- 22 10月, 2015 1 次提交
-
-
由 David Ahern 提交于
6e28b000 ("net: Fix vti use case with oif in dst lookups for IPv6") is missing the checks on FLOWI_FLAG_SKIP_NH_OIF. Add them. Fixes: 42a7b32b ("xfrm: Add oif to dst lookups") Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Acked-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2015 2 次提交
-
-
由 Martin KaFai Lau 提交于
ip6_blackhole_route() does not initialize the newly allocated rt6_info properly. This patch: 1. Call rt6_info_init() to initialize rt6i_siblings and rt6i_uncached 2. The current rt->dst._metrics init code is incorrect: - 'rt->dst._metrics = ort->dst._metris' is not always safe - Not sure what dst_copy_metrics() is trying to do here considering ip6_rt_blackhole_cow_metrics() always returns NULL Fix: - Always do dst_copy_metrics() - Replace ip6_rt_blackhole_cow_metrics() with dst_cow_metrics_generic() 3. Mask out the RTF_PCPU bit from the newly allocated blackhole route. This bug triggers an oops (reported by Phil Sutter) in rt6_get_cookie(). It is because RTF_PCPU is set while rt->dst.from is NULL. Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Reported-by: NPhil Sutter <phil@nwl.cc> Tested-by: NPhil Sutter <phil@nwl.cc> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Julian Anastasov <ja@ssi.bg> Cc: Phil Sutter <phil@nwl.cc> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
Introduce rt6_info_init() to do the common init work for 'struct rt6_info' (after calling dst_alloc). It is a prep work to fix the rt6_info init logic in the ip6_blackhole_route(). Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Julian Anastasov <ja@ssi.bg> Cc: Phil Sutter <phil@nwl.cc> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
As originally written rt6_uncached_list_flush_dev makes no sense when called with dev == NULL as it attempts to flush all uncached routes regardless of network namespace when dev == NULL. Which is simply incorrect behavior. Furthermore at the point rt6_ifdown is called with dev == NULL no more network devices exist in the network namespace so even if the code in rt6_uncached_list_flush_dev were to attempt something sensible it would be meaningless. Therefore remove support in rt6_uncached_list_flush_dev for handling network devices where dev == NULL, and only call rt6_uncached_list_flush_dev when rt6_ifdown is called with a network device. Fixes: 8d0b94af ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister") Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: NMartin KaFai Lau <kafai@fb.com> Tested-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2015 2 次提交
-
-
由 Hannes Frederic Sowa 提交于
This is a clone of commit 2ab95749 ("ip_forward: Drop frames with attached skb->sk") for ipv6. This commit has exactly the same reasons as the above mentioned commit, namely to prevent panics during netfilter reload or a misconfigured stack. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
GRE point-to-point interfaces should also support ipv6 multicast. Setting up default multicast routes on interface creation was forgotten. Add it. Bugzilla: <https://bugzilla.kernel.org/show_bug.cgi?id=103231> Cc: Julien Muchembled <jm@jmuchemb.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dumazet <ndumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2015 1 次提交
-
-
由 David Ahern 提交于
It occurred to me yesterday that 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b ("xfrm: Add oif to dst lookups") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 9月, 2015 1 次提交
-
-
由 David Ahern 提交于
Wolfgang reported that IPv6 stack is ignoring oif in output route lookups: With ipv6, ip -6 route get always returns the specific route. $ ip -6 r 2001:db8:e2::1 dev enp2s0 proto kernel metric 256 2001:db8:e2::/64 dev enp2s0 metric 1024 2001:db8:e3::1 dev enp3s0 proto kernel metric 256 2001:db8:e3::/64 dev enp3s0 metric 1024 fe80::/64 dev enp3s0 proto kernel metric 256 default via 2001:db8:e3::255 dev enp3s0 metric 1024 $ ip -6 r get 2001:db8:e2::100 2001:db8:e2::100 from :: dev enp2s0 src 2001:db8:e3::1 metric 0 cache $ ip -6 r get 2001:db8:e2::100 oif enp3s0 2001:db8:e2::100 from :: dev enp2s0 src 2001:db8:e3::1 metric 0 cache The stack does consider the oif but a mismatch in rt6_device_match is not considered fatal because RT6_LOOKUP_F_IFACE is not set in the flags. Cc: Wolfgang Nothdurft <netdev@linux-dude.de> Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2015 2 次提交
-
-
