This shoud fix the problem with SysRq mode staying half-way enabled
and interfereing with normal PrtScrn operation after user presses ALT
for the first time.
Reported-and-tested-by: NÉric Piel <E.A.B.Piel@tudelft.nl>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kasprintf combines kmalloc and sprintf, and takes care of the size
calculation itself.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression a,flag;
expression list args;
statement S;
@@

  a =
-  \(kmalloc\|kzalloc\)(...,flag)
+  kasprintf(flag,args)
  <... when != a
  if (a == NULL || ...) S
  ...>
- sprintf(a,args);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ramoops, like mtdoops, can log oops/panic information but in RAM.  It can
be used with persistent RAM for systems without flash support.  In
addition, for this systems, with this driver, it's no more needed add to
the kernel the mtd subsystem with advantage in footprint.

It can be used in a very easy way with persistent RAM for systems without
flash support.  For these systems, with this driver, it is no longer
required to cinlude mtd subsystem with an advantage in footprint.  In
addition, you can save flash space and store this information only in RAM.
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Cc: Simon Kagstrom <simon.kagstrom@netinsight.net>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc; Anders Grafstrom <anders.grafstrom@netinsight.net>
Cc: Yuasa Yoichi <yuasa@linux-mips.org>
Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If run_to_completion flag is set, it means that we are running in a
single-threaded mode, and thus no locks are held.

This fixes a deadlock when IPMI notifier is being called during panic.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NCorey Minyard <minyard@acm.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update core IPMI driver printk()'s with dev_printk(), and its constructs,
to provide additional device topology information.

An example of the additional device topology for a PNP device -
  ipmi_si 00:02: probing via ACPI
  ipmi_si 00:02: [io  0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
  ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, ...
  ipmi_si 00:02: IPMI kcs interface initialized

and for a PCI device -
  ipmi_si 0000:01:04.6: probing via PCI
  ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spaci...
  ipmi_si 0000:01:04.6: IPMI kcs interface initialized

[minyard@acm.org: rework to fix rejects, extended it a bit]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMyron Stowe <myron.stowe@hp.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert PNP patch (git 9e368fa0) to
maintain a pointer to a PNP device, 'pnp_dev', instead of the ACPI device,
'acpi_dev', that is currently being tracked with PNP based IPMI device
discovery.
Signed-off-by: NMyron Stowe <myron.stowe@hp.com>
Acked-by: NZhao Yakui <yakui.zhao@intel.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The timeouts in IPMI are in the 1-5 second range in message handling, so a
1 second timeout is a reasonable thing to do.  This should help with
reducing power consumption on idle systems.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some odd systems may have multiple BMCs, and we want to be able to support
them.  Let's make the assumption that if a system legitimately has
multiple BMCs then each BMC's SI will be of the same type, and also that
we won't see multiple SIs of the same type unless we have multiple BMCs.
If these hold true then we should register all SIs of the same type.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can reasonably alter the poll rate depending on whether we're
performing a transaction or merely waiting for an event.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we're not currently in the middle of a transaction, and if we have
interrupts, there's no real reason to poll the controller more frequently
than the core IPMI code does.  Set the interrupt_disabled flag
appropriately as the interrupt state changes, and make the timeout code
reset itself only if the transaction is incomplete or we have no
interrupts.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ipmi spec provides an ordering for si discovery.  Change the driver to
match, with the exception of preferring smbios to SPMI as HPs (at least)
contain accurate information in the former but not the latter.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only register one si per bmc.  Use any user-provided devices first,
followed by the first device with an irq, followed by the first device
discovered.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ipmi spec indicates that we should only make use of one si per bmc, so
separate device discovery and registration to make that possible.

[thenzl@redhat.com: fix mutex use]
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch from a char* to an enum to identify the address source of SIs,
making it easier to handle them appropriately during registration.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Stanse found pci reference leaks in uli_agp_init and nforce3_agp_init
initialization functions.

The PCI devices are bridges, so it's not critical, but still worth fixing.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

For misc devices, inode->i_cdev doesn't point to the device drivers own
data.  Link between file operations and device driver internal data is
lost.  Pass pointer to misc device struct via file private data for driver
open function use.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Handle out-of-range indices before reading what they refer to.  And don't
access the one-past-the-end element of the array either.
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Roel Kluin <roel.kluin@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/char/hangcheck-timer.c is doubly broken.  When the overflown value
of TIMER_FREQ is abnormally low, it spams the syslog with KERN_CRIT
messages "Hangcheck: hangcheck value past margin!" But whether it happens
or not depends on HZ and lpj in a complex way.  People have hit it
occasionally as far as google search can tell.

First, the following line overflows unsigned long:

# define TIMER_FREQ (HZ*loops_per_jiffy)

Second, and more importantly, loops_per_jiffy has little to do with the
con= version from the the time scale of get_cycles() (aka rdtsc) to the
time scale of jiffies.

