Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 10 10月, 2007 5 次提交
    • T
      NFS: Fix over-conservative attribute invalidation in nfs_update_inode() · f2115dc9
      由 Trond Myklebust 提交于 
      We should always be declaring the attribute cache as valid after having
updated it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      f2115dc9
    • T
      NFS: Replace file->private_data with calls to nfs_file_open_context() · cd3758e3
      由 Trond Myklebust 提交于 
      Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      cd3758e3
    • F
      Re: [NFS] [PATCH] Attribute timeout handling and wrapping u32 jiffies · c7e15961
      由 Fabio Olive Leite 提交于 
      I would like to discuss the idea that the current checks for attribute
timeout using time_after are inadequate for 32bit architectures, since
time_after works correctly only when the two timestamps being compared
are within 2^31 jiffies of each other. The signed overflow caused by
comparing values more than 2^31 jiffies apart will flip the result,
causing incorrect assumptions of validity.

2^31 jiffies is a fairly large period of time (~25 days) when compared
to the lifetime of most kernel data structures, but for long lived NFS
mounts that can sit idle for months (think that for some reason autofs
cannot be used), it is easy to compare inode attribute timestamps with
very disparate or even bogus values (as in when jiffies have wrapped
many times, where the comparison doesn't even make sense).

Currently the code tests for attribute timeout by simply adding the
desired amount of jiffies to the stored timestamp and comparing that
with the current timestamp of obtained attribute data with time_after.
This is incorrect, as it returns true for the desired timeout period
and another full 2^31 range of jiffies.

In testing with artificial jumps (several small jumps, not one big
crank) of the jiffies I was able to reproduce a problem found in a
server with very long lived NFS mounts, where attributes would not be
refreshed even after touching files and directories in the server:

Initial uptime:
03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07

NFS volume is mounted and time is advanced:
03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Dec 17 03:38 /local/A/foo/bar
-rw-r--r--  1 root root 0 Nov 22 00:36 /nfs/A/foo/bar

# touch /local/A/foo/bar

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Dec 17 03:47 /local/A/foo/bar
-rw-r--r--  1 root root 0 Nov 22 00:36 /nfs/A/foo/bar

We can see the local mtime is updated, but the NFS mount still shows
the old value. The patch below makes it work:

Initial setup...
07:11:02 up 25 days, 1 min,  0 users,  load average: 0.15, 0.03, 0.04

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:11 /local/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:11 /nfs/A/foo/bar

# touch /local/A/foo/bar

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:14 /local/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:14 /nfs/A/foo/bar
Signed-off-by: NFabio Olive Leite <fleite@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      c7e15961
    • P
      64 bit ino support for NFS client · 4e769b93
      由 Peter Staubach 提交于 
      Hi.

Attached is a patch to modify the NFS client code to support
64 bit ino's, as appropriate for the system and the NFS
protocol version.

The code basically just expand the NFS interfaces for routines
which handle ino's from using ino_t to u64 and then uses the
fileid in the nfs_inode instead of i_ino in the inode.  The
code paths that were updated are in the getattr method and
the readdir methods.

This should be no real change on 64 bit platforms.  Since
the ino_t is an unsigned long, it would already be 64 bits
wide.

    Thanx...

           ps
Signed-off-by: NPeter Staubach <staubach@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      4e769b93
    • T
      NFS: Clean up NFS writeback flush code · ed90ef51
      由 Trond Myklebust 提交于 
      The only user of nfs_sync_mapping_range() is nfs_getattr(), which uses it
to flush out the entire inode without sending a commit. We therefore
replace nfs_sync_mapping_range with a more appropriate helper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      ed90ef51
  3. 08 8月, 2007 1 次提交
    • T
      NFS: Fix put_nfs_open_context · 5e11934d
      由 Trond Myklebust 提交于 
      We need to grab the inode->i_lock atomically with the last reference put in
order to remove the open context that is being freed from the
nfsi->open_files list.

Fix by converting the kref to a standard atomic counter and then using
atomic_dec_and_lock()...

