Numbering the 8 potential digits 2 though 9 never did make a lot of sense.
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If you're going to have a conditional branch after each 32x32->64-bit
multiply, might as well shrink the code and make it a loop.

This also avoids using the long multiply for small integers.

(This leaves the comments in a confusing state, but that's a separate
patch to make review easier.)
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Rabin Vincent <rabin@rab.in>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The same multiply-by-inverse technique can be used to convert division by
10000 to a 32x32->64-bit multiply.
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Shrink the reciprocal approximations used in put_dec_full4() based on the
comments in put_dec_full9().
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the const sections for the code generated by crc32 table.  There's
no ro version of the cacheline aligned section, so we cannot put in
const data without a conflict Just don't make the crc tables const for
now.

[ak@linux.intel.com: some fixes and new description]
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NJoe Mario <jmario@redhat.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When racing with CPU hotplug, percpu_counter_sum() can return negative
values for the number of observed events.

This confuses fprop_new_period(), which uses unsigned type and as a
result number of events is set to big *positive* number.  From that
moment on, things go pear shaped and can result e.g.  in division by
zero as denominator is later truncated to 32-bits.

This bug causes a divide-by-zero oops in bdi_dirty_limit() in Borislav's
3.6.0-rc6 based kernel.

Fix the issue by using a signed type in fprop_new_period().  That makes
us bail out from the function without doing anything (mistakenly)
thinking there are no events to age.  That makes aging somewhat
inaccurate but getting accurate data would be rather hard.
Signed-off-by: NJan Kara <jack@suse.cz>
Reported-by: NBorislav Petkov <bp@amd64.org>
Reported-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There have been some recent bugs that were triggered only when
preemptible RCU's __rcu_read_unlock() was preempted just after setting
->rcu_read_lock_nesting to INT_MIN, which is a low-probability event.
Therefore, reproducing those bugs (to say nothing of gaining confidence
in alleged fixes) was quite difficult.  This commit therefore creates
a new debug-only RCU kernel config option that forces a short delay
in __rcu_read_unlock() to increase the probability of those sorts of
bugs occurring.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Convert direct calls of vprintk_emit and printk_emit to the
dev_ equivalents.

Make create_syslog_header static.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NJim Cromie <jim.cromie@gmail.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

netdev_printk originally called dev_printk with %pV.

This style emitted the complete dev_printk header with
a colon followed by the netdev_name prefix followed
by a colon.

Now that netdev_printk does not call dev_printk, the
extra colon is superfluous.  Remove it.

Example:
old: sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
new: sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NJim Cromie <jim.cromie@gmail.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A lot of stack is used in recursive printks with %pV.

Using multiple levels of %pV (a logging function with %pV
that calls another logging function with %pV) can consume
more stack than necessary.

Avoid excessive stack use by not calling dev_printk from
netdev_printk and dynamic_netdev_dbg.  Duplicate the logic
and form of dev_printk instead.

Make __netdev_printk static.
Remove EXPORT_SYMBOL(__netdev_printk)
Whitespace and brace style neatening.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NJim Cromie <jim.cromie@gmail.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4e00daa
("driver-core: extend dev_printk() to pass structured data")
changed __dev_printk and broke dynamic-debug's ability to control the
dynamic prefix of dev_dbg(dev,..).

commit af7f2158
("drivers-core: make structured logging play nice with dynamic-debug")
made a minimal correction.

The current dynamic debug code uses up to 3 recursion levels via %pV.
This can consume quite a bit of stack.  Directly call printk_emit to
reduce the recursion depth.

These changes include:

dev_dbg:
o Create and use function create_syslog_header to format the syslog
  header for printk_emit uses.
o Call create_syslog_header and neaten __dev_printk
o Make __dev_printk static not global
o Remove include header declaration of __dev_printk
o Remove now unused EXPORT_SYMBOL() of __dev_printk
o Whitespace neatening

dynamic_dev_dbg:
o Remove KERN_DEBUG from dynamic_emit_prefix
o Call create_syslog_header and printk_emit
o Whitespace neatening
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NJim Cromie <jim.cromie@gmail.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds Makefile and Kconfig files required for building an
AArch64 kernel.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

When pkcs_1_v1_5_decode_emsa() returns without error and hash sizes do
not match, hash comparision is not done and digsig_verify_rsa() returns
no error.  This is a bug and this patch fixes it.

The bug was introduced in v3.3 by commit b35e286a ("lib/digsig:
pkcs_1_v1_5_decode_emsa cleanup").

Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel's version number is used as decimal in the bcdDevice field of
the RH descriptor. For kernel version v3.12 we would see 3.0c in lsusb.
I am not sure how important it is to stick with bcd values since this is
this way since we started git history and nobody complained (however back
then we reported only 2.6).
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).

Suggested by David S. Miller.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace netlink_set_nonroot by one new field `flags' in
struct netlink_kernel_cfg that is passed to netlink_kernel_create.