The attached patch resolves both of the problems.
Acked-by: NJoel Becker <joel.becker@oracle.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

.name, .match_table and .owner are duplicated in both of_platform_driver
and device_driver.  This patch is a removes the extra copies from struct
of_platform_driver and converts all users to the device_driver members.

This patch is a pretty mechanical change.  The usage model doesn't change
and if any drivers have been missed, or if anything has been fixed up
incorrectly, then it will fail with a compile time error, and the fixup
will be trivial.  This patch looks big and scary because it touches so
many files, but it should be pretty safe.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NSean MacLennan <smaclennan@pikatech.com>

REMOTE_DEBUG does already appear in 2.2 kernel sources but didn't
appear as a config Option in the initial git import 2.6.12-rc. It's
currently just used in one single place of the linux kernel and should
probably be dropped totally
Signed-off-by: NChristoph Egger <siccegge@cs.fau.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes it return -ENODEV if we run out of empty slots in the
probe function.  It's unlikely to happen, but it makes the static
checkers happy.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Comment was not updated when tty_insert_flip_string was generalised.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

n_gsm uses skb functions, so it should depend on NET.

n_gsm.c:(.text+0x123d49): undefined reference to `skb_dequeue'
n_gsm.c:(.text+0x123d98): undefined reference to `kfree_skb'
n_gsm.c:(.text+0x123e1e): undefined reference to `skb_pull'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add an implementation of GSM 0710 MUX. The implementation currently supports

- Basic and advanced framing (as either end of the link)
- UI or UIH data frames
- Adaption layer 1-4 (1 and 2 via tty, 3 and 4 as skbuff lists)
- Modem and control messages including the correct retry process
- Flow control

and exposes the MUX channels as a set of virtual tty devices including modem
signals. This is an experimental driver.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the clock support to the Nomadik RNG driver
Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: NLinus walleij <linus.walleij@stericsson.com>
Acked-by: NAlessandro Rubini <rubini@unipv.it>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than dynamically allocate 10 bytes, move it to static allocation.
This saves space and avoids the need for error checking.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In each case, the first argument to send_control_msg or __send_control_msg,
respectively, has either not been successfully allocated or has been freed
at the point of the call.  In the first case, the first argument, port, is
only used to access the portdev and id fields, in order to call
__send_control_msg.  Thus it seems possible instead to call
__send_control_msg directly.  In the second case, the call to
__send_control_msg is moved up to a place where it seems like the first
argument, portdev, has been initialized sufficiently to make the call to
__send_control_msg meaningful.

This has only been compile tested.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@free@
expression E;
position p;
@@
kfree@p(E)

@@
expression free.E, subE<=free.E, E1;
position free.p;
@@

  kfree@p(E)
  ...
(
  subE = E1
|
* E
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The VIRTIO_CONSOLE_RESIZE control message sent to us by the host now
contains the new {rows, cols} values for the console. This ensures each
console port gets its own size, and we don't depend on the config-space
rows and cols values at all now.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: linuxppc-dev@ozlabs.org
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

With support for multiple consoles, just using one {rows,cols} pair in
the config space is not going to suffice.

Store each console's size as part of the console struct.

This changes the behaviour for one case when multiport is not enabled:
when notifier_add_vio() is called, the console size is taken from that
of the last config-space update instead of fetching it afresh from the
config space.

Also add a helper to update the size in the console struct as we'll need
to use the same code to update the size via control messages when
multiport support is enabled.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: linuxppc-dev@ozlabs.org
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

When using multiport, we'll use control messages. Ensure we don't
accidentally update port 0 size on config interrupts.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: linuxppc-dev@ozlabs.org
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If the host port is not open, a write() should either just return if the
file is opened in non-blocking mode, or block till the host port is
opened.

Also, don't spin till host consumes data for nonblocking ports. For
non-blocking ports, we can do away with the spinning and reclaim the
buffers consumed by the host on the next write call or on the condition
that'll make poll return.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We'll introduce a function that checks if write will block.  Have
function names that are similar for the two cases.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If we're using multiport, there's no point in always creating a console
port. Create the console port only if the host doesn't support
multiport.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Instead of the host and guest independently enumerating ports, switch to
a control message to add ports where the host supplies the port number
so there's no ambiguity or a possibility of a race between the host and
the guest port numbers.

We now no longer need the 'nr_ports' config value. Since no kernel has
been released with the MULTIPORT changes yet, we have a chance to fiddle
with the config space without adding compatibility features.

This is beneficial for management software, which would now be able to
instantiate ports at known locations and avoid problems that arise with
implicit numbering in the host and the guest. This removes the 'guessing
game' part of it, and management software can now actually indicate
which id to spawn a particular port on.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We're going to use add_port() from handle_control_message() in the next
patch.

Move the add_port() and fill_queue(), which depends on it, above
handle_control_message() to avoid forward declarations.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We're going to switch to using control messages for port hot-plug and
initial port discovery. Remove the config work handler which handled
port hot-plug so far.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>