由 Matt Bennett 提交于
Currently error log messages in ip6_tnl_err are printed at 'warn' level. This is different to other tunnel types which don't print any messages. These log messages don't provide any information that couldn't be deduced with networking tools. Also it can be annoying to have one end of the tunnel go down and have the logs fill with pointless messages such as "Path to destination invalid or inactive!". This patch reduces the log level of these messages to 'dbg' level to bring the visible behaviour into line with other tunnel types. Signed-off-by: NMatt Bennett <matt.bennett@alliedtelesis.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Bennett 提交于
Currently error log messages in ip6gre_err are printed at 'warn' level. This is different to most other tunnel types which don't print any messages. These log messages don't provide any information that couldn't be deduced with networking tools. Also it can be annoying to have one end of the tunnel go down and have the logs fill with pointless messages such as "Path to destination invalid or inactive!". This patch reduces the log level of these messages to 'dbg' level to bring the visible behaviour into line with other tunnel types. Signed-off-by: NMatt Bennett <matt.bennett@alliedtelesis.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2015 1 次提交
-
-
由 Nikola Forró 提交于
Man page of ip-route(8) says following about route types: unreachable - these destinations are unreachable. Packets are dis‐ carded and the ICMP message host unreachable is generated. The local senders get an EHOSTUNREACH error. blackhole - these destinations are unreachable. Packets are dis‐ carded silently. The local senders get an EINVAL error. prohibit - these destinations are unreachable. Packets are discarded and the ICMP message communication administratively prohibited is generated. The local senders get an EACCES error. In the inet6 address family, this was correct, except the local senders got ENETUNREACH error instead of EHOSTUNREACH in case of unreachable route. In the inet address family, all three route types generated ICMP message net unreachable, and the local senders got ENETUNREACH error. In both address families all three route types now behave consistently with documentation. Signed-off-by: NNikola Forró <nforro@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2015 2 次提交
-
-
由 Florian Westphal 提交于
David Woodhouse reports skb_under_panic when we try to push ethernet header to fragmented ipv6 skbs: skbuff: skb_under_panic: text:c1277f1e len:1294 put:14 head:dec98000 data:dec97ffc tail:0xdec9850a end:0xdec98f40 dev:br-lan [..] ip6_finish_output2+0x196/0x4da David further debugged this: [..] offending fragments were arriving here with skb_headroom(skb)==10. Which is reasonable, being the Solos ADSL card's header of 8 bytes followed by 2 bytes of PPP frame type. The problem is that if netfilter ipv6 defragmentation is used, skb_cow() in ip6_forward will only see reassembled skb. Therefore, headroom is overestimated by 8 bytes (we pulled fragment header) and we don't check the skbs in the frag_list either. We can't do these checks in netfilter defrag since outdev isn't known yet. Furthermore, existing tests in ip6_fragment did not consider the fragment or ipv6 header size when checking headroom of the fraglist skbs. While at it, also fix a skb leak on memory allocation -- ip6_fragment must consume the skb. I tested this e1000 driver hacked to not allocate additional headroom (we end up in slowpath, since LL_RESERVED_SPACE is 16). If 2 bytes of headroom are allocated, fastpath is taken (14 byte ethernet header was pulled, so 16 byte headroom available in all fragments). Reported-by: NDavid Woodhouse <dwmw2@infradead.org> Diagnosed-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NFlorian Westphal <fw@strlen.de> Tested-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch adds NLM_F_REPLACE flag to ipv6 route replace notifications. This makes nlm_flags in ipv6 replace notifications consistent with ipv4. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2015 5 次提交
-
-
由 Martin KaFai Lau 提交于
This patch uses a seqlock to ensure consistency between idst->dst and idst->cookie. It also makes dst freeing from fib tree to undergo a rcu grace period. Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
