The atmel-mci driver sometimes fails data transfers like this:

   mmcblk0: error -5 transferring data
   end_request: I/O error, dev mmcblk0, sector 2749769
   end_request: I/O error, dev mmcblk0, sector 2749777

It turns out that this might be caused by the BLKR register (which
contains the block size and the number of blocks being transfered) being
initialized too late. This patch moves the initialization of BLKR so
that it contains the correct value before the block transfer command is
sent.

This error is difficult to reproduce, but if you insert a long delay
(mdelay(10) or thereabouts) between the calls to atmci_start_command()
and atmci_submit_data(), all transfers seem to fail without this patch,
while I haven't seen any failures with this patch.
Reported-by: NHein_Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported-by: N"Steven Noonan" <steven@uplinklabs.net>
Suggested-by: N"Elias Oltmanns" <eo@nebensachen.de>
Cc: mingo@elte.hu
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The Optiarc DVD RW AD-7200A can play audio, but tells it could not.
Signed-off-by: NBodo Eggert <7eggert@gmx.de>
Tested-by: NNick Warne <nick@ukfsn.org>
Received-from: Borislav Petkov <petkovbb@googlemail.com>
[bart: keep "audio" quirks together]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes,
judging from the code immediately preceding this check.  So, we must never try
to "split" the PRD for TRM290.

This is probably never hit anyway -- with the DMA buffers aligned to at least
512 bytes and ATAPI DMA not being used for non block I/O commands...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602.

A more generic fix for drives which cannot autoclose tray will follow.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
[bart: add an extra parentheses for consistency with the rest of kernel code]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fixed audio clicking problem which could be heard when using analog tv or composite input
Signed-off-by: NWiktor Grebla <greblus@gmail.com>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Correct firmware type to MTS
Correct audio routing for composite/s-video
Add DVB-T detection.

This patch uses the eeprom hash method for detection as the vendor/product
ids are also used for the DIGIVOX_AD. This may be a clone of the same
product. Explanatory text has been added prior to the hask look-up in
anticipation that it may help others.

The following has been tested to work:
Analogue TV (PAL-I)
Composite In
DVB-T (UK Crystal Palace)
USB AUDIO

The following has not been tested but probably works:
S-Video In
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This makes auto gain functional on 04fc:0561.
Signed-off-by: NShane <gnome42@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c:

INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc
INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975
...

A fixed size 8-byte buffer is allocated, and a variable size field is read
into it; there is no particular bound on the size of the field (it is
dependent on hardware and configuration) and it can overflow [also
verified by inserting printk's.]

The patch attempts to size the buffer to the correctly.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00.

Thanks to Oliver Endriss for pointing that out.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Different backends have different input busses (saa7146, flexcop).
To reflect that a config-option to the s5h1420-driver was added which makes
the output mode selectable.

Furthermore the s5h1420-driver is now doing the same i2c-method as it was done
before adding support for other i2c-users.

This patch needs to go into the current release of the kernel, as this driver
is currently broken.

(Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.)
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback,
dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and
dvb_dmx_swfilter_204 may be called from both interrupt and process
context. Therefore they need to be protected by spin_lock_irqsave()
instead of spin_lock().

This fixes a deadlock discovered by lockdep.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

2040:5510 is the same hardware as 2040:5500
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to
load the proper firmware to prevent the device from overheating.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixes videobuf field_count
Signed-off-by: NDean Anderson <dean@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The zr36067 driver is improperly declaring pixel format RGBP twice,
once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is
actually RGBR. Fix the code to properly map both pixel formats.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

sparc32 allmodconfig:

drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf':
drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN'
drivers/media/video/cafe_ccic.c: At top level:
drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type
drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer
drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer
drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops')
drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer
drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer
drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops')
drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap':
drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function)
drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once
drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.)
drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function)
drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function)

This build breakage is caused by some header file shuffle in linux-next.  But
I suggest that this patch be merged ahead of linux-next to avoid bisection
breakage.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The zr36067 driver should return the actual bytes-per-line value when
queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space
applications can get confused.

Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the
bytes-per-line value. And we shouldn't fail if the caller sets the
initial value to something different from 0. This is perfectly valid
for applications to pre-fill this field with the value they expect.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Restore the default pixel format to YUYV as it used to be before
kernel 2.6.23. It was accidentally changed to BGR3 by commit
603d6f2c.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix the following crash in the bttv driver:

BUG: unable to handle kernel NULL pointer dereference at 000000000000036c
IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv]

This happens because radio_open assumes that all present bttv devices
have a radio function. If a bttv device without radio and one with
radio are installed on the same system, and the one without radio is
registered first, then radio_open checks for the radio device number
of a bttv device that has no radio function, and this breaks. All we
have to do to fix it is to skip bttv devices without a radio function.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800
Signed-off-by: NDouglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

CS2102K stop streaming on setlightfreq (50Hz & 60Hz).
Disable it for now until a correct solution is found.
Signed-off-by: NCostantino Leandro <le_costantino@pixartargentina.com.ar>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Earlier fixes to get the tuner audio working correctly broke the audio
on the Compro VideoMate H900 cards. This is now fixed.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits
of physical devices corresponding to the ACPI devices and make those bits
be set initially for devices that are enabled to wake up by default.  This
is needed to restore the 2.6.26 and earlier behavior for the PCI devices
that were previously handled correctly with the help of the
/proc/acpi/wakeup interface.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check the return value of led_classdev_register and unregister all
registered devices, if registering one device fails.  Also the dynamic
memory handling is totally bogus.  You can't allocate multiple chunks via
kzalloc() and expect them to be in order later.  I wonder how this ever
worked.
Signed-off-by: NSven Wegener <sven.wegener@stealer.net>
Acked-by: NNate Case <ncase@xes-inc.com>
Tested-by: NNate Case <ncase@xes-inc.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On initialization, we first do the ioremap and then register the led devices.
On deinitialization, we do it in reverse order. This prevents someone calling
into the brightness_set functions with an invalid latch_address.
Signed-off-by: NSven Wegener <sven.wegener@stealer.net>
Acked-by: NRod Whitby <rod@whitby.id.au>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is
obviously wrong, and could theoretically cause the driver to hang.
Reported-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Accept zero (the default!) as a per-transfer clock speed override.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix infinite recursive notifier in the fbdev layer.  This causes recursive
locking.  Dmitry Baryshkov found the problem and confirmed that the patch
fixes the bug.

After doing
# echo 1 > /sys/class/graphics/fb0/blank
I got the following in my kernel log:

=============================================
[ INFO: possible recursive locking detected ]
2.6.27-rc6-00086-gda63874-dirty #97
---------------------------------------------
echo/1564 is trying to acquire lock:
 ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c

but task is already holding lock:
 ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c

other info that might help us debug this:
2 locks held by echo/1564:
 #0:  (&buffer->mutex){--..}, at: [<c00ddde0>] sysfs_write_file+0x30/0x80
 #1:  ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c

