This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1091) changes the way usbcore handles interface
unbinding.  If the interface's driver supports "soft" unbinding (a new
flag in the driver structure) then in-flight URBs are not cancelled
and endpoints are not disabled.  Instead the driver is allowed to
continue communicating with the device (although of course it should
stop before its disconnect routine returns).

The purpose of this change is to allow drivers to do a clean shutdown
when they get unbound from a device that is still plugged in.  Killing
all the URBs and disabling the endpoints before calling the driver's
disconnect method doesn't give the driver any control over what
happens, and it can leave devices in indeterminate states.  For
example, when usb-storage unbinds it doesn't want to stop while in the
middle of transmitting a SCSI command.

The soft_unbind flag is added because in the past, a number of drivers
have experienced problems related to ongoing I/O after their disconnect
routine returned.  Hence "soft" unbinding is made available only to
drivers that claim to support it.

The patch also replaces "interface_to_usbdev(intf)" with "udev" in a
couple of places, a minor simplification.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This changes usb_create_hcd() to be able to handle the fact that
pci_name() has changed to a constant string.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds some fields to NFLOG to be able to send the complete
hardware header with all necessary informations.
It sends to userspace:
 * the type of hardware link
 * the lenght of hardware header
 * the hardware header
Signed-off-by: NEric Leblond <eric@inl.fr>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are
still required, for example for "connbytes" extension. However, 64bit counters
waste a lot of memory and it was not possible to enable/disable it runtime.

This patch:
 - reimplements accounting with respect to the extension infrastructure,
 - makes one global version of seq_print_acct() instead of two seq_print_counters(),
 - makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n),
 - makes it possible to enable/disable it at runtime by sysctl or sysfs,
 - extends counters from 32bit to 64bit,
 - renames ip_conntrack_counter -> nf_conn_counter,
 - enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT),
 - set initial accounting enable state based on CONFIG_NF_CT_ACCT
 - removes buggy IPCT_COUNTER_FILLING event handling.

If accounting is enabled newly created connections get additional acct extend.
Old connections are not changed as it is not possible to add a ct_extend area
to confirmed conntrack. Accounting is performed for all connections with
acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct".
Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a bvec merge function for device mapper devices
for dynamic size restrictions.

This code ensures the requested biovec lies within a single
target and then calls a target-specific function to check
against any constraints imposed by underlying devices.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

All modifications and most access to the mddev->disks list are made
under the reconfig_mutex lock.  However there are three places where
the list is walked without any locking.  If a reconfig happens at this
time, havoc (and oops) can ensue.

So use RCU to protect these accesses:
  - wrap them in rcu_read_{,un}lock()
  - use list_for_each_entry_rcu
  - add to the list with list_add_rcu
  - delete from the list with list_del_rcu
  - delay the 'free' with call_rcu rather than schedule_work

Note that export_rdev did a list_del_init on this list.  In almost all
cases the entry was not in the list anymore so it was a no-op and so
safe.  It is no longer safe as after list_del_rcu we may not touch
the list_head.
An audit shows that export_rdev is called:
  - after unbind_rdev_from_array, in which case the delete has
     already been done,
  - after bind_rdev_to_array fails, in which case the delete isn't needed.
  - before the device has been put on a list at all (e.g. in
      add_new_disk where reading the superblock fails).
  - and in autorun devices after a failure when the device is on a
      different list.

So remove the list_del_init call from export_rdev, and add it back
immediately before the called to export_rdev for that last case.

Note also that ->same_set is sometimes used for lists other than
mddev->list (e.g. candidates).  In these cases rcu is not needed.
Signed-off-by: NNeilBrown <neilb@suse.de>

Open isn't the only thing that increments ->active.  e.g. reading
/proc/mdstat will increment it briefly.  So to avoid false positives
in testing for concurrent access, introduce a new counter that counts
just the number of times the md device it open.
Signed-off-by: NNeilBrown <neilb@suse.de>

Signed-off-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NNeilBrown <neilb@suse.de>

This patch renames the array_size field of struct mddev_s to array_sectors
and converts all instances to use units of 512 byte sectors instead of 1k
blocks.
Signed-off-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NNeilBrown <neilb@suse.de>

Move more bits into the tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch cyclades to use the new tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch the stallion driver to use the tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch istallion to use the new tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch drivers using the old "generic serial" driver to use the tty_port
structures
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch esp to use the new tty_port structures
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coding style clean up and white space tidy
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every tty driver has its own concept of a port structure and because
they all differ we cannot extract commonality.  Begin fixing this by
creating a structure drivers can elect to use so that over time we can
push fields into this and create commonality and then introduce common
methods.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The bus_shift parameter in platform_data is not needed
as we can tell the driver with the IOMEM_RESOURCE whether
the ASIC is located on a 16bit or 32bit memory bus.

