Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 24 2月, 2012 2 次提交
    • B
      PCI: collapse pcibios_resource_to_bus · fb127cb9
      由 Bjorn Helgaas 提交于 
      Everybody uses the generic pcibios_resource_to_bus() supplied by the core
now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      fb127cb9
    • B
      sparc/PCI: get rid of device resource fixups · ac1edcc5
      由 Bjorn Helgaas 提交于 
      Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

N.B. Leon apparently never uses initial BAR values, so it didn't matter
that we never fixed up the I/O resources from bus address to CPU addresses.

Other sparc uses pci_of_scan_bus(), which sets device resources directly
to CPU addresses, not bus addresses, so it didn't need pcibios_fixup_bus()
either.  But by telling the core about the offsets, we can nuke
pcibios_resource_to_bus().

CC: "David S. Miller" <davem@davemloft.net>
CC: sparclinux@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      ac1edcc5
  3. 18 1月, 2012 1 次提交
    • E
      Audit: push audit success and retcode into arch ptrace.h · d7e7528b
      由 Eric Paris 提交于 
      The audit system previously expected arches calling to audit_syscall_exit to
supply as arguments if the syscall was a success and what the return code was.
Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things
by converting from negative retcodes to an audit internal magic value stating
success or failure.  This helper was wrong and could indicate that a valid
pointer returned to userspace was a failed syscall.  The fix is to fix the
layering foolishness.  We now pass audit_syscall_exit a struct pt_reg and it
in turns calls back into arch code to collect the return value and to
determine if the syscall was a success or failure.  We also define a generic
is_syscall_success() macro which determines success/failure based on if the
value is < -MAX_ERRNO.  This works for arches like x86 which do not use a
separate mechanism to indicate syscall failure.

We make both the is_syscall_success() and regs_return_value() static inlines
instead of macros.  The reason is because the audit function must take a void*
for the regs.  (uml calls theirs struct uml_pt_regs instead of just struct
pt_regs so audit_syscall_exit can't take a struct pt_regs).  Since the audit
function takes a void* we need to use static inlines to cast it back to the
arch correct structure to dereference it.

The other major change is that on some arches, like ia64, MIPS and ppc, we
change regs_return_value() to give us the negative value on syscall failure.
THE only other user of this macro, kretprobe_example.c, won't notice and it
makes the value signed consistently for the audit functions across all archs.

In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old
audit code as the return value.  But the ptrace_64.h code defined the macro
regs_return_value() as regs[3].  I have no idea which one is correct, but this
patch now uses the regs_return_value() function, so it now uses regs[3].

For powerpc we previously used regs->result but now use the
regs_return_value() function which uses regs->gprs[3].  regs->gprs[3] is
always positive so the regs_return_value(), much like ia64 makes it negative
before calling the audit code when appropriate.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion]
Acked-by: Tony Luck <tony.luck@intel.com> [for ia64]
Acked-by: Richard Weinberger <richard@nod.at> [for uml]
Acked-by: David S. Miller <davem@davemloft.net> [for sparc]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
      d7e7528b
  5. 11 1月, 2012 1 次提交
  7. 07 1月, 2012 1 次提交
    • M
      PCI: SPARC: convert pcibios_set_master() to a non-inlined function · ba232a1f
      由 Myron Stowe 提交于 
      This patch converts SPARC's architecture-specific
'pcibios_set_master()' routine to a non-inlined function.  This will
allow follow on patches to create a generic 'pcibios_set_master()'
function using the '__weak' attribute which can be used by all
architectures as a default which, if necessary, can then be over-
ridden by architecture-specific code.

Converting 'pci_bios_set_master()' to a non-inlined function will
allow SPARC's 'pcibios_set_master()' implementation to remain
architecture-specific after the generic version is introduced and
thus, not change current behavior.