Thanks to Arnd Bergmann for pointing out the problem.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      5e11934d
  5. 20 7月, 2007 1 次提交
    • P
      mm: Remove slab destructors from kmem_cache_create(). · 20c2df83
      由 Paul Mundt 提交于 
      Slab destructors were no longer supported after Christoph's
c59def9f change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      20c2df83
  7. 11 7月, 2007 7 次提交
  9. 22 5月, 2007 1 次提交
    • A
      Detach sched.h from mm.h · e8edc6e0
      由 Alexey Dobriyan 提交于 
      First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e8edc6e0
  11. 17 5月, 2007 1 次提交
    • C
      Remove SLAB_CTOR_CONSTRUCTOR · a35afb83
      由 Christoph Lameter 提交于 
      SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a35afb83
  13. 10 5月, 2007 1 次提交
  15. 08 5月, 2007 1 次提交
    • C
      slab allocators: Remove SLAB_DEBUG_INITIAL flag · 50953fe9
      由 Christoph Lameter 提交于 
      I have never seen a use of SLAB_DEBUG_INITIAL.  It is only supported by
SLAB.

I think its purpose was to have a callback after an object has been freed
to verify that the state is the constructor state again?  The callback is
performed before each freeing of an object.

I would think that it is much easier to check the object state manually
before the free.  That also places the check near the code object
manipulation of the object.

Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
compiled with SLAB debugging on.  If there would be code in a constructor
handling SLAB_DEBUG_INITIAL then it would have to be conditional on
SLAB_DEBUG otherwise it would just be dead code.  But there is no such code
in the kernel.  I think SLUB_DEBUG_INITIAL is too problematic to make real
use of, difficult to understand and there are easier ways to accomplish the
same effect (i.e.  add debug code before kfree).

There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
clear in fs inode caches.  Remove the pointless checks (they would even be
pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.

This is the last slab flag that SLUB did not support.  Remove the check for
unimplemented flags from SLUB.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      50953fe9
  17. 15 4月, 2007 1 次提交
  19. 17 3月, 2007 1 次提交
  21. 13 2月, 2007 2 次提交
  23. 04 2月, 2007 1 次提交
  25. 25 1月, 2007 1 次提交
  27. 09 12月, 2006 1 次提交
  29. 08 12月, 2006 2 次提交
  31. 06 12月, 2006 1 次提交
  33. 21 10月, 2006 2 次提交
  35. 27 9月, 2006 3 次提交
  37. 23 9月, 2006 7 次提交
    • C
      NFS: add comments clarifying the use of nfs_post_op_update() · f551e44f
      由 Chuck Lever 提交于 
      Comments-only change to clarify a detail of the NFS protocol and how it is
implemented in Linux.

Test plan:
None.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      f551e44f
    • T
      NFS: Don't invalidate the symlink we just stuffed into the cache · 97db8f41
      由 Trond Myklebust 提交于 
      And slight optimisation of nfs_end_data_update(): directories never have
delegations anyway.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      97db8f41
    • D
      NFS: Add server and volume lists to /proc · 6aaca566
      由 David Howells 提交于 
      Make two new proc files available:

	/proc/fs/nfsfs/servers
	/proc/fs/nfsfs/volumes

The first lists the servers with which we are currently dealing (struct
nfs_client), and the second lists the volumes we have on those servers (struct
nfs_server).
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      6aaca566
    • D
      NFS: Share NFS superblocks per-protocol per-server per-FSID · 54ceac45
      由 David Howells 提交于 
      The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.

It does this by creating each superblock with a false root and returning the
real root dentry in the vfsmount presented by get_sb(). The root dentry set
starts off as an anonymous dentry if we don't already have the dentry for its
inode, otherwise it simply returns the dentry we already have.

We may thus end up with several trees of dentries in the superblock, and if at
some later point one of anonymous tree roots is discovered by normal filesystem
activity to be located in another tree within the superblock, the anonymous
root is named and materialises attached to the second tree at the appropriate
point.

Why do it this way? Why not pass an extra argument to the mount() syscall to
indicate the subpath and then pathwalk from the server root to the desired
directory? You can't guarantee this will work for two reasons:

 (1) The root and intervening nodes may not be accessible to the client.

     With NFS2 and NFS3, for instance, mountd is called on the server to get
     the filehandle for the tip of a path. mountd won't give us handles for
     anything we don't have permission to access, and so we can't set up NFS
     inodes for such nodes, and so can't easily set up dentries (we'd have to
     have ghost inodes or something).

     With this patch we don't actually create dentries until we get handles
     from the server that we can use to set up their inodes, and we don't
     actually bind them into the tree until we know for sure where they go.

 (2) Inaccessible symbolic links.

