While at it:
- media_string() -> ide_media_string()

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out device type classifying from do_identify()
to ide_classify_ata_dev() and ide_classify_atapi_dev().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set chipset type explicitly in tx4938ide and tx4939ide host drivers
  (all other host drivers were updated already).

* Remove no longer used chipset type fixup from ide_host_register().
Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Trivial CodingStyle fixup for tx4938ide and tx4939ide drivers.
Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NSergei Shtyltov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

dsc_overlap setting is not useful anymore for ide-cd so remove
"dsc_overlap" /proc setting, disallow changing the setting through
HDIO_SET_NICE ioctl and cleanup ide_cd{rom_setup,_release}().

Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Push local_irq_{save,restore}() from actual_try_to_identify()
to do_identify() and remove no longer needed local_irq_enable().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

No reason to run this function with local IRQs off.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move legacy ISA/VLB ports handling from ide-probe.c to ide-legacy.c.

* Add CONFIG_IDE_LEGACY config option to be selected by host drivers
  needing ide-legacy.c.

v2:
Fix CONFIG_IDE_LEGACY not being defined in Kconfig.
(from Takashi Iwai <tiwai@suse.de>)

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

In few places open-coded values were still being used.  Fix it.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix following errors/warnings detected by checkpatch.pl:

- WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
- WARNING: space prohibited between function name and open parenthesis '('
- ERROR: trailing whitespace
- ERROR: trailing statements should be on next line
- WARNING: printk() should include KERN_ facility level
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Let the compiler handle it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

rq->errors is overwritten later in this function.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* hpt366: set IDE_HFLAG_SERIALIZE in ->host_flags if needed
  in init_hwif_hpt366().  Remove HPT_SERIALIZE_IO while at it.

* Set IDE_HFLAG_SERIALIZE in ->host_flags if needed in
  ide_init_port().

* Convert init_irq() to use IDE_HFLAG_SERIALIZE together with
  hwif->host to find out ports which need to be serialized.

* Remove no longer needed save_match() and ide_hwif_t.serialized.

v2:
* Set host's ->host_flags field instead of port's copy.

This patch should fix the incorrect grouping of port(s) from
host(s) that need serialization with port(s) that happen to use
the same IRQ(s) but are from the host(s) that don't need it.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since CY82C693 doesn't require serialization we may as well
use the default ide_pci chipset type.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_TRM290 host flag and use it in ide_build_dmatable().

* Remove no longer needed ide_trm290 chipset type.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ->max_sectors field to struct ide_port_info to allow host drivers
  to specify value used for hwif->rqsize (if smaller than the default).

* Convert pdc202xx_old to use ->max_sectors and remove no longer needed
  IDE_HFLAG_RQSIZE_256 flag.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtyltov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use pci_name(dev) instead of hwif->name in init_hwif_rz1000().

* init_hwif_rz1000() -> rz1000_init_chipset().  Update rz1000_init_one()
  to use rz1000_init_chipset() and add now required rz1000_remove().

* Remove superfluous ide_rz1000 chipset type.

v2:
* unsigned int rz1000_init_chipset() -> int rz1000_disable_readahead()
  per Sergei's suggestion.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set nIEN for previous port/device in ide_do_request()
  also if port uses a non-shared IRQ.

* Remove no longer needed ide_hwif_t.sharing_irq.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix nIEN quirk check to also omit quirky devices using pdc202xx_{new,old}
host drivers for which ->quirk_list == 2.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If IDE doubler is used ports need to be serialized.  Currently
init_irq() handles it fine but lets also set IDE_HFLAG_SERIALIZE
host flag explicitly in preparation for future changes.

Also convert the driver to use struct ide_port_info while at it.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set IDE_HFLAG_SERIALIZE explictly for CMD646.

* Remove no longer needed ide_cmd646 chipset type (which has
  a nice side-effect of fixing handling of unexpected IRQs).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

init_irq() shouldn't use IRQF_SHARED for ali14xx IDE IRQ handler.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It doesn't make much sense nowadays and is problematic on some drives.

Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Both choose_drive() and PM handling code make sure that the queue
is unplugged so no need to check it again.

Cc: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Now that (almost) all host drivers have been fixed not to abuse ide_lock
and core code usage of ide_lock has been sanitized we may safely replace
ide_lock by per-hwgroup locks.

This patch is partially based on earlier patch from Ravikiran G Thirumalai.

While at it:
- don't use deprecated HWIF() and HWGROUP() macros
- update locking documentation in ide.h

v2:
Add missing spin_lock_init(&hwgroup->lock).  (Noticed by Elias Oltmanns)

Cc: Vaibhav V. Nivargi <vaibhav.nivargi@gmail.com>
Cc: Alok N. Kataria <alokk@calsoftinc.com>
Cc: Shai Fultheim <shai@scalex86.org>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Cc: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is just a preparation for future changes and there should be no
functional changes caused by this patch since ide_lock is currently
also used as queue lock.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use blk_end_request() instead of ide_lock + __blk_end_request()
in cdrom_end_request(), cdrom_newpc_intr(), __ide_end_request(),
ide_complete_pm_request() and ide_end_drive_cmd().

[ ide_lock is currently also used as queue lock ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

__ide_end_request() needs ide_lock only for __blk_end_request()
call so push ide_lock taking inside __ide_end_requests().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While at it:
- no need to check for hwgroup presence in ide_dump_opcode()
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

[ and ide_cfg_mtx mutex provides a sufficient protection for callers ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

IDE settings are protected by ide_setting_mtx mutex so there is
no need to hold ide_lock in ide_setting_ioctl(), ide_read_setting()
and ide_proc_unregister_driver().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Just a preparation for future changes.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Commit 4dde4492 ("ide: make drive->id
an union (take 2)") accidentally introduced an IDE ACPI regression which
at least on some machines confuses ACPI and breaks suspend. Fix it.

Fixes kernel.org bug #12279:
http://bugzilla.kernel.org/show_bug.cgi?id=12279

[ Sorry about the bug (IDE ACPI is not used by default so it managed
  to slip in).  Still it is kind of surprising that the bug breaks
  suspend as it shouldn't impact anything except IDE ACPI (it seems
  that it uncovered either some ACPI/PM deficiency or a BIOS bug). ]
Reported-and-bisected-by: NDavid Roka <roka@dawid.hu>
Tested-by: NDavid Roka <roka@dawid.hu>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This fixes data corruption on PIO mode.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: stable <stable@kernel.org>
Cc: sshtylyov@ru.mvista.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This fixes data corruption on some heavy load.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: stable <stable@kernel.org>
Cc: sshtylyov@ru.mvista.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove some more cruft from machw.h and drop the #include where it isn't
needed.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>