- 13 7月, 2015 12 次提交
-
-
由 Greg Ungerer 提交于
The ColdFire M5475 on the m5475evb board supports a PCI bus, lets enable it for the defconfig to get better build and test coverage. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The inb/outb/... family of IO methods end up being multiply defined when building PCI support for the ColdFire. Compiling gives this: CC init/main.o In file included from ./arch/m68k/include/asm/io.h:4:0, from include/linux/bio.h:30, from include/linux/blkdev.h:18, from init/main.c:75: ./arch/m68k/include/asm/io_mm.h:420:0: warning: "inb" redefined ./arch/m68k/include/asm/io_mm.h:108:0: note: this is the location of the previous definition ... The ColdFire/PCI case defines its own IO access methods, so no others should be defined or used in this case. Conditionally disable other definitions that clash with it. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
No change to active configuration settings, updated to match current Kconfigs only. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
It would be nice if we could support multiple ColdFire SoC types in a single binary - but currently the code simply does not support it. Change the SoC selection config options to be a choice instead of individual selectable entries. This fixes problems with building allnoconfig, and means that a sane linux kernel is generated for a single ColdFire SoC type. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
Create some intelligent default settings for each ColdFire SoC type in the configuration entry for CONFIG_CLOCK_FREQ. The ColdFire clock frequency is configurable at build time. There is a lot of variation in the frequency of operation on specific ColdFire based boards. But we can choose a default that matches the maximum frequency of clock operation for a particular ColdFire part. That is typically the most common clock setting. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
It is possible to disable the clock selection at configuration time, but for ColdFire targets we always expect a clock frequency to be selected. This results in the following compile time error: CC arch/m68k/kernel/asm-offsets.s In file included from ./arch/m68k/include/asm/timex.h:14:0, from include/linux/timex.h:65, from include/linux/sched.h:19, from arch/m68k/kernel/asm-offsets.c:14: ./arch/m68k/include/asm/coldfire.h:25:2: error: #error "Don't know what your ColdFire CPU clock frequency is??" Remove CONFIG_CLOCK_SELECT completely and always enable CONFIG_CLOCK_FREQ for ColdFire. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 25 6月, 2015 2 次提交
-
-
由 Thomas Gleixner 提交于
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Joshua Thompson <funaho@jurai.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org
-
由 Laurent Dufour 提交于
CRIU is recreating the process memory layout by remapping the checkpointee memory area on top of the current process (criu). This includes remapping the vDSO to the place it has at checkpoint time. However some architectures like powerpc are keeping a reference to the vDSO base address to build the signal return stack frame by calling the vDSO sigreturn service. So once the vDSO has been moved, this reference is no more valid and the signal frame built later are not usable. This patch serie is introducing a new mm hook framework, and a new arch_remap hook which is called when mremap is done and the mm lock still hold. The next patch is adding the vDSO remap and unmap tracking to the powerpc architecture. This patch (of 3): This patch introduces a new set of header file to manage mm hooks: - per architecture empty header file (arch/x/include/asm/mm-arch-hooks.h) - a generic header (include/linux/mm-arch-hooks.h) The architecture which need to overwrite a hook as to redefine it in its header file, while architecture which doesn't need have nothing to do. The default hooks are defined in the generic header and are used in the case the architecture is not defining it. In a next step, mm hooks defined in include/asm-generic/mm_hooks.h should be moved here. Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: NAndrew Morton <akpm@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 6月, 2015 1 次提交
-
-
由 Joe Perches 提交于
Format mac addresses with the normal kernel extension. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 07 6月, 2015 2 次提交
-
-
由 Toshi Kani 提交于
Replace all calls to ioremap_writethrough() with ioremap_wt(). Remove ioremap_writethrough() too. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-10-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Toshi Kani 提交于
Add ioremap_wt() to all arch-specific asm/io.h headers which define ioremap_wc() locally. These headers do not include <asm-generic/iomap.h>. Some of them include <asm-generic/io.h>, but ioremap_wt() is defined for consistency since they define all ioremap_xxx locally. In all architectures without Write-Through support, ioremap_wt() is defined indentical to ioremap_nocache(). frv and m68k already have ioremap_writethrough(). On those we add ioremap_wt() indetical to ioremap_writethrough() and defines ARCH_HAS_IOREMAP_WT in both architectures. The ioremap_wt() interface is exported to drivers. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-9-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 01 6月, 2015 2 次提交
-
-
由 Akinobu Mita 提交于
This replaces the plain loop over the sglist array with for_each_sg() macro which consists of sg_next() function calls. Since m68k doesn't select ARCH_HAS_SG_CHAIN, it is not necessary to use for_each_sg() in order to loop over each sg element. But this can help find problems with drivers that do not properly initialize their sg tables when CONFIG_DEBUG_SG is enabled. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Cc: linux-arch@vger.kernel.org Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 19 5月, 2015 3 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 David Hildenbrand 提交于
Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Frederic Weisbecker 提交于