It is a prep work to get dst freeing from fib tree undergo a rcu grace period. The following is a common paradigm: if (ip6_del_rt(rt)) dst_free(rt) which means, if rt cannot be deleted from the fib tree, dst_free(rt) now. 1. We don't know the ip6_del_rt(rt) failure is because it was not managed by fib tree (e.g. DST_NOCACHE) or it had already been removed from the fib tree. 2. If rt had been managed by the fib tree, ip6_del_rt(rt) failure means dst_free(rt) has been called already. A second dst_free(rt) is not always obviously safe. The rt may have been destroyed already. 3. If rt is a DST_NOCACHE, dst_free(rt) should not be called. 4. It is a stopper to make dst freeing from fib tree undergo a rcu grace period. This patch is to use a DST_NOCACHE flag to indicate a rt is not managed by the fib tree. Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
Problems in the current dst_entry cache in the ip6_tunnel: 1. ip6_tnl_dst_set is racy. There is no lock to protect it: - One major problem is that the dst refcnt gets messed up. F.e. the same dst_cache can be released multiple times and then triggering the infamous dst refcnt < 0 warning message. - Another issue is the inconsistency between dst_cache and dst_cookie. It can be reproduced by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. 2. ip6_tnl_dst_get does not take the dst refcnt before returning the dst. This patch: 1. Create a percpu dst_entry cache in ip6_tnl 2. Use a spinlock to protect the dst_cache operations 3. ip6_tnl_dst_get always takes the dst refcnt before returning Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch rename: 1. ip6_tnl_dst_check() to ip6_tnl_dst_get() to better reflect that it will take a dst refcnt in the next patch. 2. ip6_tnl_dst_store() to ip6_tnl_dst_set() to have a more conventional name matching with ip6_tnl_dst_get(). Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch refactors some common init codes used by both ip6gre_tunnel_init and ip6gre_tap_init. Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 9月, 2015 3 次提交
-
-
由 Wu Fengguang 提交于
net/ipv6/route.c:2946:3-8: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Sutter 提交于
This switches IPv6 policy routing to use the shared fib_default_rule_pref() function of IPv4 and DECnet. It is also used in multicast routing for IPv4 as well as IPv6. The motivation for this patch is a complaint about iproute2 behaving inconsistent between IPv4 and IPv6 when adding policy rules: Formerly, IPv6 rules were assigned a fixed priority of 0x3FFF whereas for IPv4 the assigned priority value was decreased with each rule added. Since then all users of the default_pref field have been converted to assign the generic function fib_default_rule_pref(), fib_nl_newrule() may just use it directly instead. Therefore get rid of the function pointer altogether and make fib_default_rule_pref() static, as it's not used outside fib_rules.c anymore. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
Problem: The ecmp route replace support for ipv6 in the kernel, deletes the existing ecmp route too early, ie when it installs the first nexthop. If there is an error in installing the subsequent nexthops, its too late to recover the already deleted existing route leaving the fib in an inconsistent state. This patch reduces the possibility of this by doing the following: a) Changes the existing multipath route add code to a two stage process: build rt6_infos + insert them ip6_route_add rt6_info creation code is moved into ip6_route_info_create. b) This ensures that most errors are caught during building rt6_infos and we fail early c) Separates multipath add and del code. Because add needs the special two stage mode in a) and delete essentially does not care. d) In any event if the code fails during inserting a route again, a warning is printed (This should be unlikely) Before the patch: $ip -6 route show 3000:1000:1000:1000::2 via fe80::202:ff:fe00:b dev swp49s0 metric 1024 3000:1000:1000:1000::2 via fe80::202:ff:fe00:d dev swp49s1 metric 1024 3000:1000:1000:1000::2 via fe80::202:ff:fe00:f dev swp49s2 metric 1024 /* Try replacing the route with a duplicate nexthop */ $ip -6 route change 3000:1000:1000:1000::2/128 nexthop via fe80::202:ff:fe00:b dev swp49s0 nexthop via fe80::202:ff:fe00:d dev swp49s1 nexthop via fe80::202:ff:fe00:d dev swp49s1 RTNETLINK answers: File exists $ip -6 route show /* previously added ecmp route 3000:1000:1000:1000::2 dissappears from * kernel */ After the patch: $ip -6 route show 3000:1000:1000:1000::2 via