This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since
now the flags field in nl_table is generic (so we can add more
flags if needed in the future).

Also adjust all callers in the net-next tree to use these flags
instead of netlink_set_nonroot.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables the caller to initialize swiotlb with its own iotlb
memory late in the bootup.

See git commit eb605a57
"swiotlb: add swiotlb_tbl_map_single library function" which will
explain the full details of what it can be used for.

CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
[v1: Fold in smatch warning]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

... making percpu_counter_destroy() non-blocking
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We are seeing a lot of sg_alloc_table allocation failures using the new
drm prime infrastructure.  We isolated the cause to code in
__sg_alloc_table that was re-writing the gfp_flags.

There is a comment in the code that suggest that there is an assumption
about the allocation coming from a memory pool.  This was likely true
when sg lists were primarily used for disk I/O.
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Olof Johansson <olofj@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This provides the ability to inject artifical errors to pSeries reconfig
notifier chain callbacks.  It is controlled through debugfs interface
under /sys/kernel/debug/notifier-error-inject/pSeries-reconfig

If the notifier call chain should be failed with some events
notified, write the error code to "actions/<notifier event>/error".
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This provides the ability to inject artifical errors to memory hotplug
notifier chain callbacks.  It is controlled through debugfs interface
under /sys/kernel/debug/notifier-error-inject/memory

If the notifier call chain should be failed with some events notified,
write the error code to "actions/<notifier event>/error".

Example: Inject memory hotplug offline error (-12 == -ENOMEM)

	# cd /sys/kernel/debug/notifier-error-inject/memory
	# echo -12 > actions/MEM_GOING_OFFLINE/error
	# echo offline > /sys/devices/system/memory/memoryXXX/state
	bash: echo: write error: Cannot allocate memory
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This provides the ability to inject artifical errors to PM notifier chain
callbacks.  It is controlled through debugfs interface under
/sys/kernel/debug/notifier-error-inject/pm

Each of the files in "error" directory represents an event which can be
failed and contains the error code.  If the notifier call chain should be
failed with some events notified, write the error code to the files.

If the notifier call chain should be failed with some events notified,
write the error code to "actions/<notifier event>/error".

Example: Inject PM suspend error (-12 = -ENOMEM)

	# cd /sys/kernel/debug/notifier-error-inject/pm
	# echo -12 > actions/PM_SUSPEND_PREPARE/error
	# echo mem > /sys/power/state
	bash: echo: write error: Cannot allocate memory
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rewrite existing cpu-notifier-error-inject module to use debugfs based new
framework.

This change removes cpu_up_prepare_error and cpu_down_prepare_error module
parameters which were used to specify error code to be injected.  We could
keep these module parameters for backward compatibility by module_param_cb
but it seems overkill for this module.

This provides the ability to inject artifical errors to CPU notifier chain
callbacks.  It is controlled through debugfs interface under
/sys/kernel/debug/notifier-error-inject/cpu

If the notifier call chain should be failed with some events notified,
write the error code to "actions/<notifier event>/error".

Example1: inject CPU offline error (-1 == -EPERM)

	# cd /sys/kernel/debug/notifier-error-inject/cpu
	# echo -1 > actions/CPU_DOWN_PREPARE/error
	# echo 0 > /sys/devices/system/cpu/cpu1/online
	bash: echo: write error: Operation not permitted

Example2: inject CPU online error (-2 == -ENOENT)

	# cd /sys/kernel/debug/notifier-error-inject/cpu
	# echo -2 > actions/CPU_UP_PREPARE/error
	# echo 1 > /sys/devices/system/cpu/cpu1/online
	bash: echo: write error: No such file or directory
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset provides kernel modules that can be used to test the error
handling of notifier call chain failures by injecting artifical errors to
the following notifier chain callbacks.

 * CPU notifier
 * PM notifier
 * memory hotplug notifier
 * powerpc pSeries reconfig notifier

Example: Inject CPU offline error (-1 == -EPERM)

  # cd /sys/kernel/debug/notifier-error-inject/cpu
  # echo -1 > actions/CPU_DOWN_PREPARE/error
  # echo 0 > /sys/devices/system/cpu/cpu1/online
  bash: echo: write error: Operation not permitted

The patchset also adds cpu and memory hotplug tests to
tools/testing/selftests These tests first do simple online and offline
test and then do fault injection tests if notifier error injection
module is available.

This patch:

The notifier error injection provides the ability to inject artifical
errors to specified notifier chain callbacks.  It is useful to test the
error handling of notifier call chain failures.