stack backtrace:
[<c0029fe4>] (dump_stack+0x0/0x14) from [<c0060ce0>] (print_deadlock_bug+0xa4/0xd0)
[<c0060c3c>] (print_deadlock_bug+0x0/0xd0) from [<c0060e54>] (check_deadlock+0x148/0x17c)
 r6:c397a1e0 r5:c397a530 r4:c04fcf98
[<c0060d0c>] (check_deadlock+0x0/0x17c) from [<c00637e8>] (validate_chain+0x3c4/0x4f0)
[<c0063424>] (validate_chain+0x0/0x4f0) from [<c0063efc>] (__lock_acquire+0x5e8/0x6b4)
[<c0063914>] (__lock_acquire+0x0/0x6b4) from [<c006402c>] (lock_acquire+0x64/0x78)
[<c0063fc8>] (lock_acquire+0x0/0x78) from [<c0316ca8>] (down_read+0x4c/0x60)
 r7:00000009 r6:ffffffff r5:c0427a40 r4:c005a384
[<c0316c5c>] (down_read+0x0/0x60) from [<c005a384>] (__blocking_notifier_call_chain+0x38/0x6c)
 r5:c0427a40 r4:c0427a74
[<c005a34c>] (__blocking_notifier_call_chain+0x0/0x6c) from [<c005a3d8>] (blocking_notifier_call_chain+0x20/0x28)
 r8:00000009 r7:c086d640 r6:c3967940 r5:00000000 r4:c38984b8
[<c005a3b8>] (blocking_notifier_call_chain+0x0/0x28) from [<c014baa0>] (fb_notifier_call_chain+0x1c/0x24)
[<c014ba84>] (fb_notifier_call_chain+0x0/0x24) from [<c014c18c>] (fb_blank+0x64/0x70)
[<c014c128>] (fb_blank+0x0/0x70) from [<c0155978>] (fbcon_blank+0x114/0x1bc)
 r5:00000001 r4:c38984b8
[<c0155864>] (fbcon_blank+0x0/0x1bc) from [<c0170ea8>] (do_blank_screen+0x1e0/0x2a0)
[<c0170cc8>] (do_blank_screen+0x0/0x2a0) from [<c0154024>] (fbcon_fb_blanked+0x74/0x94)
 r5:c3967940 r4:00000001
[<c0153fb0>] (fbcon_fb_blanked+0x0/0x94) from [<c0154228>] (fbcon_event_notify+0x100/0x12c)
 r5:fffffffe r4:c39bc194
[<c0154128>] (fbcon_event_notify+0x0/0x12c) from [<c005a0d4>] (notifier_call_chain+0x38/0x7c)
[<c005a09c>] (notifier_call_chain+0x0/0x7c) from [<c005a3a0>] (__blocking_notifier_call_chain+0x54/0x6c)
 r8:c3b51ea0 r7:00000009 r6:ffffffff r5:c0427a40 r4:c0427a74
[<c005a34c>] (__blocking_notifier_call_chain+0x0/0x6c) from [<c005a3d8>] (blocking_notifier_call_chain+0x20/0x28)
 r8:00000001 r7:c3a7e000 r6:00000000 r5:00000000 r4:c38984b8
[<c005a3b8>] (blocking_notifier_call_chain+0x0/0x28) from [<c014baa0>] (fb_notifier_call_chain+0x1c/0x24)
[<c014ba84>] (fb_notifier_call_chain+0x0/0x24) from [<c014c18c>] (fb_blank+0x64/0x70)
[<c014c128>] (fb_blank+0x0/0x70) from [<c014e450>] (store_blank+0x54/0x7c)
 r5:c38984b8 r4:c3b51ec4
[<c014e3fc>] (store_blank+0x0/0x7c) from [<c017981c>] (dev_attr_store+0x28/0x2c)
 r8:00000001 r7:c042bf80 r6:c39eba10 r5:c3967c30 r4:c38e0140
[<c01797f4>] (dev_attr_store+0x0/0x2c) from [<c00ddaac>] (flush_write_buffer+0x54/0x68)
[<c00dda58>] (flush_write_buffer+0x0/0x68) from [<c00dde08>] (sysfs_write_file+0x58/0x80)
 r8:c3b51f78 r7:c3bcb070 r6:c39eba10 r5:00000001 r4:00000001
[<c00dddb0>] (sysfs_write_file+0x0/0x80) from [<c009de04>] (vfs_write+0xb8/0x148)
[<c009dd4c>] (vfs_write+0x0/0x148) from [<c009e384>] (sys_write+0x44/0x70)
 r7:00000004 r6:c3bcb070 r5:00000000 r4:00000000
[<c009e340>] (sys_write+0x0/0x70) from [<c0025d00>] (ret_fast_syscall+0x0/0x2c)
 r6:4001b000 r5:00000001 r4:401dc658
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reported-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Testted-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When userspace uses SIGIO notification and forgets to disable it before
closing file descriptor, rtc->async_queue contains stale pointer to struct
file.  When user space enables again SIGIO notification in different
process, kernel dereferences this (poisoned) pointer and crashes.

So disable SIGIO notification on close.

Kernel panic:
(second run of qemu (requires echo 1024 > /sys/class/rtc/rtc0/max_user_freq))