fe80::202:ff:fe00:b dev swp49s0 metric 1024 3000:1000:1000:1000::2 via fe80::202:ff:fe00:d dev swp49s1 metric 1024 3000:1000:1000:1000::2 via fe80::202:ff:fe00:f dev swp49s2 metric 1024 /* Try replacing the route with a duplicate nexthop */ $ip -6 route change 3000:1000:1000:1000::2/128 nexthop via fe80::202:ff:fe00:b dev swp49s0 nexthop via fe80::202:ff:fe00:d dev swp49s1 nexthop via fe80::202:ff:fe00:d dev swp49s1 RTNETLINK answers: File exists $ip -6 route show 3000:1000:1000:1000::2 via fe80::202:ff:fe00:b dev swp49s0 metric 1024 3000:1000:1000:1000::2 via fe80::202:ff:fe00:d dev swp49s1 metric 1024 3000:1000:1000:1000::2 via fe80::202:ff:fe00:f dev swp49s2 metric 1024 Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2015 1 次提交
-
-
由 Richard Laing 提交于
In the IPv6 multicast routing code the mrt_lock was not being released correctly in the MFC iterator, as a result adding or deleting a MIF would cause a hang because the mrt_lock could not be acquired. This fix is a copy of the code for the IPv4 case and ensures that the lock is released correctly. Signed-off-by: NRichard Laing <richard.laing@alliedtelesis.co.nz> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2015 2 次提交
-
-
由 Daniel Borkmann 提交于
While testing various Kconfig options on another issue, I found that the following one triggers as well on allmodconfig and nf_conntrack disabled: net/ipv4/netfilter/nf_dup_ipv4.c: In function ‘nf_dup_ipv4’: net/ipv4/netfilter/nf_dup_ipv4.c:72:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) [...] net/ipv6/netfilter/nf_dup_ipv6.c: In function ‘nf_dup_ipv6’: net/ipv6/netfilter/nf_dup_ipv6.c:66:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) Fix it by including directly the header where it is defined. Fixes: bbde9fc1 ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
We previously register IPPROTO_ROUTING offload under inet6_add_offload(), but in error path, we try to unregister it with inet_del_offload(). This doesn't seem correct, it should actually be inet6_del_offload(), also ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it also uses rthdr_offload twice), but it got removed entirely later on. Fixes: 3336288a ("ipv6: Switch to using new offload infrastructure.") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2015 5 次提交
-
-
由 Marius Tomaschewski 提交于
Signed-off-by: NMarius Tomaschewski <mt@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marius Tomaschewski 提交于
The kernel is applying the RA managed/otherconf flags silently and forgets to send ifinfo notify to inform about their change when the router provides a zero reachable_time and retrans_timer as dnsmasq and many routers send it, which just means unspecified by this router and the host should continue using whatever value it is already using. Userspace may monitor the ifinfo notifications to activate dhcpv6. Signed-off-by: NMarius Tomaschewski <mt@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Currently, the following case doesn't use DCTCP, even if it should: A responder has f.e. Cubic as system wide default, but for a specific route to the initiating host, DCTCP is being set in RTAX_CC_ALGO. The initiating host then uses DCTCP as congestion control, but since the initiator sets ECT(0), tcp_ecn_create_request() doesn't set ecn_ok, and we have to fall back to Reno after 3WHS completes. We were thinking on how to solve this in a minimal, non-intrusive way without bloating tcp_ecn_create_request() needlessly: lets cache the CA ecn option flag in RTAX_FEATURES. In other words, when ECT(0) is set on the SYN packet, set ecn_ok=1 iff route RTAX_FEATURES contains the unexposed (internal-only) DST_FEATURE_ECN_CA. This allows to only do a single metric feature lookup inside tcp_ecn_create_request(). Joint work with Florian Westphal. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Feature bits that are invalid should not be accepted by the kernel, only the lower 4 bits may be configured, but not the remaining ones. Even from these 4, 2 of them are unused. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Reduce the identation a bit, there's no need to artificically have it increased. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2015 2 次提交
-
-
由 Raghavendra K T 提交于
