- 06 10月, 2012 1 次提交
-
-
由 Bharat Bhushan 提交于
This patch adds the watchdog emulation in KVM. The watchdog emulation is enabled by KVM_ENABLE_CAP(KVM_CAP_PPC_BOOKE_WATCHDOG) ioctl. The kernel timer are used for watchdog emulation and emulates h/w watchdog state machine. On watchdog timer expiry, it exit to QEMU if TCR.WRC is non ZERO. QEMU can reset/shutdown etc depending upon how it is configured. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> [bharat.bhushan@freescale.com: reworked patch] Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> [agraf: adjust to new request framework] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 23 9月, 2012 1 次提交
-
-
由 Alex Williamson 提交于
To emulate level triggered interrupts, add a resample option to KVM_IRQFD. When specified, a new resamplefd is provided that notifies the user when the irqchip has been resampled by the VM. This may, for instance, indicate an EOI. Also in this mode, posting of an interrupt through an irqfd only asserts the interrupt. On resampling, the interrupt is automatically de-asserted prior to user notification. This enables level triggered interrupts to be posted and re-enabled from vfio with no userspace intervention. All resampling irqfds can make use of a single irq source ID, so we reserve a new one for this interface. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 18 9月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
vcpu mutex can be held for unlimited time so taking it with mutex_lock on an ioctl is wrong: one process could be passed a vcpu fd and call this ioctl on the vcpu used by another process, it will then be unkillable until the owner exits. Call mutex_lock_killable instead and return status. Note: mutex_lock_interruptible would be even nicer, but I am not sure all users are prepared to handle EINTR from these ioctls. They might misinterpret it as an error. Cleanup paths expect a vcpu that can't be used by any userspace so this will always succeed - catch bugs by calling BUG_ON. Catch callers that don't check return state by adding __must_check. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 06 9月, 2012 1 次提交
-
-
由 Marcelo Tosatti 提交于
Introducing kvm_arch_flush_shadow_memslot, to invalidate the translations of a single memory slot. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 28 8月, 2012 1 次提交
-
-
由 Gavin Shan 提交于
The build error was caused by that builtin functions are calling the functions implemented in modules. This error was introduced by commit 4d8b81ab ("KVM: introduce readonly memslot"). The patch fixes the build error by moving function __gfn_to_hva_memslot() from kvm_main.c to kvm_host.h and making that "inline" so that the builtin function (kvmppc_h_enter) can use that. Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 22 8月, 2012 6 次提交
-
-
由 Xiao Guangrong 提交于
In current code, if we map a readonly memory space from host to guest and the page is not currently mapped in the host, we will get a fault pfn and async is not allowed, then the vm will crash We introduce readonly memory region to map ROM/ROMD to the guest, read access is happy for readonly memslot, write access on readonly memslot will cause KVM_EXIT_MMIO exit Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
In the later patch, it indicates failure when we try to get a writable hva from the readonly memslot Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Then, remove bad_hva and inline kvm_is_error_hva Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
In the later patch, it indicates failure when we try to get a writable pfn from the readonly memslot Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
It can instead of hva_to_pfn_atomic Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Quote Avi's comment: | KVM_MEMSLOT_INVALID is actually an internal symbol, not used by | userspace. Please move it to kvm_host.h. Also, we divide the memlsot->flags into two parts, the lower 16 bits are visible for userspace, the higher 16 bits are internally used in kvm Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 06 8月, 2012 9 次提交
-
-
由 Xiao Guangrong 提交于
Currently, we use the error code as error pfn to indicat the error condition, it is not straightforward and it will not work on PAE 32-bit cpu with huge memory, since the valid physical address can be at most 52 bits For the normal pfn, the highest 12 bits should be zero, so we can mask these bits to indicate the error. Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
After commit a2766325, the error page is replaced by the error code, it need not be released anymore [ The patch has been compiling tested for powerpc ] Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
It is used to eliminate the overload of function call and cleanup the code Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Remove it since it is not used anymore Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
These functions are exported and can not inline, move them to kvm_host.h to eliminate the overload of function call Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Then, remove get_bad_pfn Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Then, get_hwpoison_pfn and is_hwpoison_pfn can be removed Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
After that, the exported and un-inline function, get_fault_pfn, can be removed Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
Two reasons: - x86 can integrate rmap and rmap_pde and remove heuristics in __gfn_to_rmap(). - Some architectures do not need rmap. Since rmap is one of the most memory consuming stuff in KVM, ppc'd better restrict the allocation to Book3S HV. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 26 7月, 2012 2 次提交
-
-
由 Christoffer Dall 提交于
Handle KVM_IRQ_LINE and KVM_IRQ_LINE_STATUS in the generic kvm_vm_ioctl() function and call into kvm_vm_ioctl_irq_line(). This is even more relevant when KVM/ARM also uses this ioctl. Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Currently, kvm allocates some pages and use them as error indicators, it wastes memory and is not good for scalability Base on Avi's suggestion, we use the error codes instead of these pages to indicate the error conditions Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 23 7月, 2012 2 次提交
-
-
由 Raghavendra K T 提交于
