- 03 10月, 2006 32 次提交
-
-
由 Carl-Daniel Hailfinger 提交于
This patch adds suspend/resume support for the graphics chip in the Acer Aspire 2010: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 01:00.0 0300: 1002:4e50 (prog-if 00 [VGA]) Subsystem: 1025:0061 Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 16 Memory at a8000000 (32-bit, prefetchable) [size=128M] I/O ports at c100 [size=256] Memory at e0010000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at a0000000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 Signed-off-by: NCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@mgx.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Benjamin A. Okopnik" <ben@linuxgazette.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
- Remove 24/32bit unused support (the chips don't do 24/32bit anyway) - Clean up printk obfuscation - Clean up lispitus in the if(())()) stuff - Minor tidying No functionality changes, may have a crack at hardware scrolling based on my X driver once the cleanups are in. Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This patch makes three needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Raphael Assenat 提交于
This patch fixes a bug where we obtain a smaller resolution than requested. (eg: in 640x480, only 639x479 usable pixels). This was due to 1 being substracted from the xres and yres vars two times: first in mbxfb.c and then in the macros from reg_bits.h. This patch removes the minus ones from the mbxfb.c file. Tested and works. Signed-off-by: NRaphael Assenat <raph@8d.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Raphael Assenat 提交于
This is a workaround for what I think is a bug in the 2700G chip. The PLL output frequency is adustable using 3 values (M, N and P. See code for formula). The N value range is documented to be 1 to 7 but when it is set to 1, the output frequency is lower than it should be (divided by 2), giving unexpected results such as no sync on a CRT display. This patch prevents N=1 when searching for the best value for the requested pixclock. Signed-off-by: NRaphael Assenat <raph@8d.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
- make the following needlessly global function static: - mach64_ct.c: aty_st_pll_ct() - proper prototypes for the following functions: - atyfb_base.c: atyfb_copyarea() - atyfb_base.c: atyfb_fillrect() - atyfb_base.c: atyfb_imageblit() Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Check the return value of pci_enable_device(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Check the return value of pci_enable_device(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Check the return value of pci_register_driver() Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Check return value of pci_register_driver(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Remove the cursor timer (cursor flashing) on the following conditions: - if vc is in KD_GRAPHICS mode, ie, when X owns the console - if vc is blanked This misbehavior was exposed by Dave Jones. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Jones 提交于
Every time the console cursor blinks, we do a kmalloc/kfree pair. This patch turns that into a single allocation. This allocation was the most frequent kmalloc I saw on my test box. [adaplas] Per Alan's suggestion, move global variables to fbcon's private structure. This would also avoid resource leaks when fbcon is unloaded. Signed-off-by: NDave Jones <davej@redhat.com> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dennis Munsie 提交于
Uses the generic ddc read functionality in fbmon.c instead of the previous functionality. Signed-off-by: NDennis Munsie <dmunsie@cecropia.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Update driver to use generic DDC reading [khali@linux-fr.org: fix oops in i2c handling] Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Jurriaan <thunder7@xs4all.nl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Update driver to use generic DDC reading Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Update driver to use generic DDC reading Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Update driver to use generic DDC reading Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dennis Munsie 提交于
Adds functionality to read the EDID information over the DDC bus in a generic way. This code is based on the DDC implementation in the radeon driver. [adaplas] - separate from fbmon.c and place in new file fb_ddc.c - remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature will not compile if i2c support is compiled as a module - feature is selectable only by drivers needing it. It must have a 'select FB_DDC if xxx' in Kconfig - change printk's to dev_*, the i2c people prefers it Signed-off-by: NDennis Munsie <dmunsie@cecropia.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Frysinger 提交于
The Kconfig help text doesnt mention that in order to load the vfb module, you have to pass in the parameter vfb_enable=1 Document required module options in Kconfig for loading the vfb module. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Guido Guenther 提交于
use (MIN/MAX)_LEVEL and FB_(UN)BLANK instead of the values they are defined to Signed-off-by: NGuido Guenther <agx@sigxcpu.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rodolfo Giometti 提交于
- add cursor enable/disable, very useful if you wish a full screen boot logo. Cursor can be disabled from kernel command line: video=au1100fb:nocursor,panel:Toppoly_TD035STED4 or from sysfs interface: echo 1 > /sys/module/au1100fb/parameters/nocursor - fix up some wrong indentation issues. Signed-off-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 9月, 2006 1 次提交
-
-
由 Richard Purdie 提交于
Convert LOMOMO to use struct device * for GPIOs instead of struct locomo_dev. This enables access to the GPIOs from code which is not a locomo device itself (such as audio). Access for gpio 31 is removed for error handling (no such hardware exists). Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 9月, 2006 7 次提交
-
-
由 Andriy Skulysh 提交于
Trivial build fix. Signed-off-by: NAndriy Skulysh <askulysh@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
With the store queue API rework, we need to change the in-kernel users too. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Andriy Skulysh 提交于
suspend/resume support for hitfb, as well as some other minor cleanups. Signed-off-by: NAndriy Skulysh <askulysh@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We don't support this on SH, so just disable it.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Andriy Skulysh 提交于
Some minor cleanups for the updated consolidated hp6xx mach-type. Signed-off-by: NAndriy Skulysh <askulysh@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Jean Delvare 提交于
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
i2c-matroxfb: Struct init conversion Convert the struct i2c_algo_bit_data initialization to proper C99 style. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NPetr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-