The htc-egpio driver uses a more descriptive bus_width parameter,
but for drivers where the register map size fixed, we don't even
need this.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

There is a dedicated ds1wm driver, no need to duplicate this
information here.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

As ASIC3 GPIO alternate function configuration is expected to be similar
for several devices, it is convenient to define descriptive macros. This
patch is inspired by the PXA MFP configuration, the alternate functions
were observed on hx4700 and blueangel.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

Let's be consistent and use uppercase only, for both macro and defines.
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

The ASIC3 GPIO configuration code is a bit obscure and hardly readable.
This patch changes it so that it is now more readable and understandable,
by being more explicit.
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Platform devices should be dynamically allocated, and each supported
device should have its own platform data.
For now we just remove this buggy code.
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

ASIC3 is, among other things, a GPIO extender. We should thus have it
supporting the current gpiolib API.
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

The tvaudio driver is using "official" I2C device IDs for internal
purpose. There must be some historical reason behind this but anyway,
it shouldn't do that. As the stored values are never used, the easiest
way to fix the problem is simply to remove them altogether.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

I2C_HW_SMBUS_OVFX2 is referenced in ovcamchip_core.c, but no bus uses
this driver ID, so we can remove the reference. As far as I can see,
the Cypress FX2 webcam is handled by a different driver (dvb-usb).
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

videodev2: New pixfmt
pac207:   Remove the specific decoding.
main:     get_buff_size operation added for the subdriver.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The low (half) res modes of the spca561 are not spca561 compressed, but are
raw bayer, this patches fixes this and adds a PIX_FMT define for the GBRG
bayer format used by the spca561 in low res mode.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- remaning subdrivers added
- remove the decoding helper and some specific frame decodings
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Flush the shadow mmu before removing regions to avoid stale entries.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvmtrace is not portable. This will prevent from copying a
trace file from big-endian target to little-endian workstation for analysis.
In the patch, kernel outputs metadata containing a magic number to trace
log, and changes 64-bit words to be u64 instead of a pair of u32s.
Signed-off-by: NTan Li <li.tan@intel.com>
Acked-by: NJerone Young <jyoung5@us.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch adds all needed structures to coalesce MMIOs.
Until an architecture uses it, it is not compiled.

Coalesced MMIO introduces two ioctl() to define where are the MMIO zones that
can be coalesced:

- KVM_REGISTER_COALESCED_MMIO registers a coalesced MMIO zone.
  It requests one parameter (struct kvm_coalesced_mmio_zone) which defines
  a memory area where MMIOs can be coalesced until the next switch to
  user space. The maximum number of MMIO zones is KVM_COALESCED_MMIO_ZONE_MAX.

- KVM_UNREGISTER_COALESCED_MMIO cancels all registered zones inside
  the given bounds (bounds are also given by struct kvm_coalesced_mmio_zone).

The userspace client can check kernel coalesced MMIO availability by asking
ioctl(KVM_CHECK_EXTENSION) for the KVM_CAP_COALESCED_MMIO capability.
The ioctl() call to KVM_CAP_COALESCED_MMIO will return 0 if not supported,
or the page offset where will be stored the ring buffer.
The page offset depends on the architecture.

After an ioctl(KVM_RUN), the first page of the KVM memory mapped points to
a kvm_run structure. The offset given by KVM_CAP_COALESCED_MMIO is
an offset to the coalesced MMIO ring expressed in PAGE_SIZE relatively
to the address of the start of th kvm_run structure. The MMIO ring buffer
is defined by the structure kvm_coalesced_mmio_ring.

[akio: fix oops during guest shutdown]
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAkio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).

This modification allows to use kvm_io_device with coalesced MMIO.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Obsoleted by the vmx-specific per-cpu list.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add size table functions for qdiscs and calculate packet size in
qdisc_enqueue().

Based on patch by Patrick McHardy
 http://marc.info/?l=linux-netdev&m=115201979221729&w=2Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>