No functional change.
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      ba232a1f
  9. 04 1月, 2012 1 次提交
  11. 31 12月, 2011 1 次提交
  13. 30 12月, 2011 1 次提交
  15. 28 12月, 2011 3 次提交
  17. 12 12月, 2011 1 次提交
  19. 09 12月, 2011 1 次提交
    • T
      memblock: Fix include breakages caused by 24aa0788 · 1c16d242
      由 Tejun Heo 提交于 
      24aa0788 (memblock, x86: Replace memblock_x86_reserve/free_range()
with generic ones) removed arch/x86/include/asm/memblock.h and dropped
its inclusion from include/linux/memblock.h which breaks other
architectures which depended on the generic memblock.h pulling in the
arch specific one.

However, the proper fix isn't adding back the asm inclusion.  memblock
doesn't have any arch dependent part and doesn't need arch specific
header file and asm/memblock.h files are either practically empty or
contain mostly unrelated arch specific stuff.

* In microblaze, sh, powerpc, sparc and openrisc, asm/memblock.h is
  either empty or just contains unused MEMBLOCK_DBG() macro.  Remove
  them.

* In arm and unicore32, asm/memblock.h contains arch specific stuff.
  Include it directly from its users.  It might be a good idea to
  rename the header file to avoid confusion.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      1c16d242
  21. 04 12月, 2011 1 次提交
  23. 22 11月, 2011 1 次提交
  25. 18 11月, 2011 1 次提交
  27. 10 11月, 2011 1 次提交
    • J
      net: add wireless TX status socket option · 6e3e939f
      由 Johannes Berg 提交于 
      The 802.1X EAPOL handshake hostapd does requires
knowing whether the frame was ack'ed by the peer.
Currently, we fudge this pretty badly by not even
transmitting the frame as a normal data frame but
injecting it with radiotap and getting the status
out of radiotap monitor as well. This is rather
complex, confuses users (mon.wlan0 presence) and
doesn't work with all hardware.

To get rid of that hack, introduce a real wifi TX
status option for data frame transmissions.

This works similar to the existing TX timestamping
in that it reflects the SKB back to the socket's
error queue with a SCM_WIFI_STATUS cmsg that has
an int indicating ACK status (0/1).

Since it is possible that at some point we will
want to have TX timestamping and wifi status in a
single errqueue SKB (there's little point in not
doing that), redefine SO_EE_ORIGIN_TIMESTAMPING
to SO_EE_ORIGIN_TXSTATUS which can collect more
than just the timestamp; keep the old constant
as an alias of course. Currently the internal APIs
don't make that possible, but it wouldn't be hard
to split them up in a way that makes it possible.

Thanks to Neil Horman for helping me figure out
the functions that add the control messages.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      6e3e939f
  29. 01 11月, 2011 2 次提交
  31. 28 10月, 2011 1 次提交
    • E
      compat: sync compat_stats with statfs. · 1448c721
      由 Eric W. Biederman 提交于 
      This was found by inspection while tracking a similar
bug in compat_statfs64, that has been fixed in mainline
since decemeber.

- This fixes a bug where not all of the f_spare fields
  were cleared on mips and s390.
- Add the f_flags field to struct compat_statfs
- Copy f_flags to userspace in case someone cares.
- Use __clear_user to copy the f_spare field to userspace
  to ensure that all of the elements of f_spare are cleared.
  On some architectures f_spare is has 5 ints and on some
  architectures f_spare only has 4 ints.  Which makes
  the previous technique of clearing each int individually
  broken.

I don't expect anyone actually uses the old statfs system
call anymore but if they do let them benefit from having
the compat and the native version working the same.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      1448c721
  33. 08 10月, 2011 1 次提交
  35. 17 9月, 2011 1 次提交
  37. 21 8月, 2011 1 次提交
    • D
      sparc: Allow handling signals when stack is corrupted. · 5598473a
      由 David S. Miller 提交于 
      If we can't push the pending register windows onto the user's stack,
we disallow signal delivery even if the signal would be delivered on a
valid seperate signal stack.

Add a register window save area in the signal frame, and store any
unsavable windows there.

