drm vblank initialization keeps track of the changes in driver-supplied
frame counts across vt switch and mode setting, but only if you let it by
not tearing down the drm vblank structure.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Now that the radeon driver has suspend/resume functions, it needs to map its
registers at load time or it will likely crash if a suspend operation occurs
before the driver has been initialized.

This patch moves the register mapping code from firstopen to load and makes
the mapping into a _DRM_DRIVER one so that the core won't remove it at
lastclose time.

Fixes (at least partially) kernel bz #11891.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

rs400/480 are like previous chips not like rs6xx chips.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Someone noticed these registers moved around for later chips,
so we redo the codepaths per-chip. PCIE chips don't appear to
require explicit enables.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds support for the RS400 family of IGPs for Intel CPUs.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds support for the HS2100 IGP chipset.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Previously, drivers supporting vblank interrupt waits would run the interrupt
all the time, or all the time that any 3d client was running, preventing the
CPU from sleeping for long when the system was otherwise idle.  Now, interrupts
are disabled any time that no client is waiting on a vblank event. The new
method uses vblank counters on the chipsets when the interrupts are turned
off, rather than counting interrupts, so that we can continue to present
accurate vblank numbers.

Co-author: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make writeback not get disabled on resume.
Signed-off-by: NDave Airlie <airlied@redhat.com>

If this triggers its bad, however some machines seem to have been
triggering it for ages and we didn't know until we added the debug.

So downgrade the debug now so people don't call this a regression.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch should fix hard lockup and convert them in
softlockup (ie you can ssh the box but the gpu is busted
and we are waiting in loop for it to come back to reason).
Signed-off-by: NDave Airlie <airlied@redhat.com>

With new userspace libpciaccess we can get a conflicting mapping
on the PCIE GART table in the video RAM. Always try and map it _wc.
Signed-off-by: NDave Airlie <airlied@redhat.com>

With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.
Signed-off-by: NDave Airlie <airlied@redhat.com>

According to the hw guys, you should use DSTCACHE_CTLSTAT to flush
the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes performance drop after suspend/resume on some systems.
Signed-off-by: NDave Airlie <airlied@redhat.com>

AGP registers weren't programmed properly for r500 cards.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This inits the card pipes in the kernel and lets userspace getparam
the correct setup.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cleanup do engine reset for different chip families.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

We only support RS480 (AMD based IGP) at the moment not
RS400 (Intel based IGP) ones.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Docs state bits 4-11 maps to bits 32-39 of the 40-bit range
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds production microcode for r100->r500 from AMD.
Signed-off-by: NDave Airlie <airlied@redhat.com>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a problem on 64-bit with 4GB with ATI RS690 chipsets. It
makes sure the pcigart table is allocated in coherent memory for DMA operations.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds support for configuring the RS690 GART.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds CP support for the r500 series of chips, and allows
accel 2D support on these chips with a new radeon driver.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@linux.ie>

As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.

airlied:- I cleaned up a few that this patch missed also
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

This code relied on the CPU and GPU address for the aperture being the same,
On some r5xx hardware I was playing with I noticed that this isn't always true.
This fixes issues seen on some r400 cards. (bugs.freedesktop.org 9957)
Signed-off-by: NDave Airlie <airlied@redhat.com>

The data is now in kernel space, copied in/out as appropriate according to t
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures.  This also means that XFree86 4.2.0 support for i810 DR
is lost.
Signed-off-by: NDave Airlie <airlied@linux.ie>

As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM.  There is a 1:1 mapping, so this
should be a noop.  This could be a minor performance improvement, as everyth
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioct
went the other direction.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This was used to make all ioctl handlers return -errno on linux and errno on
*BSD.  Instead, just return -errno in shared code, and flip sign on return f
shared code to *BSD code.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

some drivers still todo.
Signed-off-by: NDave Airlie <airlied@linux.ie>