preempt_mask.h defines all the preempt_count semantics and related symbols: preempt, softirq, hardirq, nmi, preempt active, need resched, etc... preempt.h defines the accessors and mutators of preempt_count. But there is a messy dependency game around those two header files: * preempt_mask.h includes preempt.h in order to access preempt_count() * preempt_mask.h defines all preempt_count semantic and symbols except PREEMPT_NEED_RESCHED that is needed by asm/preempt.h Thus we need to define it from preempt.h, right before including asm/preempt.h, instead of defining it to preempt_mask.h with the other preempt_count symbols. Therefore the preempt_count semantics happen to be spread out. * We plan to introduce preempt_active_[enter,exit]() to consolidate preempt_schedule*() code. But we'll need to access both preempt_count mutators (preempt_count_add()) and preempt_count symbols (PREEMPT_ACTIVE, PREEMPT_OFFSET). The usual place to define preempt operations is in preempt.h but then we'll need symbols in preempt_mask.h which already includes preempt.h. So we end up with a ressource circle dependency. Lets merge preempt_mask.h into preempt.h to solve these dependency issues. This way we gather semantic symbols and operation definition of preempt_count in a single file. This is a dumb copy-paste merge. Further merge re-arrangments are performed in a subsequent patch to ease review. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431441711-29753-2-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 5月, 2015 1 次提交
-
-
由 Thomas Gleixner 提交于
We removed the only user of this define in the rtmutex code. Get rid of it. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
-
- 07 5月, 2015 1 次提交
-
-
由 Valentin Rothberg 提交于
Remove CONFIG_SERIAL_DETECT_IRQ and CONFIG_SERIAL_MANY_PORTS, and substitute all references to the proper 8250 Kconfig options. Now, the actual Kconfig dependencies are not hidden when reading the code and static analyzers are less confused. Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 4月, 2015 1 次提交
-
-
由 Kirill A. Shutemov 提交于
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 4月, 2015 1 次提交
-
-
由 Richard Weinberger 提交于
As execution domain support is gone we can remove signal translation from the signal code and remove exec_domain from thread_info. Signed-off-by: NRichard Weinberger <richard@nod.at>
-
- 30 3月, 2015 4 次提交
-
-
由 Finn Thain 提交于
Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
Building for the ColdFire 5271 produces the following warning: arch/m68k/coldfire/m527x.c: In function ‘m527x_fec_init’: arch/m68k/coldfire/m527x.c:95:6: warning: unused variable ‘par’ Fix it by moving the definition of par inside the 5271 conditional code. Reported-by: Nertheb <3rth3bnospam@ethe.fr> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The inclusion of multiple FEC ethernet platform devices is based around the FEC address definitions in the platform headers. The ColdFire m527x platform is defining 2 FEC modules, but the 5271 SoC only has a single FEC hardware module. The attempt to probe and init a second FEC module causes a trap and dump on boot on this platform. Fix the definitions so that only the 5275 SoC platform (which has 2 FEC hardware modules) defines the second base address. Reported-by: Nertheb <3rth3bnospam@ethe.fr> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Yannick Guerrini 提交于
Change 'Reaceive' to 'Receive' Change 'alighnment' to 'alignment' Signed-off-by: NYannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 15 3月, 2015 4 次提交
-
-
由 Dan Carpenter 提交于
pr_err() has a KERN_ERR built in. Smatch complains about these nowadays. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
All other Ethernet drivers are builtin, for NFS root. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
We have a central copy of the GPL for that, and the FSF may change address again in the future. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 13 3月, 2015 1 次提交
-
-
由 Yijing Wang 提交于
Previously, pci_scan_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_bus() and do it after any resource assignment in the callers. [bhelgaas: changelog, check for failure in mcf_pci_init()] Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> CC: "David S. Miller" <davem@davemloft.net> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Guan Xuetao <gxt@mprc.pku.edu.cn> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com>
-
- 01 3月, 2015 1 次提交
-
-
由 Kirill A. Shutemov 提交于
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Usually, these defines are provided by <asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>. But some architectures fold page table levels in a custom way. They need to define these macros themself. This patch adds missing defines. The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc() and __pud_alloc() on architectures without these page table levels. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2015 1 次提交
-
-
由 Andy Lutomirski 提交于
If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: NRichard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2015 1 次提交
-
-
由 Kirill A. Shutemov 提交于
LKP has triggered a compiler warning after my recent patch "mm: account pmd page tables to the process": mm/mmap.c: In function 'exit_mmap': >> mm/mmap.c:2857:2: warning: right shift count >= width of type [enabled by default] The code: > 2857 WARN_ON(mm_nr_pmds(mm) > 2858 round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT); In this, on tile, we have FIRST_USER_ADDRESS defined as 0. round_up() has the same type -- int. PUD_SHIFT. I think the best way to fix it is to define FIRST_USER_ADDRESS as unsigned long. On every arch for consistency. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2015 1 次提交
-
-
由 Kirill A. Shutemov 提交于
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 2月, 2015 1 次提交
-
-
由 Rickard Strandqvist 提交于
Remove the function BSP_set_clock_mmss() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-