On sigreturn, if any windows are still queued up in the signal frame,
try to push them back onto the stack and if that fails we kill the
process immediately.

This allows the debug/tst-longjmp_chk2 glibc test case to pass.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5598473a
  39. 16 8月, 2011 2 次提交
    • M
      sparc32: unbreak arch_write_unlock() · 3f6aa0b1
      由 Mikael Pettersson 提交于 
      The sparc32 version of arch_write_unlock() is just a plain assignment.
Unfortunately this allows the compiler to schedule side-effects in a
protected region to occur after the HW-level unlock, which is broken.
E.g., the following trivial test case gets miscompiled:

	#include <linux/spinlock.h>
	rwlock_t lock;
	int counter;
	void foo(void) { write_lock(&lock); ++counter; write_unlock(&lock); }

Fixed by adding a compiler memory barrier to arch_write_unlock().  The
sparc64 version combines the barrier and assignment into a single asm(),
and implements the operation as a static inline, so that's what I did too.

Compile-tested with sparc32_defconfig + CONFIG_SMP=y.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3f6aa0b1
    • M
      sparc64: remove unnecessary macros from spinlock_64.h · a0fba3eb
      由 Mikael Pettersson 提交于 
      The sparc64 spinlock_64.h contains a number of operations defined
first as static inline functions, and then as macros with the same
names and parameters as the functions.  Maybe this was needed at
some point in the past, but now nothing seems to depend on these
macros (checked with a recursive grep looking for ifdefs on these
names).  Other archs don't define these identity-macros.

So this patch deletes these unnecessary macros.

Compile-tested with sparc64_defconfig.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a0fba3eb
  41. 05 8月, 2011 1 次提交
  43. 04 8月, 2011 1 次提交
  45. 03 8月, 2011 4 次提交
  47. 29 7月, 2011 1 次提交
    • D
      sparc: Sanitize cpu feature detection and reporting. · ac85fe8b
      由 David S. Miller 提交于 
      Instead of evaluating the cpu features for ELF_HWCAP every exec,
calculate it once at boot time.

Add AV_SPARC_* capability flag bits, compatible with what Solaris
reports to applications.

Report these capabilities once in the kernel log, and also via
/proc/cpuinfo in a new "cpucaps" entry.

If available, fetch the cpu features from the machine description
'hwcap-list' property of the 'cpu' node.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ac85fe8b
  49. 28 7月, 2011 2 次提交
    • D
      sparc: Detect and handle UltraSPARC-T3 cpu types. · 4ba991d3
      由 David S. Miller 提交于 
      The cpu compatible string we look for is "SPARC-T3".

As far as memset/memcpy optimizations go, we treat this chip the same
as Niagara-T2/T2+.  Use cache initializing stores for memset, and use
perfetch, FPU block loads, cache initializing stores, and block stores
for copies.

We use the Niagara-T2 perf support, since T3 is a close relative in
this regard.  Later we'll add support for the new events T3 can
report, plus enable T3's new "sample" mode.

For now I haven't added any new ELF hwcap flags.  We probably need
to add a couple, for example:

T2 and T3 both support the population count instruction in hardware.

T3 supports VIS3 instructions, including support (finally) for
partitioned shift.  One can also now move directly between float
and integer registers.

T3 supports instructions meant to help with Galois Field and other HPC
calculations, such as XOR multiply.  Also there are "OP and negate"
instructions, for example "fnmul" which is multiply-and-negate.

T3 recognizes the transactional memory opcodes, however since
transactional memory isn't supported: 1) 'commit' behaves as a NOP and
2) 'chkpt' always branches 3) 'rdcps' returns all zeros and 4) 'wrcps'
behaves as a NOP.

So we'll need about 3 new elf capability flags in the end to represent
all of these things.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4ba991d3
    • D
      sparc: Add T3 sun4v cpu type and hypervisor group defines. · 15e3608d
      由 David S. Miller 提交于 
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      15e3608d
  51. 27 7月, 2011 5 次提交
  53. 26 7月, 2011 1 次提交