general protection fault: 0000 [1] PREEMPT
CPU 0
Modules linked in: af_packet snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq usbhid tuner tea5767 tda8290 tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tda9875 uhci_hcd ehci_hcd usbcore bttv snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer ir_common compat_ioctl32 snd_page_alloc videodev v4l1_compat snd_mpu401_uart snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core snd_seq_device snd btcx_risc soundcore tveeprom i2c_viapro
Pid: 5781, comm: qemu-system-x86 Not tainted 2.6.27-rc6 #363
RIP: 0010:[<ffffffff8024f891>]  [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f
RSP: 0000:ffffffff80674cb8  EFLAGS: 00010002
RAX: ffff8800224c62f0 RBX: 0000000000000046 RCX: 0000000000000002
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800224c62f0
RBP: ffffffff80674d08 R08: 0000000000000002 R09: 0000000000000001
R10: ffffffff80238941 R11: 0000000000000001 R12: 0000000000000000
R13: 6b6b6b6b6b6b6b6b R14: ffff88003a450080 R15: 0000000000000000
FS:  00007f98b69516f0(0000) GS:ffffffff80623200(0000) knlGS:00000000f7cc86d0
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000a87000 CR3: 0000000022598000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process qemu-system-x86 (pid: 5781, threadinfo ffff880028812000, task ffff88003a450080)
Stack:  ffffffff80674cf8 0000000180238440 0000000200000002 0000000000000000
 ffff8800224c62f0 0000000000000046 0000000000000000 0000000000000002
 0000000000000002 0000000000000000 ffffffff80674d68 ffffffff8024fc7a
Call Trace:
 <IRQ>  [<ffffffff8024fc7a>] lock_acquire+0x85/0xa9
 [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184
 [<ffffffff80491d1f>] _read_lock+0x3e/0x4a
 [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184
 [<ffffffff8029cb62>] send_sigio+0x2a/0x184
 [<ffffffff8024fb97>] ? __lock_acquire+0x6e1/0x73f
 [<ffffffff8029cd4d>] ? kill_fasync+0x2c/0x4e
 [<ffffffff8029cd10>] __kill_fasync+0x54/0x65
 [<ffffffff8029cd5b>] kill_fasync+0x3a/0x4e
 [<ffffffff80402896>] rtc_update_irq+0x9c/0xa5
 [<ffffffff80404640>] cmos_interrupt+0xae/0xc0
 [<ffffffff8025d1c1>] handle_IRQ_event+0x25/0x5a
 [<ffffffff8025e5e4>] handle_edge_irq+0xdd/0x123
 [<ffffffff8020da34>] do_IRQ+0xe4/0x144
 [<ffffffff8020bad6>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad
 [<ffffffff8033fe67>] ? clear_page_c+0x7/0x10
 [<ffffffff8026fc10>] ? get_page_from_freelist+0x385/0x450
 [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad
 [<ffffffff80280aac>] ? anon_vma_prepare+0x2e/0xf6
 [<ffffffff80279400>] ? handle_mm_fault+0x227/0x6a5
 [<ffffffff80494716>] ? do_page_fault+0x494/0x83f
 [<ffffffff8049251d>] ? error_exit+0x0/0xa9

Code: cc 41 39 45 28 74 24 e8 5e 1d 0f 00 85 c0 0f 84 6a 03 00 00 83 3d 8f a9 aa 00 00 be 47 03 00 00 0f 84 6a 02 00 00 e9 53 03 00 00 <41> ff 85 38 01 00 00 45 8b be 90 06 00 00 41 83 ff 2f 76 24 e8
RIP  [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f
 RSP <ffffffff80674cb8>
---[ end trace 431877d860448760 ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't print more information than fits into the string on the
stack. Combine the informational output of qdio to fit into
one line.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would
cause tons of warnings at bootup if PREEMPT was enabled because the
initcalls currently run with the kernel lock, which increments the
preempt count.

At the same time, the warning was also insufficient, since it didn't
check that interrupts were enabled.

The proper debug function to use for something that can sleep and wants
a warning if it's called in the wrong context is 'might_sleep()'.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is loosely based on a patch by Jesse Barnes to check the user-space
PCI mappings though the sysfs interfaces.  Quoting Jesse's original
explanation:

  It's fairly common for applications to map PCI resources through sysfs.
  However, with the current implementation, it's possible for an application
  to map far more than the range corresponding to the resourceN file it
  opened.  This patch plugs that hole by checking the range at mmap time,
  similar to what is done on platforms like sparc64 in their lower level
  PCI remapping routines.

  It was initially put together to help debug the e1000e NVRAM corruption
  problem, since we initially thought an X driver might be walking past the
  end of one of its mappings and clobbering the NVRAM.  It now looks like
  that's not the case, but doing the check is still important for obvious
  reasons.

and this version of the patch differs in that it uses a helper function
to clarify the code, and does all the checks in pages (instead of bytes)
in order to avoid overflows when doing "<< PAGE_SHIFT" etc.
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a mutex to the e1000e driver that would help
catch any collisions of two e1000e threads accessing hardware
at the same time.

description and patch updated by Jesse
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>