     If we're asked to mount two exports from the server, eg:

	mount warthog:/warthog/aaa/xxx /mmm
	mount warthog:/warthog/bbb/yyy /nnn

     We may not be able to access anything nearer the root than xxx and yyy,
     but we may find out later that /mmm/www/yyy, say, is actually the same
     directory as the one mounted on /nnn. What we might then find out, for
     example, is that /warthog/bbb was actually a symbolic link to
     /warthog/aaa/xxx/www, but we can't actually determine that by talking to
     the server until /warthog is made available by NFS.

     This would lead to having constructed an errneous dentry tree which we
     can't easily fix. We can end up with a dentry marked as a directory when
     it should actually be a symlink, or we could end up with an apparently
     hardlinked directory.

     With this patch we need not make assumptions about the type of a dentry
     for which we can't retrieve information, nor need we assume we know its
     place in the grand scheme of things until we actually see that place.

This patch reduces the possibility of aliasing in the inode and page caches for
inodes that may be accessed by more than one NFS export. It also reduces the
number of superblocks required for NFS where there are many NFS exports being
used from a server (home directory server + autofs for example).

This in turn makes it simpler to do local caching of network filesystems, as it
can then be guaranteed that there won't be links from multiple inodes in
separate superblocks to the same cache file.

Obviously, cache aliasing between different levels of NFS protocol could still
be a problem, but at least that gives us another key to use when indexing the
cache.

This patch makes the following changes:

 (1) The server record construction/destruction has been abstracted out into
     its own set of functions to make things easier to get right.  These have
     been moved into fs/nfs/client.c.

     All the code in fs/nfs/client.c has to do with the management of
     connections to servers, and doesn't touch superblocks in any way; the
     remaining code in fs/nfs/super.c has to do with VFS superblock management.

 (2) The sequence of events undertaken by NFS mount is now reordered:

     (a) A volume representation (struct nfs_server) is allocated.

     (b) A server representation (struct nfs_client) is acquired.  This may be
     	 allocated or shared, and is keyed on server address, port and NFS
     	 version.

     (c) If allocated, the client representation is initialised.  The state
     	 member variable of nfs_client is used to prevent a race during
     	 initialisation from two mounts.

     (d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find
     	 the root filehandle for the mount (fs/nfs/getroot.c).  For NFS2/3 we
     	 are given the root FH in advance.

     (e) The volume FSID is probed for on the root FH.

     (f) The volume representation is initialised from the FSINFO record
     	 retrieved on the root FH.

     (g) sget() is called to acquire a superblock.  This may be allocated or
     	 shared, keyed on client pointer and FSID.

     (h) If allocated, the superblock is initialised.

     (i) If the superblock is shared, then the new nfs_server record is
     	 discarded.

     (j) The root dentry for this mount is looked up from the root FH.

     (k) The root dentry for this mount is assigned to the vfsmount.

 (3) nfs_readdir_lookup() creates dentries for each of the entries readdir()
     returns; this function now attaches disconnected trees from alternate
     roots that happen to be discovered attached to a directory being read (in
     the same way nfs_lookup() is made to do for lookup ops).

     The new d_materialise_unique() function is now used to do this, thus
     permitting the whole thing to be done under one set of locks, and thus
     avoiding any race between mount and lookup operations on the same
     directory.

 (4) The client management code uses a new debug facility: NFSDBG_CLIENT which
     is set by echoing 1024 to /proc/net/sunrpc/nfs_debug.

 (5) Clone mounts are now called xdev mounts.

 (6) Use the dentry passed to the statfs() op as the handle for retrieving fs
     statistics rather than the root dentry of the superblock (which is now a
     dummy).
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      54ceac45
    • D
      NFS: Move rpc_ops from nfs_server to nfs_client · 8fa5c000
      由 David Howells 提交于 
      Move the rpc_ops from the nfs_server struct to the nfs_client struct as they're
common to all server records of a particular NFS protocol version.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      8fa5c000
    • T
      NFS: Add a global LRU list for the ACCESS cache · cfcea3e8
      由 Trond Myklebust 提交于 
      ...in order to allow the addition of a memory shrinker.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      cfcea3e8
    • T
      NFS: Add a new ACCESS rpc call cache to the linux nfs client · 1c3c07e9
      由 Trond Myklebust 提交于 
      The current access cache only allows one entry at a time to be cached for each
inode. Add a per-inode red-black tree in order to allow more than one to
be cached at a time.

Should significantly cut down the time spent in path traversal for shared
directories such as ${PATH}, /usr/share, etc.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      1c3c07e9