This adds common basic functions to define which type of events can be
fail and to initialize the debugfs interface to control what error code
should be returned and which event should be failed.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variables t4, t5, t6 and t7 are only used when CRC_LE_BITS != 32.  Fix
the following compilation warnings:

  lib/crc32.c: In function 'crc32_body':
  lib/crc32.c:77:55: warning: unused variable 't7'
  lib/crc32.c:77:41: warning: unused variable 't6'
  lib/crc32.c:77:27: warning: unused variable 't5'
  lib/crc32.c:77:13: warning: unused variable 't4'
Signed-off-by: NThiago Rafael Becker <trbecker@trbecker.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If there are two spinlocks embedded in a structure that kallsyms knows
about and one of the spinlocks locks up we will print the name of the
containing structure instead of the address of the lock.  This is quite
bad, so let's use %pS instead of %ps so we get an offset in addition to
the symbol so we can determine which particular lock is having problems.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead
of the multitude of #if defined() checks in atomic64_test.c
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memweight() is the function that counts the total number of bits set in
memory area.  Unlike bitmap_weight(), memweight() takes pointer and size
in bytes to specify a memory area which does not need to be aligned to
long-word boundary.

[akpm@linux-foundation.org: rename `w' to `ret']
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Anders Larsen <al@alarsen.net>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Tony Luck <tony.luck@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are many places in the kernel where the drivers print small buffers
as a hex string.  This patch adds a support of the variable width buffer
to print it as a hex string with a delimiter.  The idea came from Pavel
Roskin here: http://www.digipedia.pl/usenet/thread/18835/17449/

Sample output of
	pr_info("buf[%d:%d] %*phC\n", from, len, len, &buf[from]);
could be look like this:
	[ 0.726130] buf[51:8] e8:16:b6:ef:e3:74:45:6e
	[ 0.750736] buf[59:15] 31:81:b8:3f:35:49:06:ae:df:32:06:05:4a:af:55
	[ 0.757602] buf[17:5] ac:16:d5:2c:ef
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using ALT+SysRq+Q all the pointers are replaced with "pK-error" like
this:

	[23153.208033]   .base:               pK-error

with echo h > /proc/sysrq-trigger it works:

	[23107.776363]   .base:       ffff88023e60d540

The intent behind this behavior was to return "pK-error" in cases where
the %pK format specifier was used in interrupt context, because the
CAP_SYSLOG check wouldn't be meaningful.  Clearly this should only apply
when kptr_restrict is actually enabled though.
Reported-by: NStevie Trujillo <stevie.trujillo@gmail.com>
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bluetooth uses mostly LE byte order which is reversed for visual
interpretation.  Currently in Bluetooth in use unsafe batostr function.

This is a slightly modified version of Joe's patch (sent Sat, Dec 4,
2010).
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a new constructor for an sg table. The table is constructed
from an array of struct pages. All contiguous chunks of the pages are merged
into a single sg nodes. A user may provide an offset and a size of a buffer if
the buffer is not page-aligned.

The function is dedicated for DMABUF exporters which often perform conversion
from an page array to a scatterlist. Moreover the scatterlist should be
squashed in order to save memory and to speed-up the process of DMA mapping
using dma_map_sg.

The code is based on the patch 'v4l: vb2-dma-contig: add support for
scatterlist in userptr mode' and hints from Laurent Pinchart.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
CC: Andrew Morton <akpm@linux-foundation.org>

libfdt is part of the device tree support in scripts/dtc/libfdt.  For
some platforms that use the Device Tree, we want to be able to edit
the flattened device tree form.

We don't want to burden kernel builds that do not require it, so we
gate compilation of libfdt files with CONFIG_LIBFDT.  So if it is
needed, you need to do this in your Kconfig:

	select LIBFDT

And in the Makefile of the code using libfdt something like:

ccflags-y := -I$(src)/../../../scripts/dtc/libfdt
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-kernel@vger.kernel.org
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The stack_not_used() function in <linux/sched.h> assumes that stacks
grow downwards. This is not true on IA64 or PARISC, so this function
would walk off in the wrong direction and into the weeds.

Found on IA64 because of a compilation failure with recursive dependencies
on IA64_TASKSIZE and IA64_THREAD_INFO_SIZE.

Fixing the code is possible, but should be combined with other
infrastructure additions to set up the "canary" at the end of the stack.

Reported-by: Fengguang Wu <fengguang.wu@intel.com> (failed allmodconfig build)
Signed-off-by: NTony Luck <tony.luck@intel.com>

Although the C language allows you to break strings across lines, doing
this makes it hard for people to find the Linux kernel code corresponding
to a given console message.  This commit therefore fixes broken strings
throughout RCU's source code.
Suggested-by: NJosh Triplett <josh@joshtriplett.org>
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Even though it has "bool" in the name, you have pass a u32 pointer to
debugfs_create_bool().  Otherwise you get memory corruption in
write_file_bool().  Fortunately in this case the corruption happens in
an alignment hole between variables so it doesn't cause any problems.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch adds the following structure:

struct netlink_kernel_cfg {
        unsigned int    groups;
        void            (*input)(struct sk_buff *skb);
        struct mutex    *cb_mutex;
};

That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.

I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.

That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.

This patch also adapts all callers to use this new interface.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>