Docker container creation linearly increased from around 1.6 sec to 7.5 sec (at 1000 containers) and perf data showed 50% ovehead in snmp_fold_field. reason: currently __snmp6_fill_stats64 calls snmp_fold_field that walks through per cpu data of an item (iteratively for around 36 items). idea: This patch tries to aggregate the statistics by going through all the items of each cpu sequentially which is reducing cache misses. Docker creation got faster by more than 2x after the patch. Result: Before After Docker creation time 6.836s 3.25s cache miss 2.7% 1.41% perf before: 50.73% docker [kernel.kallsyms] [k] snmp_fold_field 9.07% swapper [kernel.kallsyms] [k] snooze_loop 3.49% docker [kernel.kallsyms] [k] veth_stats_one 2.85% swapper [kernel.kallsyms] [k] _raw_spin_lock perf after: 10.57% docker docker [.] scanblock 8.37% swapper [kernel.kallsyms] [k] snooze_loop 6.91% docker [kernel.kallsyms] [k] snmp_get_cpu_field 6.67% docker [kernel.kallsyms] [k] veth_stats_one changes/ideas suggested: Using buffer in stack (Eric), Usage of memset (David), Using memcpy in place of unaligned_put (Joe). Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
For loopback purposes, RoCE devices should have a default GID in the port GID table, even when the interface is down. In order to do so, we use the IPv6 link local address which would have been genenrated for the related Ethernet netdevice when it goes up as a default GID. addrconf_ifid_eui48 is used to gernerate this address, export it. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 30 8月, 2015 2 次提交
-
-
由 Jiri Benc 提交于
By default (subject to the sysctl settings), IPv6 sockets listen also for IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in packets received through an IPv6 socket. In addition, it's currently not possible to have both IPv4 and IPv6 vxlan tunnel on the same port (unless bindv6only sysctl is enabled), as it's not possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's no way to specify both IPv4 and IPv6 remote/group IP addresses. Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not done globally in udp_tunnel, as l2tp and tipc seems to work okay when receiving IPv4 packets on IPv6 socket and people may rely on this behavior. The other tunnels (geneve and fou) do not support IPv6. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2015 2 次提交
-
-
由 Florian Westphal 提交于
bridge/netfilter/ebtables.c:290:26: warning: incorrect type in assignment (different modifiers) -> remove __pure annotation. ipv6/netfilter/ip6t_SYNPROXY.c:240:27: warning: cast from restricted __be16 -> switch ntohs to htons and vice versa. netfilter/core.c:391:30: warning: symbol 'nfq_ct_nat_hook' was not declared. Should it be static? -> delete it, got removed net/netfilter/nf_synproxy_core.c:221:48: warning: cast to restricted __be32 -> Use __be32 instead of u32. Tested with objdiff that these changes do not affect generated code. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
This reverts commit 98d1bd80. mark_source_chains will not re-visit chains, so *filter :INPUT ACCEPT [365:25776] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [217:45832] :t1 - [0:0] :t2 - [0:0] :t3 - [0:0] :t4 - [0:0] -A t1 -i lo -j t2 -A t2 -i lo -j t3 -A t3 -i lo -j t4 # -A INPUT -j t4 # -A INPUT -j t3 # -A INPUT -j t2 -A INPUT -j t1 COMMIT Will compute a chain depth of 2 if the comments are removed. Revert back to counting the number of chains for the time being. Reported-by: NCong Wang <cwang@twopensource.com> Reported-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 28 8月, 2015 1 次提交
-
-
由 Joe Stringer 提交于
Signed-off-by: NJoe Stringer <joestringer@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2015 1 次提交
-
-
由 Andreas Herz 提交于
RFC 4443 added two new codes values for ICMPv6 type 1: 5 - Source address failed ingress/egress policy 6 - Reject route to destination And RFC 7084 states in L-14 that IPv6 Router MUST send ICMPv6 Destination Unreachable with code 5 for packets forwarded to it that use an address from a prefix that has been invalidated. Codes 5 and 6 are more informative subsets of code 1. Signed-off-by: NAndreas Herz <andi@geekosphere.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 26 8月, 2015 3 次提交
-
-
由 huaibin Wang 提交于
When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by: Nhuaibin Wang <huaibin.wang@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Directs route lookups to VRF table. Compiles out if NET_VRF is not enabled. With this patch able to successfully bring up ipsec tunnels in VRFs, even with duplicate network configuration. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-