Currently, on a large vcpu guests, there is a high probability of yielding to the same vcpu who had recently done a pause-loop exit or cpu relax intercepted. Such a yield can lead to the vcpu spinning again and hence degrade the performance. The patchset keeps track of the pause loop exit/cpu relax interception and gives chance to a vcpu which: (a) Has not done pause loop exit or cpu relax intercepted at all (probably he is preempted lock-holder) (b) Was skipped in last iteration because it did pause loop exit or cpu relax intercepted, and probably has become eligible now (next eligible lock holder) Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Reviewed-by: NRik van Riel <riel@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # on s390x Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Raghavendra K T 提交于
Noting pause loop exited vcpu or cpu relax intercepted helps in filtering right candidate to yield. Wrong selection of vcpu; i.e., a vcpu that just did a pl-exit or cpu relax intercepted may contribute to performance degradation. Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Reviewed-by: NRik van Riel <riel@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # on s390x Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 7月, 2012 4 次提交
-
-
由 Xiao Guangrong 提交于
The parameter, 'kvm', is not used in gfn_to_pfn_memslot, we can happily remove it Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Remove them since they are not used anymore Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
bad_pfn is not used out of kvm_main.c, so mark it static, also move it near hwpoison_pfn and fault_pfn Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Using get_fault_pfn to cleanup the code Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 19 7月, 2012 1 次提交
-
-
由 Takuya Yoshikawa 提交于
This restricts hva handling in mmu code and makes it easier to extend kvm_handle_hva() so that it can treat a range of addresses later in this patch series. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Cc: Alexander Graf <agraf@suse.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 04 7月, 2012 1 次提交
-
-
由 Marc Zyngier 提交于
In order to avoid compilation failure when KVM is not compiled in, guard the mmu_notifier specific sections with both CONFIG_MMU_NOTIFIER and KVM_ARCH_WANT_MMU_NOTIFIER, like it is being done in the rest of the KVM code. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 03 7月, 2012 1 次提交
-
-
由 Alex Williamson 提交于
Prune this down to just the struct kvm_irqfd so we can avoid changing function definition for every flag or field we use. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 18 6月, 2012 1 次提交
-
-
由 Marc Zyngier 提交于
The KVM code sometimes uses CONFIG_HAVE_KVM_IRQCHIP to protect code that is related to IRQ routing, which not all in-kernel irqchips may support. Use KVM_CAP_IRQ_ROUTING instead. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 06 6月, 2012 1 次提交
-
-
由 Christoffer Dall 提交于
Introduces a couple of print functions, which are essentially wrappers around standard printk functions, with a KVM: prefix. Functions introduced or modified are: - kvm_err(fmt, ...) - kvm_info(fmt, ...) - kvm_debug(fmt, ...) - kvm_pr_unimpl(fmt, ...) - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...) Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 05 6月, 2012 1 次提交
-
-
由 Takuya Yoshikawa 提交于
lpage_info is created for each large level even when the memory slot is not for RAM. This means that when we add one slot for a PCI device, we end up allocating at least KVM_NR_PAGE_SIZES - 1 pages by vmalloc(). To make things worse, there is an increasing number of devices which would result in more pages being wasted this way. This patch mitigates this problem by using kvm_kvzalloc(). Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 17 5月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
Using RCU for lockless shadow walking can increase the amount of memory in use by the system, since RCU grace periods are unpredictable. We also have an unconditional write to a shared variable (reader_counter), which isn't good for scaling. Replace that with a scheme similar to x86's get_user_pages_fast(): disable interrupts during lockless shadow walk to force the freer (kvm_mmu_commit_zap_page()) to wait for the TLB flush IPI to find the processor with interrupts enabled. We also add a new vcpu->mode, READING_SHADOW_PAGE_TABLES, to prevent kvm_flush_remote_tlbs() from avoiding the IPI. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 01 5月, 2012 1 次提交
-
-
由 Konstantin Weitz 提交于
This patch implements the directed yield hypercall found on other System z hypervisors. It delegates execution time to the virtual cpu specified in the instruction's parameter. Useful to avoid long spinlock waits in the guest. Christian Borntraeger: moved common code in virt/kvm/ Signed-off-by: NKonstantin Weitz <WEITZKON@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 24 4月, 2012 1 次提交
-
-
由 Jan Kiszka 提交于
Currently, MSI messages can only be injected to in-kernel irqchips by defining a corresponding IRQ route for each message. This is not only unhandy if the MSI messages are generated "on the fly" by user space, IRQ routes are a limited resource that user space has to manage carefully. By providing a direct injection path, we can both avoid using up limited resources and simplify the necessary steps for user land. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 4月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
MMIO that are split across a page boundary are currently broken - the code does not expect to be aborted by the exit to userspace for the first MMIO fragment. This patch fixes the problem by generalizing the current code for handling 16-byte MMIOs to handle a number of "fragments", and changes the MMIO code to create those fragments. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 12 4月, 2012 1 次提交
-
-
由 Alex Williamson 提交于
We've been adding new mappings, but not destroying old mappings. This can lead to a page leak as pages are pinned using get_user_pages, but only unpinned with put_page if they still exist in the memslots list on vm shutdown. A memslot that is destroyed while an iommu domain is enabled for the guest will therefore result in an elevated page reference count that is never cleared. Additionally, without this fix, the iommu is only programmed with the first translation for a gpa. This can result in peer-to-peer errors if a mapping is destroyed and replaced by a new mapping at the same gpa as the iommu will still be pointing to the original, pinned memory address. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 08 4月, 2012 1 次提交
-
-
由 Takuya Yoshikawa 提交于
Now that we do neither double buffering nor heuristic selection of the write protection method these are not needed anymore. Note: some drivers have their own implementation of set_bit_le() and making it generic needs a bit of work; so we use test_and_set_bit_le() and will later replace it with generic set_bit_le(). Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-