernel configuration and boot support for Intel Trusted
Execution Technology (Intel TXT).

Intel's technology for safer computing, Intel Trusted Execution
Technology (Intel TXT), defines platform-level enhancements that
provide the building blocks for creating trusted platforms.

Intel TXT was formerly known by the code name LaGrande Technology (LT).

Intel TXT in Brief:
o  Provides dynamic root of trust for measurement (DRTM)
o  Data protection in case of improper shutdown
o  Measurement and verification of launched environment

Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems.  It is currently available on desktop systems based on
the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP
dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45
Express chipsets.

For more information, see http://www.intel.com/technology/security/.
This site also has a link to the Intel TXT MLE Developers Manual, which
has been updated for the new released platforms.

A much more complete description of how these patches support TXT, how to
configure a system for it, etc. is in the Documentation/intel_txt.txt file
in this patch.

This patch provides the TXT support routines for complete functionality,
documentation for TXT support and for the changes to the boot_params structure,
and boot detection of a TXT launch.  Attempts to shutdown (reboot, Sx) the system
will result in platform resets; subsequent patches will support these shutdown modes
properly.

 Documentation/intel_txt.txt      |  210 +++++++++++++++++++++
 Documentation/x86/zero-page.txt  |    1
 arch/x86/include/asm/bootparam.h |    3
 arch/x86/include/asm/fixmap.h    |    3
 arch/x86/include/asm/tboot.h     |  197 ++++++++++++++++++++
 arch/x86/kernel/Makefile         |    1
 arch/x86/kernel/setup.c          |    4
 arch/x86/kernel/tboot.c          |  379 +++++++++++++++++++++++++++++++++++++++
 security/Kconfig                 |   30 +++
 9 files changed, 827 insertions(+), 1 deletion(-)
Signed-off-by: NJoseph Cihula <joseph.cihula@intel.com>
Signed-off-by: NShane Wang <shane.wang@intel.com>
Signed-off-by: NGang Wei <gang.wei@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

AMI BIOS with low memory corruption was found on Intel DG45ID
board (Bug 13710). Add this board to the blacklist - in the
(somewhat optimistic) hope of future boards/BIOSes from Intel
not having this bug.

Also see:

  http://bugzilla.kernel.org/show_bug.cgi?id=13736Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net>
Cc: ykzhao <yakui.zhao@intel.com>
Cc: alan@lxorguk.ukuu.org.uk
Cc: <stable@kernel.org>
LKML-Reference: <1247660169-4503-1-git-send-email-bug-track@fisher-privat.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The init_gbpages() function is conditionally called from
init_memory_mapping() function. There are two call-sites where
this 'after_bootmem' condition can be true: setup_arch() and
mem_init() via pci_iommu_alloc().

Therefore, it's safe to move the call to init_gbpages() to
setup_arch() as it's always called before mem_init().

This removes an after_bootmem use - paving the way to remove
all uses of that state variable.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <Pine.LNX.4.64.0906221731210.19474@melkki.cs.Helsinki.FI>
Signed-off-by: NIngo Molnar <mingo@elte.hu>